mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
22b618346a
As the comment says now that we have SPL support this is no longer necessary, as PLL6 is already setup with the exact same parameters by the SPL. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
193 lines
4.9 KiB
C
193 lines
4.9 KiB
C
/*
|
|
* sun6i specific clock code
|
|
*
|
|
* (C) Copyright 2007-2012
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Tom Cubie <tangliang@allwinnertech.com>
|
|
*
|
|
* (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/prcm.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void clock_init_safe(void)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
struct sunxi_prcm_reg * const prcm =
|
|
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
|
|
|
|
/* Set PLL ldo voltage without this PLL6 does not work properly */
|
|
clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
|
|
PRCM_PLL_CTRL_LDO_KEY);
|
|
clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
|
|
PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
|
|
PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
|
|
clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
|
|
|
|
clock_set_pll1(408000000);
|
|
|
|
writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
|
|
|
|
writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
|
|
|
|
writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg);
|
|
writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg);
|
|
}
|
|
#endif
|
|
|
|
void clock_init_uart(void)
|
|
{
|
|
#if CONFIG_CONS_INDEX < 5
|
|
struct sunxi_ccm_reg *const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
/* uart clock source is apb2 */
|
|
writel(APB2_CLK_SRC_OSC24M|
|
|
APB2_CLK_RATE_N_1|
|
|
APB2_CLK_RATE_M(1),
|
|
&ccm->apb2_div);
|
|
|
|
/* open the clock for uart */
|
|
setbits_le32(&ccm->apb2_gate,
|
|
CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
|
|
CONFIG_CONS_INDEX - 1));
|
|
|
|
/* deassert uart reset */
|
|
setbits_le32(&ccm->apb2_reset_cfg,
|
|
1 << (APB2_RESET_UART_SHIFT +
|
|
CONFIG_CONS_INDEX - 1));
|
|
#else
|
|
/* enable R_PIO and R_UART clocks, and de-assert resets */
|
|
prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
|
|
#endif
|
|
}
|
|
|
|
int clock_twi_onoff(int port, int state)
|
|
{
|
|
struct sunxi_ccm_reg *const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
if (port > 3)
|
|
return -1;
|
|
|
|
/* set the apb clock gate for twi */
|
|
if (state)
|
|
setbits_le32(&ccm->apb2_gate,
|
|
CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
|
|
else
|
|
clrbits_le32(&ccm->apb2_gate,
|
|
CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void clock_set_pll1(unsigned int clk)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
const int p = 0;
|
|
int k = 1;
|
|
int m = 1;
|
|
|
|
if (clk > 1152000000) {
|
|
k = 2;
|
|
} else if (clk > 768000000) {
|
|
k = 3;
|
|
m = 2;
|
|
}
|
|
|
|
/* Switch to 24MHz clock while changing PLL1 */
|
|
writel(AXI_DIV_3 << AXI_DIV_SHIFT |
|
|
ATB_DIV_2 << ATB_DIV_SHIFT |
|
|
CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
|
|
&ccm->cpu_axi_cfg);
|
|
|
|
/*
|
|
* sun6i: PLL1 rate = ((24000000 * n * k) >> 0) / m (p is ignored)
|
|
* sun8i: PLL1 rate = ((24000000 * n * k) >> p) / m
|
|
*/
|
|
writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
|
|
CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) |
|
|
CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg);
|
|
sdelay(200);
|
|
|
|
/* Switch CPU to PLL1 */
|
|
writel(AXI_DIV_3 << AXI_DIV_SHIFT |
|
|
ATB_DIV_2 << ATB_DIV_SHIFT |
|
|
CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
|
|
&ccm->cpu_axi_cfg);
|
|
}
|
|
#endif
|
|
|
|
void clock_set_pll3(unsigned int clk)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
const int m = 8; /* 3 MHz steps just like sun4i, sun5i and sun7i */
|
|
|
|
if (clk == 0) {
|
|
clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
|
|
return;
|
|
}
|
|
|
|
/* PLL3 rate = 24000000 * n / m */
|
|
writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
|
|
CCM_PLL3_CTRL_N(clk / (24000000 / m)) | CCM_PLL3_CTRL_M(m),
|
|
&ccm->pll3_cfg);
|
|
}
|
|
|
|
void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
const int max_n = 32;
|
|
int k = 1, m = 2;
|
|
|
|
if (sigma_delta_enable)
|
|
writel(CCM_PLL5_PATTERN, &ccm->pll5_pattern_cfg);
|
|
|
|
/* PLL5 rate = 24000000 * n * k / m */
|
|
if (clk > 24000000 * k * max_n / m) {
|
|
m = 1;
|
|
if (clk > 24000000 * k * max_n / m)
|
|
k = 2;
|
|
}
|
|
writel(CCM_PLL5_CTRL_EN |
|
|
(sigma_delta_enable ? CCM_PLL5_CTRL_SIGMA_DELTA_EN : 0) |
|
|
CCM_PLL5_CTRL_UPD |
|
|
CCM_PLL5_CTRL_N(clk / (24000000 * k / m)) |
|
|
CCM_PLL5_CTRL_K(k) | CCM_PLL5_CTRL_M(m), &ccm->pll5_cfg);
|
|
|
|
udelay(5500);
|
|
}
|
|
|
|
unsigned int clock_get_pll6(void)
|
|
{
|
|
struct sunxi_ccm_reg *const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
uint32_t rval = readl(&ccm->pll6_cfg);
|
|
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
|
|
int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
|
|
return 24000000 * n * k / 2;
|
|
}
|
|
|
|
void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
|
|
{
|
|
int pll = clock_get_pll6() * 2;
|
|
int div = 1;
|
|
|
|
while ((pll / div) > hz)
|
|
div++;
|
|
|
|
writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_PLL6_2X | CCM_DE_CTRL_M(div),
|
|
clk_cfg);
|
|
}
|