u-boot/include/configs/r2dplus.h
Nobuhiro Iwamatsu c8d4727917 sh: r2dplus: Add support zimageboot
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-01-11 21:03:26 +09:00

128 lines
3.6 KiB
C

#ifndef __CONFIG_H
#define __CONFIG_H
#undef DEBUG
#define CONFIG_SH 1
#define CONFIG_SH4 1
#define CONFIG_CPU_SH7751 1
#define CONFIG_CPU_SH_TYPE_R 1
#define CONFIG_R2DPLUS 1
#define __LITTLE_ENDIAN__ 1
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_DFL
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_PCI
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_IDE
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_SH_ZIMAGEBOOT
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_SCIF1 1
#define BOARD_LATE_INIT 1
#define CONFIG_BOOTDELAY -1
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_ENV_OVERWRITE 1
/* SDRAM */
#define CONFIG_SYS_SDRAM_BASE (0x8C000000)
#define CONFIG_SYS_SDRAM_SIZE (0x04000000)
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE 512
/* List of legal baudrate settings for this board */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
/* Address of u-boot image in Flash */
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
/* Size of DRAM reserved for malloc() use */
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
/* size in bytes reserved for initial data */
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/*
* NOR Flash ( Spantion S29GL256P )
*/
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE (0xA0000000)
#define CONFIG_SYS_MAX_FLASH_BANKS (1)
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x40000
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
/*
* SuperH Clock setting
*/
#define CONFIG_SYS_CLK_FREQ 60000000
#define CONFIG_SYS_TMU_CLK_DIV 4
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */
/*
* IDE support
*/
#define CONFIG_IDE_RESET 1
#define CONFIG_SYS_PIO_MODE 1
#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */
#define CONFIG_SYS_IDE_MAXDEVICE 1
#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */
#define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */
#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */
#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */
#define CONFIG_IDE_SWAP_IO
/*
* SuperH PCI Bridge Configration
*/
#define CONFIG_PCI
#define CONFIG_SH4_PCI
#define CONFIG_SH7751_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW 1
#define __io
#define __mem_pci
#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
#define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */
#define CONFIG_PCI_SYS_BUS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
#define CONFIG_PCI_SYS_PHYS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
/*
* Network device (RTL8139) support
*/
#define CONFIG_NET_MULTI
#define CONFIG_RTL8139
#endif /* __CONFIG_H */