mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
110bdee00f
At present sandbox has its own table of supported SPI flash chips. Now that the SPI flash system is fully consolidated and has its own list, sandbox should use that. This enables us to expand the number of chips that sandbox supports. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
445 lines
11 KiB
C
445 lines
11 KiB
C
/*
|
|
* Simulate a SPI flash
|
|
*
|
|
* Copyright (c) 2011-2013 The Chromium OS Authors.
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <os.h>
|
|
|
|
#include <spi_flash.h>
|
|
#include "sf_internal.h"
|
|
|
|
#include <asm/getopt.h>
|
|
#include <asm/spi.h>
|
|
#include <asm/state.h>
|
|
|
|
/*
|
|
* The different states that our SPI flash transitions between.
|
|
* We need to keep track of this across multiple xfer calls since
|
|
* the SPI bus could possibly call down into us multiple times.
|
|
*/
|
|
enum sandbox_sf_state {
|
|
SF_CMD, /* default state -- we're awaiting a command */
|
|
SF_ID, /* read the flash's (jedec) ID code */
|
|
SF_ADDR, /* processing the offset in the flash to read/etc... */
|
|
SF_READ, /* reading data from the flash */
|
|
SF_WRITE, /* writing data to the flash, i.e. page programming */
|
|
SF_ERASE, /* erase the flash */
|
|
SF_READ_STATUS, /* read the flash's status register */
|
|
SF_READ_STATUS1, /* read the flash's status register upper 8 bits*/
|
|
};
|
|
|
|
static const char *sandbox_sf_state_name(enum sandbox_sf_state state)
|
|
{
|
|
static const char * const states[] = {
|
|
"CMD", "ID", "ADDR", "READ", "WRITE", "ERASE", "READ_STATUS",
|
|
};
|
|
return states[state];
|
|
}
|
|
|
|
/* Bits for the status register */
|
|
#define STAT_WIP (1 << 0)
|
|
#define STAT_WEL (1 << 1)
|
|
|
|
/* Assume all SPI flashes have 3 byte addresses since they do atm */
|
|
#define SF_ADDR_LEN 3
|
|
|
|
#define IDCODE_LEN 3
|
|
|
|
/* Used to quickly bulk erase backing store */
|
|
static u8 sandbox_sf_0xff[0x1000];
|
|
|
|
/* Internal state data for each SPI flash */
|
|
struct sandbox_spi_flash {
|
|
/*
|
|
* As we receive data over the SPI bus, our flash transitions
|
|
* between states. For example, we start off in the SF_CMD
|
|
* state where the first byte tells us what operation to perform
|
|
* (such as read or write the flash). But the operation itself
|
|
* can go through a few states such as first reading in the
|
|
* offset in the flash to perform the requested operation.
|
|
* Thus "state" stores the exact state that our machine is in
|
|
* while "cmd" stores the overall command we're processing.
|
|
*/
|
|
enum sandbox_sf_state state;
|
|
uint cmd;
|
|
/* Erase size of current erase command */
|
|
uint erase_size;
|
|
/* Current position in the flash; used when reading/writing/etc... */
|
|
uint off;
|
|
/* How many address bytes we've consumed */
|
|
uint addr_bytes, pad_addr_bytes;
|
|
/* The current flash status (see STAT_XXX defines above) */
|
|
u16 status;
|
|
/* Data describing the flash we're emulating */
|
|
const struct spi_flash_params *data;
|
|
/* The file on disk to serv up data from */
|
|
int fd;
|
|
};
|
|
|
|
static int sandbox_sf_setup(void **priv, const char *spec)
|
|
{
|
|
/* spec = idcode:file */
|
|
struct sandbox_spi_flash *sbsf;
|
|
const char *file;
|
|
size_t len, idname_len;
|
|
const struct spi_flash_params *data;
|
|
|
|
file = strchr(spec, ':');
|
|
if (!file) {
|
|
printf("sandbox_sf: unable to parse file\n");
|
|
goto error;
|
|
}
|
|
idname_len = file - spec;
|
|
++file;
|
|
|
|
for (data = spi_flash_params_table; data->name; data++) {
|
|
len = strlen(data->name);
|
|
if (idname_len != len)
|
|
continue;
|
|
if (!memcmp(spec, data->name, len))
|
|
break;
|
|
}
|
|
if (!data->name) {
|
|
printf("sandbox_sf: unknown flash '%*s'\n", (int)idname_len,
|
|
spec);
|
|
goto error;
|
|
}
|
|
|
|
if (sandbox_sf_0xff[0] == 0x00)
|
|
memset(sandbox_sf_0xff, 0xff, sizeof(sandbox_sf_0xff));
|
|
|
|
sbsf = calloc(sizeof(*sbsf), 1);
|
|
if (!sbsf) {
|
|
printf("sandbox_sf: out of memory\n");
|
|
goto error;
|
|
}
|
|
|
|
sbsf->fd = os_open(file, 02);
|
|
if (sbsf->fd == -1) {
|
|
free(sbsf);
|
|
printf("sandbox_sf: unable to open file '%s'\n", file);
|
|
goto error;
|
|
}
|
|
|
|
sbsf->data = data;
|
|
|
|
*priv = sbsf;
|
|
return 0;
|
|
|
|
error:
|
|
return 1;
|
|
}
|
|
|
|
static void sandbox_sf_free(void *priv)
|
|
{
|
|
struct sandbox_spi_flash *sbsf = priv;
|
|
|
|
os_close(sbsf->fd);
|
|
free(sbsf);
|
|
}
|
|
|
|
static void sandbox_sf_cs_activate(void *priv)
|
|
{
|
|
struct sandbox_spi_flash *sbsf = priv;
|
|
|
|
debug("sandbox_sf: CS activated; state is fresh!\n");
|
|
|
|
/* CS is asserted, so reset state */
|
|
sbsf->off = 0;
|
|
sbsf->addr_bytes = 0;
|
|
sbsf->pad_addr_bytes = 0;
|
|
sbsf->state = SF_CMD;
|
|
sbsf->cmd = SF_CMD;
|
|
}
|
|
|
|
static void sandbox_sf_cs_deactivate(void *priv)
|
|
{
|
|
debug("sandbox_sf: CS deactivated; cmd done processing!\n");
|
|
}
|
|
|
|
/* Figure out what command this stream is telling us to do */
|
|
static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx,
|
|
u8 *tx)
|
|
{
|
|
enum sandbox_sf_state oldstate = sbsf->state;
|
|
|
|
/* We need to output a byte for the cmd byte we just ate */
|
|
sandbox_spi_tristate(tx, 1);
|
|
|
|
sbsf->cmd = rx[0];
|
|
switch (sbsf->cmd) {
|
|
case CMD_READ_ID:
|
|
sbsf->state = SF_ID;
|
|
sbsf->cmd = SF_ID;
|
|
break;
|
|
case CMD_READ_ARRAY_FAST:
|
|
sbsf->pad_addr_bytes = 1;
|
|
case CMD_READ_ARRAY_SLOW:
|
|
case CMD_PAGE_PROGRAM:
|
|
sbsf->state = SF_ADDR;
|
|
break;
|
|
case CMD_WRITE_DISABLE:
|
|
debug(" write disabled\n");
|
|
sbsf->status &= ~STAT_WEL;
|
|
break;
|
|
case CMD_READ_STATUS:
|
|
sbsf->state = SF_READ_STATUS;
|
|
break;
|
|
case CMD_READ_STATUS1:
|
|
sbsf->state = SF_READ_STATUS1;
|
|
break;
|
|
case CMD_WRITE_ENABLE:
|
|
debug(" write enabled\n");
|
|
sbsf->status |= STAT_WEL;
|
|
break;
|
|
default: {
|
|
int flags = sbsf->data->flags;
|
|
|
|
/* we only support erase here */
|
|
if (sbsf->cmd == CMD_ERASE_CHIP) {
|
|
sbsf->erase_size = sbsf->data->sector_size *
|
|
sbsf->data->nr_sectors;
|
|
} else if (sbsf->cmd == CMD_ERASE_4K && (flags & SECT_4K)) {
|
|
sbsf->erase_size = 4 << 10;
|
|
} else if (sbsf->cmd == CMD_ERASE_32K && (flags & SECT_32K)) {
|
|
sbsf->erase_size = 32 << 10;
|
|
} else if (sbsf->cmd == CMD_ERASE_64K &&
|
|
!(flags & (SECT_4K | SECT_32K))) {
|
|
sbsf->erase_size = 64 << 10;
|
|
} else {
|
|
debug(" cmd unknown: %#x\n", sbsf->cmd);
|
|
return 1;
|
|
}
|
|
sbsf->state = SF_ADDR;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (oldstate != sbsf->state)
|
|
debug(" cmd: transition to %s state\n",
|
|
sandbox_sf_state_name(sbsf->state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sandbox_erase_part(struct sandbox_spi_flash *sbsf, int size)
|
|
{
|
|
int todo;
|
|
int ret;
|
|
|
|
while (size > 0) {
|
|
todo = min(size, sizeof(sandbox_sf_0xff));
|
|
ret = os_write(sbsf->fd, sandbox_sf_0xff, todo);
|
|
if (ret != todo)
|
|
return ret;
|
|
size -= todo;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx,
|
|
uint bytes)
|
|
{
|
|
struct sandbox_spi_flash *sbsf = priv;
|
|
uint cnt, pos = 0;
|
|
int ret;
|
|
|
|
debug("sandbox_sf: state:%x(%s) bytes:%u\n", sbsf->state,
|
|
sandbox_sf_state_name(sbsf->state), bytes);
|
|
|
|
if (sbsf->state == SF_CMD) {
|
|
/* Figure out the initial state */
|
|
if (sandbox_sf_process_cmd(sbsf, rx, tx))
|
|
return 1;
|
|
++pos;
|
|
}
|
|
|
|
/* Process the remaining data */
|
|
while (pos < bytes) {
|
|
switch (sbsf->state) {
|
|
case SF_ID: {
|
|
u8 id;
|
|
|
|
debug(" id: off:%u tx:", sbsf->off);
|
|
if (sbsf->off < IDCODE_LEN) {
|
|
/* Extract correct byte from ID 0x00aabbcc */
|
|
id = sbsf->data->jedec >>
|
|
(8 * (IDCODE_LEN - 1 - sbsf->off));
|
|
} else {
|
|
id = 0;
|
|
}
|
|
debug("%d %02x\n", sbsf->off, id);
|
|
tx[pos++] = id;
|
|
++sbsf->off;
|
|
break;
|
|
}
|
|
case SF_ADDR:
|
|
debug(" addr: bytes:%u rx:%02x ", sbsf->addr_bytes,
|
|
rx[pos]);
|
|
|
|
if (sbsf->addr_bytes++ < SF_ADDR_LEN)
|
|
sbsf->off = (sbsf->off << 8) | rx[pos];
|
|
debug("addr:%06x\n", sbsf->off);
|
|
|
|
sandbox_spi_tristate(&tx[pos++], 1);
|
|
|
|
/* See if we're done processing */
|
|
if (sbsf->addr_bytes <
|
|
SF_ADDR_LEN + sbsf->pad_addr_bytes)
|
|
break;
|
|
|
|
/* Next state! */
|
|
if (os_lseek(sbsf->fd, sbsf->off, OS_SEEK_SET) < 0) {
|
|
puts("sandbox_sf: os_lseek() failed");
|
|
return 1;
|
|
}
|
|
switch (sbsf->cmd) {
|
|
case CMD_READ_ARRAY_FAST:
|
|
case CMD_READ_ARRAY_SLOW:
|
|
sbsf->state = SF_READ;
|
|
break;
|
|
case CMD_PAGE_PROGRAM:
|
|
sbsf->state = SF_WRITE;
|
|
break;
|
|
default:
|
|
/* assume erase state ... */
|
|
sbsf->state = SF_ERASE;
|
|
goto case_sf_erase;
|
|
}
|
|
debug(" cmd: transition to %s state\n",
|
|
sandbox_sf_state_name(sbsf->state));
|
|
break;
|
|
case SF_READ:
|
|
/*
|
|
* XXX: need to handle exotic behavior:
|
|
* - reading past end of device
|
|
*/
|
|
|
|
cnt = bytes - pos;
|
|
debug(" tx: read(%u)\n", cnt);
|
|
ret = os_read(sbsf->fd, tx + pos, cnt);
|
|
if (ret < 0) {
|
|
puts("sandbox_spi: os_read() failed\n");
|
|
return 1;
|
|
}
|
|
pos += ret;
|
|
break;
|
|
case SF_READ_STATUS:
|
|
debug(" read status: %#x\n", sbsf->status);
|
|
cnt = bytes - pos;
|
|
memset(tx + pos, sbsf->status, cnt);
|
|
pos += cnt;
|
|
break;
|
|
case SF_READ_STATUS1:
|
|
debug(" read status: %#x\n", sbsf->status);
|
|
cnt = bytes - pos;
|
|
memset(tx + pos, sbsf->status >> 8, cnt);
|
|
pos += cnt;
|
|
break;
|
|
case SF_WRITE:
|
|
/*
|
|
* XXX: need to handle exotic behavior:
|
|
* - unaligned addresses
|
|
* - more than a page (256) worth of data
|
|
* - reading past end of device
|
|
*/
|
|
if (!(sbsf->status & STAT_WEL)) {
|
|
puts("sandbox_sf: write enable not set before write\n");
|
|
goto done;
|
|
}
|
|
|
|
cnt = bytes - pos;
|
|
debug(" rx: write(%u)\n", cnt);
|
|
sandbox_spi_tristate(&tx[pos], cnt);
|
|
ret = os_write(sbsf->fd, rx + pos, cnt);
|
|
if (ret < 0) {
|
|
puts("sandbox_spi: os_write() failed\n");
|
|
return 1;
|
|
}
|
|
pos += ret;
|
|
sbsf->status &= ~STAT_WEL;
|
|
break;
|
|
case SF_ERASE:
|
|
case_sf_erase: {
|
|
if (!(sbsf->status & STAT_WEL)) {
|
|
puts("sandbox_sf: write enable not set before erase\n");
|
|
goto done;
|
|
}
|
|
|
|
/* verify address is aligned */
|
|
if (sbsf->off & (sbsf->erase_size - 1)) {
|
|
debug(" sector erase: cmd:%#x needs align:%#x, but we got %#x\n",
|
|
sbsf->cmd, sbsf->erase_size,
|
|
sbsf->off);
|
|
sbsf->status &= ~STAT_WEL;
|
|
goto done;
|
|
}
|
|
|
|
debug(" sector erase addr: %u, size: %u\n", sbsf->off,
|
|
sbsf->erase_size);
|
|
|
|
cnt = bytes - pos;
|
|
sandbox_spi_tristate(&tx[pos], cnt);
|
|
pos += cnt;
|
|
|
|
/*
|
|
* TODO(vapier@gentoo.org): latch WIP in status, and
|
|
* delay before clearing it ?
|
|
*/
|
|
ret = sandbox_erase_part(sbsf, sbsf->erase_size);
|
|
sbsf->status &= ~STAT_WEL;
|
|
if (ret) {
|
|
debug("sandbox_sf: Erase failed\n");
|
|
goto done;
|
|
}
|
|
goto done;
|
|
}
|
|
default:
|
|
debug(" ??? no idea what to do ???\n");
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
done:
|
|
return pos == bytes ? 0 : 1;
|
|
}
|
|
|
|
static const struct sandbox_spi_emu_ops sandbox_sf_ops = {
|
|
.setup = sandbox_sf_setup,
|
|
.free = sandbox_sf_free,
|
|
.cs_activate = sandbox_sf_cs_activate,
|
|
.cs_deactivate = sandbox_sf_cs_deactivate,
|
|
.xfer = sandbox_sf_xfer,
|
|
};
|
|
|
|
static int sandbox_cmdline_cb_spi_sf(struct sandbox_state *state,
|
|
const char *arg)
|
|
{
|
|
unsigned long bus, cs;
|
|
const char *spec = sandbox_spi_parse_spec(arg, &bus, &cs);
|
|
|
|
if (!spec)
|
|
return 1;
|
|
|
|
/*
|
|
* It is safe to not make a copy of 'spec' because it comes from the
|
|
* command line.
|
|
*
|
|
* TODO(sjg@chromium.org): It would be nice if we could parse the
|
|
* spec here, but the problem is that no U-Boot init has been done
|
|
* yet. Perhaps we can figure something out.
|
|
*/
|
|
state->spi[bus][cs].ops = &sandbox_sf_ops;
|
|
state->spi[bus][cs].spec = spec;
|
|
return 0;
|
|
}
|
|
SANDBOX_CMDLINE_OPT(spi_sf, 1, "connect a SPI flash: <bus>:<cs>:<id>:<file>");
|