u-boot/drivers/mtd/nand/omap_elm.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

193 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010-2011 Texas Instruments, <www.ti.com>
* Mansoor Ahamed <mansoor.ahamed@ti.com>
*
* BCH Error Location Module (ELM) support.
*
* NOTE:
* 1. Supports only continuous mode. Dont see need for page mode in uboot
* 2. Supports only syndrome polynomial 0. i.e. poly local variable is
* always set to ELM_DEFAULT_POLY. Dont see need for other polynomial
* sets in uboot
*/
#include <common.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/mtd/omap_elm.h>
#include <asm/arch/hardware.h>
#define DRIVER_NAME "omap-elm"
#define ELM_DEFAULT_POLY (0)
struct elm *elm_cfg;
/**
* elm_load_syndromes - Load BCH syndromes based on bch_type selection
* @syndrome: BCH syndrome
* @bch_type: BCH4/BCH8/BCH16
* @poly: Syndrome Polynomial set to use
*/
static void elm_load_syndromes(u8 *syndrome, enum bch_level bch_type, u8 poly)
{
u32 *ptr;
u32 val;
/* reg 0 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0];
val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) |
(syndrome[3] << 24);
writel(val, ptr);
/* reg 1 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1];
val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) |
(syndrome[7] << 24);
writel(val, ptr);
if (bch_type == BCH_8_BIT || bch_type == BCH_16_BIT) {
/* reg 2 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
(syndrome[11] << 24);
writel(val, ptr);
/* reg 3 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3];
val = syndrome[12] | (syndrome[13] << 8) |
(syndrome[14] << 16) | (syndrome[15] << 24);
writel(val, ptr);
}
if (bch_type == BCH_16_BIT) {
/* reg 4 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
val = syndrome[16] | (syndrome[17] << 8) |
(syndrome[18] << 16) | (syndrome[19] << 24);
writel(val, ptr);
/* reg 5 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5];
val = syndrome[20] | (syndrome[21] << 8) |
(syndrome[22] << 16) | (syndrome[23] << 24);
writel(val, ptr);
/* reg 6 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6];
val = syndrome[24] | (syndrome[25] << 8) |
(syndrome[26] << 16) | (syndrome[27] << 24);
writel(val, ptr);
}
}
/**
* elm_check_errors - Check for BCH errors and return error locations
* @syndrome: BCH syndrome
* @bch_type: BCH4/BCH8/BCH16
* @error_count: Returns number of errrors in the syndrome
* @error_locations: Returns error locations (in decimal) in this array
*
* Check the provided syndrome for BCH errors and return error count
* and locations in the array passed. Returns -1 if error is not correctable,
* else returns 0
*/
int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count,
u32 *error_locations)
{
u8 poly = ELM_DEFAULT_POLY;
s8 i;
u32 location_status;
elm_load_syndromes(syndrome, bch_type, poly);
/* start processing */
writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
| ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID),
&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]);
/* wait for processing to complete */
while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1)
;
/* clear status */
writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)),
&elm_cfg->irqstatus);
/* check if correctable */
location_status = readl(&elm_cfg->error_location[poly].location_status);
if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) {
printf("%s: uncorrectable ECC errors\n", DRIVER_NAME);
return -EBADMSG;
}
/* get error count */
*error_count = readl(&elm_cfg->error_location[poly].location_status) &
ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK;
for (i = 0; i < *error_count; i++) {
error_locations[i] =
readl(&elm_cfg->error_location[poly].error_location_x[i]);
}
return 0;
}
/**
* elm_config - Configure ELM module
* @level: 4 / 8 / 16 bit BCH
*
* Configure ELM module based on BCH level.
* Set mode as continuous mode.
* Currently we are using only syndrome 0 and syndromes 1 to 6 are not used.
* Also, the mode is set only for syndrome 0
*/
int elm_config(enum bch_level level)
{
u32 val;
u8 poly = ELM_DEFAULT_POLY;
u32 buffer_size = 0x7FF;
/* config size and level */
val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK;
val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) &
ELM_LOCATION_CONFIG_ECC_SIZE_MASK);
writel(val, &elm_cfg->location_config);
/* config continous mode */
/* enable interrupt generation for syndrome polynomial set */
writel((readl(&elm_cfg->irqenable) | (0x1 << poly)),
&elm_cfg->irqenable);
/* set continuous mode for the syndrome polynomial set */
writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)),
&elm_cfg->page_ctrl);
return 0;
}
/**
* elm_reset - Do a soft reset of ELM
*
* Perform a soft reset of ELM and return after reset is done.
*/
void elm_reset(void)
{
/* initiate reset */
writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
&elm_cfg->sysconfig);
/* wait for reset complete and normal operation */
while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=
ELM_SYSSTATUS_RESETDONE)
;
}
/**
* elm_init - Initialize ELM module
*
* Initialize ELM support. Currently it does only base address init
* and ELM reset.
*/
void elm_init(void)
{
elm_cfg = (struct elm *)ELM_BASE;
elm_reset();
}