u-boot/arch/arm/cpu/armv7/sunxi/board.c
Hans de Goede fc70300136 sunxi: Add CONFIG_MACPWR option
On some boards the ethernet-phy needs to be powered up through a gpio,
add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31 15:37:23 +02:00

155 lines
3.6 KiB
C

/*
* (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
*
* (C) Copyright 2007-2011
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*
* Some init for sunxi platform.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <netdev.h>
#include <miiphy.h>
#include <serial.h>
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
#endif
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/timer.h>
#include <linux/compiler.h>
#ifdef CONFIG_SPL_BUILD
/* Pointer to the global data structure for SPL */
DECLARE_GLOBAL_DATA_PTR;
/* The sunxi internal brom will try to loader external bootloader
* from mmc0, nand flash, mmc2.
* Unfortunately we can't check how SPL was loaded so assume
* it's always the first SD/MMC controller
*/
u32 spl_boot_device(void)
{
return BOOT_DEVICE_MMC1;
}
/* No confirmation data available in SPL yet. Hardcode bootmode */
u32 spl_boot_mode(void)
{
return MMCSD_MODE_RAW;
}
#endif
int gpio_init(void)
{
#if CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I))
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX);
sunxi_gpio_set_pull(SUNXI_GPB(20), 1);
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
sunxi_gpio_set_pull(SUNXI_GPG(4), 1);
#else
#error Unsupported console port number. Please fix pin mux settings in board.c
#endif
return 0;
}
void reset_cpu(ulong addr)
{
static const struct sunxi_wdog *wdog =
&((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
/* Set the watchdog for its shortest interval (.5s) and wait */
writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
while (1) {
/* sun5i sometimes gets stuck without this */
writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
}
}
/* do some early init */
void s_init(void)
{
#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
"orr r0, r0, #1 << 6\n"
"mcr p15, 0, r0, c1, c0, 1\n");
#endif
clock_init();
timer_init();
gpio_init();
i2c_init_board();
#ifdef CONFIG_SPL_BUILD
gd = &gdata;
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
/* Needed early by sunxi_board_init if PMU is enabled */
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
sunxi_board_init();
#endif
}
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
#ifdef CONFIG_CMD_NET
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int cpu_eth_init(bd_t *bis)
{
__maybe_unused int rc;
#ifdef CONFIG_MACPWR
gpio_direction_output(CONFIG_MACPWR, 1);
mdelay(200);
#endif
#ifdef CONFIG_SUNXI_EMAC
rc = sunxi_emac_initialize(bis);
if (rc < 0) {
printf("sunxi: failed to initialize emac\n");
return rc;
}
#endif
#ifdef CONFIG_SUNXI_GMAC
rc = sunxi_gmac_initialize(bis);
if (rc < 0) {
printf("sunxi: failed to initialize gmac\n");
return rc;
}
#endif
return 0;
}
#endif