u-boot/arch/i386/cpu/sc520/sc520.c
Graeme Russ 6d0cb34954 sc520: Remove printf calls from cpu_init_f
In later patches, cpu_init_f will be called before console has been
initialised and printf will not be legitimately available
2011-02-12 15:11:40 +11:00

180 lines
4.5 KiB
C
Raw Blame History

/*
* (C) Copyright 2002
* Daniel Engstr<74>m, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* stuff specific for the sc520,
* but idependent of implementation */
#include <common.h>
#include <asm/io.h>
#include <asm/processor-flags.h>
#include <asm/ic/sc520.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* utility functions for boards based on the AMD sc520
*
* void init_sc520(void)
* unsigned long init_sc520_dram(void)
*/
sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)SC520_MMCR_BASE;
int cpu_init_f(void)
{
if (CONFIG_SYS_SC520_HIGH_SPEED) {
/* set it to 133 MHz and write back */
writeb(0x02, &sc520_mmcr->cpuctl);
gd->cpu_clk = 133000000;
} else {
/* set it to 100 MHz and write back */
writeb(0x01, &sc520_mmcr->cpuctl);
gd->cpu_clk = 100000000;
}
/* wait at least one millisecond */
asm("movl $0x2000, %%ecx\n"
"0: pushl %%ecx\n"
"popl %%ecx\n"
"loop 0b\n": : : "ecx");
/* turn on the SDRAM write buffer */
writeb(0x11, &sc520_mmcr->dbctl);
return x86_cpu_init_f();
}
unsigned long init_sc520_dram(void)
{
bd_t *bd = gd->bd;
u32 dram_present=0;
u32 dram_ctrl;
#ifdef CONFIG_SYS_SDRAM_DRCTMCTL
/* these memory control registers are set up in the assember part,
* in sc520_asm.S, during 'mem_init'. If we muck with them here,
* after we are running a stack in RAM, we have troubles. Besides,
* these refresh and delay values are better ? simply specified
* outright in the include/configs/{cfg} file since the HW designer
* simply dictates it.
*/
#else
u8 tmp;
u8 val;
int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY;
int refresh_rate = CONFIG_SYS_SDRAM_REFRESH_RATE;
int ras_cas_delay = CONFIG_SYS_SDRAM_RAS_CAS_DELAY;
/* set SDRAM speed here */
refresh_rate /= 78;
if (refresh_rate <= 1) {
val = 0; /* 7.8us */
} else if (refresh_rate == 2) {
val = 1; /* 15.6us */
} else if (refresh_rate == 3 || refresh_rate == 4) {
val = 2; /* 31.2us */
} else {
val = 3; /* 62.4us */
}
tmp = (readb(&sc520_mmcr->drcctl) & 0xcf) | (val<<4);
writeb(tmp, &sc520_mmcr->drcctl);
val = readb(&sc520_mmcr->drctmctl) & 0xf0;
if (cas_precharge_delay==3) {
val |= 0x04; /* 3T */
} else if (cas_precharge_delay==4) {
val |= 0x08; /* 4T */
} else if (cas_precharge_delay>4) {
val |= 0x0c;
}
if (ras_cas_delay > 3) {
val |= 2;
} else {
val |= 1;
}
writeb(val, &c520_mmcr->drctmctl);
#endif
/*
* We read-back the configuration of the dram
* controller that the assembly code wrote
*/
dram_ctrl = readl(&sc520_mmcr->drcbendadr);
bd->bi_dram[0].start = 0;
if (dram_ctrl & 0x80) {
/* bank 0 enabled */
dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
bd->bi_dram[0].size = bd->bi_dram[1].start;
} else {
bd->bi_dram[0].size = 0;
bd->bi_dram[1].start = bd->bi_dram[0].start;
}
if (dram_ctrl & 0x8000) {
/* bank 1 enabled */
dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start;
} else {
bd->bi_dram[1].size = 0;
bd->bi_dram[2].start = bd->bi_dram[1].start;
}
if (dram_ctrl & 0x800000) {
/* bank 2 enabled */
dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start;
} else {
bd->bi_dram[2].size = 0;
bd->bi_dram[3].start = bd->bi_dram[2].start;
}
if (dram_ctrl & 0x80000000) {
/* bank 3 enabled */
dram_present = (dram_ctrl & 0x7f000000) >> 2;
bd->bi_dram[3].size = dram_present - bd->bi_dram[3].start;
} else {
bd->bi_dram[3].size = 0;
}
gd->ram_size = dram_present;
return dram_present;
}
#ifdef CONFIG_SYS_SC520_RESET
void reset_cpu(ulong addr)
{
printf("Resetting using SC520 MMCR\n");
/* Write a '1' to the SYS_RST of the RESCFG MMCR */
writeb(0x01, &sc520_mmcr->rescfg);
/* NOTREACHED */
}
#endif