mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
2b41e19cc5
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Adam Ford <aford173@gmail.com> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
44 lines
2.1 KiB
Text
44 lines
2.1 KiB
Text
This document describes the instruction to build and flash ATF/OPTEE/U-Boot on
|
|
pico-imx7d board. U-Boot is loaded as part of FIP image by ATF in this setup.
|
|
The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure
|
|
world in this case.
|
|
|
|
- Build u-boot
|
|
Set environment variable of CROSS_COMPILE for your toolchain
|
|
$ make pico-imx7d_bl33_defconfig
|
|
$ make all
|
|
|
|
- Download and build OPTEE
|
|
$ git clone git@github.com:OP-TEE/optee_os.git
|
|
$ make PLATFORM=imx PLATFORM_FLAVOR=mx7dpico_mbl CFG_BOOT_SECONDARY_REQUEST=y ARCH=arm
|
|
|
|
- Download and build ATF
|
|
$ git clone https://git.linaro.org/landing-teams/working/mbl/arm-trusted-firmware.git -b linaro-imx7
|
|
$ make DEBUG=1 PLAT=picopi ARCH=aarch32 ARM_ARCH_MAJOR=7 \
|
|
CROSS_COMPILE=arm-linux-gnueabihf- LOG_LEVEL=50 V=1 \
|
|
CRASH_REPORTING=1 AARCH32_SP=optee all
|
|
Save file content in this link to file pico-imx7d.cfg:
|
|
http://git.linaro.org/landing-teams/working/mbl/u-boot.git/tree/board/technexion/pico-imx7d/pico-imx7d.cfg?h=linaro-imx
|
|
$ u-boot/tools/mkimage -n pico-imx7d.cfg -T imximage -e 0x9df00000 -d \
|
|
build/picopi/debug/bl2.bin bl2.imx
|
|
|
|
- Create FIP image
|
|
Create a fiptool_images/ folder in ATF folder, copy u-boot.bin in u-boot
|
|
folder and tee*.bin in optee out/arm-plat-imx/core/tee/ folder to
|
|
fiptool_images. Run below command in ATF folder to generate FIP image.
|
|
$ make -C tools/fiptool/
|
|
$ tools/fiptool/fiptool create --tos-fw fiptool_images/tee-header_v2.bin \
|
|
--tos-fw-extra1 fiptool_images/tee-pager_v2.bin \
|
|
--tos-fw-extra2 fiptool_images/tee-pageable_v2.bin \
|
|
--nt-fw fiptool_images/u-boot.bin \
|
|
fip.bin
|
|
|
|
- Burn the images to eMMC for test.
|
|
Run below command in atf folder:
|
|
$ dd if=build/picopi/debug/bl2.bin.imx of=/dev/disk/by-id/usb-<your device> bs=1024 seek=1;sync
|
|
$ dd if=fip.bin of=/dev/disk/by-id/usb-<your device> bs=1024 seek=1;sync
|
|
|
|
- Test
|
|
Just boot up your board and wait for u-boot start up after ATF's log.
|
|
For booting Linux in FIT image, please reference the FIT files in
|
|
u-boot doc/uImage.FIT/ folder.
|