u-boot/arch/x86/lib/i8259.c
Simon Glass f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00

129 lines
2.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*/
/*
* This file provides the interrupt handling functionality for systems
* based on the standard PC/AT architecture using two cascaded i8259
* Programmable Interrupt Controllers.
*/
#include <common.h>
#include <log.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/ibmpc.h>
#include <asm/interrupt.h>
int i8259_init(void)
{
u8 i;
/* Mask all interrupts */
outb(0xff, MASTER_PIC + IMR);
outb(0xff, SLAVE_PIC + IMR);
/*
* Master PIC
* Place master PIC interrupts at INT20
*/
outb(ICW1_SEL | ICW1_EICW4, MASTER_PIC + ICW1);
outb(0x20, MASTER_PIC + ICW2);
outb(IR2, MASTER_PIC + ICW3);
outb(ICW4_PM, MASTER_PIC + ICW4);
for (i = 0; i < 8; i++)
outb(OCW2_SEOI | i, MASTER_PIC + OCW2);
/*
* Slave PIC
* Place slave PIC interrupts at INT28
*/
outb(ICW1_SEL | ICW1_EICW4, SLAVE_PIC + ICW1);
outb(0x28, SLAVE_PIC + ICW2);
outb(0x02, SLAVE_PIC + ICW3);
outb(ICW4_PM, SLAVE_PIC + ICW4);
for (i = 0; i < 8; i++)
outb(OCW2_SEOI | i, SLAVE_PIC + OCW2);
/*
* Enable cascaded interrupts by unmasking the cascade IRQ pin of
* the master PIC
*/
unmask_irq(2);
/* Interrupt 9 should be level triggered (SCI). The OS might do this */
configure_irq_trigger(9, true);
return 0;
}
void mask_irq(int irq)
{
int imr_port;
if (irq >= SYS_NUM_IRQS)
return;
if (irq > 7)
imr_port = SLAVE_PIC + IMR;
else
imr_port = MASTER_PIC + IMR;
outb(inb(imr_port) | (1 << (irq & 7)), imr_port);
}
void unmask_irq(int irq)
{
int imr_port;
if (irq >= SYS_NUM_IRQS)
return;
if (irq > 7)
imr_port = SLAVE_PIC + IMR;
else
imr_port = MASTER_PIC + IMR;
outb(inb(imr_port) & ~(1 << (irq & 7)), imr_port);
}
void specific_eoi(int irq)
{
if (irq >= SYS_NUM_IRQS)
return;
if (irq > 7) {
/*
* IRQ is on the slave - Issue a corresponding EOI to the
* slave PIC and an EOI for IRQ2 (the cascade interrupt)
* on the master PIC
*/
outb(OCW2_SEOI | (irq & 7), SLAVE_PIC + OCW2);
irq = SEOI_IR2;
}
outb(OCW2_SEOI | irq, MASTER_PIC + OCW2);
}
void configure_irq_trigger(int int_num, bool is_level_triggered)
{
u16 int_bits = inb(ELCR1) | (((u16)inb(ELCR2)) << 8);
debug("%s: current interrupts are 0x%x\n", __func__, int_bits);
if (is_level_triggered)
int_bits |= (1 << int_num);
else
int_bits &= ~(1 << int_num);
/* Write new values */
debug("%s: try to set interrupts 0x%x\n", __func__, int_bits);
outb((u8)(int_bits & 0xff), ELCR1);
outb((u8)(int_bits >> 8), ELCR2);
}