u-boot/board/freescale/mx35pdk/mx35pdk.h
Stefano Babic eae4988b45 Add support for Freescale's mx35pdk board.
The patch adds suupport for the Freescale's mx35pdk board
(known as well as mx35_3stack).

The board boots from the NOR flash. Following devices
are supported:
 - two ethernet devices (FEC and SMC911x on debug board)
 - I2C
 - PMIC (MC13892) via I2C interface
 - UART
 - NOR flash (64MB)
 - NAND flash (2GB)
 - basic access to mc9sdz60 registers via I2C interface

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-02-02 00:54:43 +01:00

101 lines
3.4 KiB
C

/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __BOARD_MX35_3STACK_H
#define __BOARD_MX35_3STACK_H
#define AIPS_MPR_CONFIG 0x77777777
#define AIPS_OPACR_CONFIG 0x00000000
/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
#define MAX_MPR_CONFIG 0x00302154
/* SGPCR - always park on last master */
#define MAX_SGPCR_CONFIG 0x00000010
/* MGPCR - restore default values */
#define MAX_MGPCR_CONFIG 0x00000000
/*
* M3IF Control Register (M3IFCTL)
* MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
* MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
* MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
* MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
* MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
* MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
* MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
* MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
* ------------
* 0x00000040
*/
#define M3IF_CONFIG 0x00000040
#define DBG_BASE_ADDR WEIM_CTRL_CS5
#define DBG_CSCR_U_CONFIG 0x0000D843
#define DBG_CSCR_L_CONFIG 0x22252521
#define DBG_CSCR_A_CONFIG 0x22220A00
#define CCM_CCMR_CONFIG 0x003F4208
#define CCM_PDR0_CONFIG 0x00801000
#define PLL_BRM_OFFSET 31
#define PLL_PD_OFFSET 26
#define PLL_MFD_OFFSET 16
#define PLL_MFI_OFFSET 10
#define _PLL_BRM(x) ((x) << PLL_BRM_OFFSET)
#define _PLL_PD(x) (((x) - 1) << PLL_PD_OFFSET)
#define _PLL_MFD(x) (((x) - 1) << PLL_MFD_OFFSET)
#define _PLL_MFI(x) ((x) << PLL_MFI_OFFSET)
#define _PLL_MFN(x) (x)
#define _PLL_SETTING(brm, pd, mfd, mfi, mfn) \
(_PLL_BRM(brm) | _PLL_PD(pd) | _PLL_MFD(mfd) | _PLL_MFI(mfi) |\
_PLL_MFN(mfn))
#define CCM_MPLL_532_HZ _PLL_SETTING(1, 1, 12, 11, 1)
#define CCM_MPLL_399_HZ _PLL_SETTING(0, 1, 16, 8, 5)
#define CCM_PPLL_300_HZ _PLL_SETTING(0, 1, 4, 6, 1)
/* MEMORY SETTING */
#define ESDCTL_0x92220000 0x92220000
#define ESDCTL_0xA2220000 0xA2220000
#define ESDCTL_0xB2220000 0xB2220000
#define ESDCTL_0x82228080 0x82228080
#define ESDCTL_PRECHARGE 0x00000400
#define ESDCTL_MDDR_CONFIG 0x007FFC3F
#define ESDCTL_MDDR_MR 0x00000033
#define ESDCTL_MDDR_EMR 0x02000000
#define ESDCTL_DDR2_CONFIG 0x007FFC3F
#define ESDCTL_DDR2_EMR2 0x04000000
#define ESDCTL_DDR2_EMR3 0x06000000
#define ESDCTL_DDR2_EN_DLL 0x02000400
#define ESDCTL_DDR2_RESET_DLL 0x00000333
#define ESDCTL_DDR2_MR 0x00000233
#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780
#define ESDCTL_DELAY_LINE5 0x00F49F00
#endif /* __BOARD_MX35_3STACK_H */