mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
58d258c8c4
Since commit103c5f1806
("mmc: Rename MMC_SUPPORT to MMC"), SPL_MMC_SUPPORT is named SPL_MMC, so let's fix the ifdef. Fixes:fbc6b14143
("imx: imx8mp_rsb3720a1: convert to DM_SERIAL") Cc: Quentin Schulz <foss+uboot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
222 lines
4.7 KiB
C
222 lines
4.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2019 NXP
|
|
* Copyright 2022 Linaro
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dwc3-uboot.h>
|
|
#include <efi.h>
|
|
#include <efi_loader.h>
|
|
#include <errno.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <spl.h>
|
|
#include <usb.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <asm/arch/imx8mp_pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/mach-imx/gpio.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/mach-imx/dma.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <power/pmic.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_NAND_MXS
|
|
static void setup_gpmi_nand(void)
|
|
{
|
|
init_nand_clk();
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
|
|
struct efi_fw_image fw_images[] = {
|
|
#if defined(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)
|
|
{
|
|
.image_type_id = IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID,
|
|
.fw_name = u"IMX8MP-RSB3720-FIT",
|
|
.image_index = 1,
|
|
},
|
|
#elif defined(CONFIG_TARGET_IMX8MP_RSB3720A1_6G)
|
|
{
|
|
.image_type_id = IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID,
|
|
.fw_name = u"IMX8MP-RSB3720-FIT",
|
|
.image_index = 1,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
struct efi_capsule_update_info update_info = {
|
|
.dfu_string = "mmc 2=flash-bin raw 0 0x1B00 mmcpart 1",
|
|
.images = fw_images,
|
|
};
|
|
|
|
u8 num_image_type_guids = ARRAY_SIZE(fw_images);
|
|
#endif /* EFI_HAVE_CAPSULE_SUPPORT */
|
|
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
init_uart_clk(2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
#define FEC_RST_PAD IMX_GPIO_NR(4, 2)
|
|
static const iomux_v3_cfg_t fec1_rst_pads[] = {
|
|
MX8MP_PAD_SAI1_RXD0__GPIO4_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_fec(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
|
|
ARRAY_SIZE(fec1_rst_pads));
|
|
|
|
gpio_request(FEC_RST_PAD, "fec1_rst");
|
|
gpio_direction_output(FEC_RST_PAD, 0);
|
|
mdelay(15);
|
|
gpio_direction_output(FEC_RST_PAD, 1);
|
|
mdelay(100);
|
|
}
|
|
|
|
static int setup_fec(void)
|
|
{
|
|
struct iomuxc_gpr_base_regs *gpr =
|
|
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
|
|
|
|
setup_iomux_fec();
|
|
|
|
/* Enable RGMII TX clk output */
|
|
setbits_le32(&gpr->gpr[1], BIT(22));
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_FEC_MXC */
|
|
|
|
#ifdef CONFIG_DWC_ETH_QOS
|
|
#define EQOS_RST_PAD IMX_GPIO_NR(4, 22)
|
|
static const iomux_v3_cfg_t eqos_rst_pads[] = {
|
|
MX8MP_PAD_SAI2_RXC__GPIO4_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_eqos(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(eqos_rst_pads,
|
|
ARRAY_SIZE(eqos_rst_pads));
|
|
|
|
gpio_request(EQOS_RST_PAD, "eqos_rst");
|
|
gpio_direction_output(EQOS_RST_PAD, 0);
|
|
mdelay(15);
|
|
gpio_direction_output(EQOS_RST_PAD, 1);
|
|
mdelay(100);
|
|
}
|
|
|
|
static int setup_eqos(void)
|
|
{
|
|
struct iomuxc_gpr_base_regs *gpr =
|
|
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
|
|
|
|
setup_iomux_eqos();
|
|
|
|
/* set INTF as RGMII, enable RGMII TXC clock */
|
|
clrsetbits_le32(&gpr->gpr[1],
|
|
IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16));
|
|
setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21));
|
|
|
|
return set_clk_eqos(ENET_125MHZ);
|
|
}
|
|
#endif /* CONFIG_DWC_ETH_QOS */
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
if (IS_ENABLED(CONFIG_FEC_MXC) || IS_ENABLED(CONFIG_DWC_ETH_QOS)) {
|
|
/* enable rgmii rxc skew and phy mode select to RGMII copper */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
|
|
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DISPMIX 13
|
|
#define MIPI 15
|
|
|
|
#define WDOG_TRIG IMX_GPIO_NR(4, 20)
|
|
|
|
static iomux_v3_cfg_t wdt_trig[] = {
|
|
MX8MP_PAD_SAI1_MCLK__GPIO4_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_wdt(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(wdt_trig, ARRAY_SIZE(wdt_trig));
|
|
gpio_request(WDOG_TRIG, "wdt_trig");
|
|
gpio_direction_output(WDOG_TRIG, 1);
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
#ifdef CONFIG_FEC_MXC
|
|
setup_fec();
|
|
#endif
|
|
|
|
#ifdef CONFIG_DWC_ETH_QOS
|
|
/* clock, pin, gpr */
|
|
setup_eqos();
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_MXS
|
|
setup_gpmi_nand();
|
|
#endif
|
|
|
|
setup_iomux_wdt();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) {
|
|
env_set("board_name", "RSB3720A1");
|
|
env_set("board_rev", "iMX8MP");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_MMC
|
|
#define UBOOT_RAW_SECTOR_OFFSET 0x40
|
|
unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc)
|
|
{
|
|
u32 boot_dev = spl_boot_device();
|
|
|
|
switch (boot_dev) {
|
|
case BOOT_DEVICE_MMC2:
|
|
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - UBOOT_RAW_SECTOR_OFFSET;
|
|
default:
|
|
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR;
|
|
}
|
|
}
|
|
#endif /* CONFIG_SPL_MMC */
|