mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 06:04:34 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| lpddr4_timing.h | ||
| lpddr4_timing_1gb.c | ||
| lpddr4_timing_2gb.c | ||
| lpddr4_timing_3gb.c | ||
| lpddr4_timing_4gb.c | ||
| MAINTAINERS | ||
| Makefile | ||
| pico-imx8mq.c | ||
| README | ||
| spl.c | ||
U-Boot for the Technexion Pico i.MX8MQ Quick Start =========== - Build the TFA binary - Get DDR and HDMI firmware - Build U-Boot - Boot Get and Build the TFA blob ========================== Note: srctree is U-Boot source directory Get ATF from: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git branch: master $ CROSS_COMPILE=aarch64-linux-gnu- make PLAT=imx8mq bl31 $ cp build/imx8mq/release/bl31.bin $(builddir) Get the DDR and HDMI firmware ============================= $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin $ chmod +x firmware-imx-7.9.bin $ ./firmware-imx-7.9.bin # Or use this to avoid running random scripts from the internet, # but note that you must agree to the license the script displays: # $ dd if=firmware-imx-7.9.bin of=firmware-imx-7.9.tar.bz2 bs=38868 skip=1 # $ tar -xf firmware-imx-7.9.tar.bz2 $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir) $ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) Build U-Boot ============ $ export CROSS_COMPILE=aarch64-poky-linux- $ make pico-imx8mq_defconfig $ make flash.bin Burn the flash.bin to MicroSD card offset 33KB $ dd if=flash.bin of=/dev/mmcblkX bs=1024 seek=33 Or into eMMC from a running system $ dhcp flash.bin && mmc write $loadaddr 0x42 0x800 Boot ==== "o" denotes a pin "[]" denotes two pins bridged by a jumper eMMC boot: J1 o[] []o J2 []o o[] USB upload via USB-C connector: J1 ooo ooo J2 o[] []o