u-boot/arch/mips/dts/luton_pcb091.dts
Horatiu Vultur ee7b65f2cc mips: mscc: luton: Add ethernet nodes for Luton.
Add nodes for pcb090 and pcb091. There is currently no support
in Linux for this SoC.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01 14:13:36 +01:00

114 lines
1.5 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
/dts-v1/;
#include "mscc,luton.dtsi"
/ {
model = "Luton10 PCB091 Reference Board";
compatible = "mscc,luton-pcb091", "mscc,luton";
aliases {
serial0 = &uart0;
spi0 = &spi0;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
top_dimmer {
label = "pcb091:top:dimmer";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
default-state = "on";
};
status_green {
label = "pcb091:green:status";
gpios = <&sgpio 26 GPIO_ACTIVE_HIGH>; /* p26.0 */
default-state = "on";
};
status_red {
label = "pcb091:red:status";
gpios = <&sgpio 58 GPIO_ACTIVE_HIGH>; /* p26.1 */
default-state = "off";
};
};
};
&sgpio {
status = "okay";
mscc,sgpio-ports = <0xFFF000FF>;
};
&uart0 {
status = "okay";
};
&spi0 {
status = "okay";
spi-flash@0 {
compatible = "spi-flash";
spi-max-frequency = <18000000>; /* input clock */
reg = <0>; /* CS0 */
spi-cs-high;
};
};
&mdio0 {
status = "okay";
};
&port0 {
phy-handle = <&phy0>;
};
&port1 {
phy-handle = <&phy1>;
};
&port2 {
phy-handle = <&phy2>;
};
&port3 {
phy-handle = <&phy3>;
};
&port4 {
phy-handle = <&phy4>;
};
&port5 {
phy-handle = <&phy5>;
};
&port6 {
phy-handle = <&phy6>;
};
&port7 {
phy-handle = <&phy7>;
};
&port8 {
phy-handle = <&phy8>;
};
&port9 {
phy-handle = <&phy9>;
};
&port10 {
phy-handle = <&phy10>;
};
&port11 {
phy-handle = <&phy11>;
};