u-boot/board/olimex/mx23_olinuxino/mx23_olinuxino.c
Jan Luebbe 7ae350a030 arm: mxs: olinuxino: move DRAM config tuning to SPL
The weak mxs_adjust_memory_params function is called from spl_mem_init.c,
so it must be linked into the SPL to have an effect. Move it from
mx23_olinuxino.c to spl_boot.c.

This change was verified by reading back the register values.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2014-12-19 15:32:14 +01:00

80 lines
1.4 KiB
C

/*
* Olimex MX23 Olinuxino board
*
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/iomux-mx23.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
* Functions
*/
int board_early_init_f(void)
{
/* IO0 clock at 480MHz */
mxs_set_ioclk(MXC_IOCLK0, 480000);
/* SSP0 clock at 96MHz */
mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
return 0;
}
#ifdef CONFIG_CMD_USB
int board_ehci_hcd_init(int port)
{
/* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */
gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1);
udelay(100);
return 0;
}
int board_ehci_hcd_exit(int port)
{
/* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */
gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 0);
return 0;
}
#endif
int dram_init(void)
{
return mxs_dram_init();
}
#ifdef CONFIG_CMD_MMC
static int mx23_olx_mmc_cd(int id)
{
return 1; /* Card always present */
}
int board_mmc_init(bd_t *bis)
{
return mxsmmc_initialize(bis, 0, NULL, mx23_olx_mmc_cd);
}
#endif
int board_init(void)
{
/* Adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set(STATUS_LED_BOOT, STATUS_LED_STATE);
#endif
return 0;
}