u-boot/drivers/mtd/nand/Makefile
Jörg Krause 15e207faa0 spl, nand: add option CONFIG_SPL_NAND_IDENT to lookup for supported NAND chips
Add the config option `CONFIG_SPL_NAND_IDENT` for using the NAND chip ID list
to identify the NAND flash in SPL.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
2018-06-27 12:20:55 +02:00

77 lines
2.2 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_NAND_DRIVERS
NORMAL_DRIVERS=y
endif
obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
obj-$(CONFIG_SPL_NAND_INIT) += nand.o
ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
endif
else # not spl
NORMAL_DRIVERS=y
obj-y += nand.o
obj-y += nand_bbt.o
obj-y += nand_ids.o
obj-y += nand_util.o
obj-y += nand_ecc.o
obj-y += nand_base.o
obj-y += nand_timings.o
endif # not spl
ifdef NORMAL_DRIVERS
obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o
obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o
obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o
obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
obj-$(CONFIG_NAND_DENALI) += denali.o
obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o
obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_NAND_MXS) += mxs_nand.o
obj-$(CONFIG_NAND_MXS_DT) += mxs_nand_dt.o
obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
obj-$(CONFIG_NAND_PLAT) += nand_plat.o
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o
obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o
else # minimal SPL drivers
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o
endif # drivers