Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-26 21:13:48 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-imx/mx7/ddr.c
Marek Vasut af50d92ae7 ARM: imx: ddr: Add deskew register programming 
Fill is code for programming the DDR_PHY_CMD_DESKEW_CONx registers,
which are optional, but can be used to fill in the byte lane delays.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-08-17 17:55:49 +02:00

230 lines
8.4 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* DDR controller configuration for the i.MX7 architecture
*
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*/
#include <linux/types.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/mx7-ddr.h>
#include <common.h>
#include <linux/delay.h>
/*
* Routine: mx7_dram_cfg
* Description: DDR controller configuration
*
* @ddrc_regs_val: DDRC registers value
* @ddrc_mp_val: DDRC_MP registers value
* @ddr_phy_regs_val: DDR_PHY registers value
* @calib_param: calibration parameters
*
*/
void mx7_dram_cfg(struct ddrc *ddrc_regs_val, struct ddrc_mp *ddrc_mp_val,
struct ddr_phy *ddr_phy_regs_val,
struct mx7_calibration *calib_param)
{
struct src *const src_regs = (struct src *)SRC_BASE_ADDR;
struct ddrc *const ddrc_regs = (struct ddrc *)DDRC_IPS_BASE_ADDR;
struct ddrc_mp *const ddrc_mp_reg = (struct ddrc_mp *)DDRC_MP_BASE_ADDR;
struct ddr_phy *const ddr_phy_regs =
(struct ddr_phy *)DDRPHY_IPS_BASE_ADDR;
struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
int i;
/*
* iMX7D RM 9.2.4.9.3 Power removal flow Table 9-11. Re-enabling power
* row 2 says "Reset controller / PHY by driving core_ddrc_rst = 0 ,
* aresetn_n = 0, presetn = 0. That means reset everything.
*/
writel(SRC_DDRC_RCR_DDRC_CORE_RST_MASK | SRC_DDRC_RCR_DDRC_PRST_MASK,
&src_regs->ddrc_rcr);
/*
* iMX7D RM 6.2.7.26 SRC_DDRC_RCR says wait 30 cycles (of unknown).
* If we assume this is 30 cycles at 100 MHz (about the rate of a
* DRAM bus), that's 300 nS, so waiting 10 uS is more then plenty.
*/
udelay(10);
/* De-assert DDR Controller 'preset' and DDR PHY reset */
clrbits_le32(&src_regs->ddrc_rcr, SRC_DDRC_RCR_DDRC_PRST_MASK);
/* DDR controller configuration */
writel(ddrc_regs_val->mstr, &ddrc_regs->mstr);
writel(ddrc_regs_val->rfshtmg, &ddrc_regs->rfshtmg);
writel(ddrc_mp_val->pctrl_0, &ddrc_mp_reg->pctrl_0);
writel(ddrc_regs_val->init1, &ddrc_regs->init1);
writel(ddrc_regs_val->init0, &ddrc_regs->init0);
writel(ddrc_regs_val->init3, &ddrc_regs->init3);
writel(ddrc_regs_val->init4, &ddrc_regs->init4);
writel(ddrc_regs_val->init5, &ddrc_regs->init5);
writel(ddrc_regs_val->rankctl, &ddrc_regs->rankctl);
writel(ddrc_regs_val->dramtmg0, &ddrc_regs->dramtmg0);
writel(ddrc_regs_val->dramtmg1, &ddrc_regs->dramtmg1);
writel(ddrc_regs_val->dramtmg2, &ddrc_regs->dramtmg2);
writel(ddrc_regs_val->dramtmg3, &ddrc_regs->dramtmg3);
writel(ddrc_regs_val->dramtmg4, &ddrc_regs->dramtmg4);
writel(ddrc_regs_val->dramtmg5, &ddrc_regs->dramtmg5);
writel(ddrc_regs_val->dramtmg8, &ddrc_regs->dramtmg8);
writel(ddrc_regs_val->zqctl0, &ddrc_regs->zqctl0);
writel(ddrc_regs_val->zqctl1, &ddrc_regs->zqctl1);
writel(ddrc_regs_val->dfitmg0, &ddrc_regs->dfitmg0);
writel(ddrc_regs_val->dfitmg1, &ddrc_regs->dfitmg1);
writel(ddrc_regs_val->dfiupd0, &ddrc_regs->dfiupd0);
writel(ddrc_regs_val->dfiupd1, &ddrc_regs->dfiupd1);
writel(ddrc_regs_val->dfiupd2, &ddrc_regs->dfiupd2);
writel(ddrc_regs_val->addrmap0, &ddrc_regs->addrmap0);
writel(ddrc_regs_val->addrmap1, &ddrc_regs->addrmap1);
writel(ddrc_regs_val->addrmap4, &ddrc_regs->addrmap4);
writel(ddrc_regs_val->addrmap5, &ddrc_regs->addrmap5);
writel(ddrc_regs_val->addrmap6, &ddrc_regs->addrmap6);
writel(ddrc_regs_val->odtcfg, &ddrc_regs->odtcfg);
writel(ddrc_regs_val->odtmap, &ddrc_regs->odtmap);
/* De-assert DDR Controller 'core_ddrc_rstn' and 'aresetn' */
clrbits_le32(&src_regs->ddrc_rcr, SRC_DDRC_RCR_DDRC_CORE_RST_MASK);
/* PHY configuration */
writel(ddr_phy_regs_val->phy_con0, &ddr_phy_regs->phy_con0);
writel(ddr_phy_regs_val->phy_con1, &ddr_phy_regs->phy_con1);
writel(ddr_phy_regs_val->phy_con4, &ddr_phy_regs->phy_con4);
writel(ddr_phy_regs_val->mdll_con0, &ddr_phy_regs->mdll_con0);
writel(ddr_phy_regs_val->drvds_con0, &ddr_phy_regs->drvds_con0);
writel(ddr_phy_regs_val->offset_wr_con0, &ddr_phy_regs->offset_wr_con0);
writel(ddr_phy_regs_val->offset_rd_con0, &ddr_phy_regs->offset_rd_con0);
writel(ddr_phy_regs_val->cmd_sdll_con0 |
DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK,
&ddr_phy_regs->cmd_sdll_con0);
writel(ddr_phy_regs_val->cmd_sdll_con0 &
~DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK,
&ddr_phy_regs->cmd_sdll_con0);
writel(ddr_phy_regs_val->offset_lp_con0, &ddr_phy_regs->offset_lp_con0);
writel(ddr_phy_regs_val->cmd_deskew_con0,
&ddr_phy_regs->cmd_deskew_con0);
writel(ddr_phy_regs_val->cmd_deskew_con1,
&ddr_phy_regs->cmd_deskew_con1);
writel(ddr_phy_regs_val->cmd_deskew_con2,
&ddr_phy_regs->cmd_deskew_con2);
writel(ddr_phy_regs_val->cmd_deskew_con3,
&ddr_phy_regs->cmd_deskew_con3);
writel(ddr_phy_regs_val->cmd_lvl_con0, &ddr_phy_regs->cmd_lvl_con0);
/* calibration */
for (i = 0; i < calib_param->num_val; i++)
writel(calib_param->values[i], &ddr_phy_regs->zq_con0);
/* Wake_up DDR PHY */
HW_CCM_CCGR_WR(CCGR_IDX_DDR, CCM_CLK_ON_N_N);
writel(IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up(0xf) |
IOMUXC_GPR_GPR8_ddr_phy_dfi_init_start_MASK,
&iomuxc_gpr_regs->gpr[8]);
HW_CCM_CCGR_WR(CCGR_IDX_DDR, CCM_CLK_ON_R_W);
}
/*
* Routine: imx_ddr_size
* Description: extract the current DRAM size from the DDRC registers
*
* @return: DRAM size
*/
unsigned int imx_ddr_size(void)
{
struct ddrc *const ddrc_regs = (struct ddrc *)DDRC_IPS_BASE_ADDR;
u32 reg_val, field_val;
int bits = 0;/* Number of address bits */
/* Count data bus width bits */
reg_val = readl(&ddrc_regs->mstr);
field_val = (reg_val & MSTR_DATA_BUS_WIDTH_MASK) >> MSTR_DATA_BUS_WIDTH_SHIFT;
bits += 2 - field_val;
/* Count rank address bits */
field_val = (reg_val & MSTR_DATA_ACTIVE_RANKS_MASK) >> MSTR_DATA_ACTIVE_RANKS_SHIFT;
if (field_val > 1)
bits += field_val - 1;
/* Count column address bits */
bits += 2;/* Column address 0 and 1 are fixed mapped */
reg_val = readl(&ddrc_regs->addrmap2);
field_val = (reg_val & ADDRMAP2_COL_B2_MASK) >> ADDRMAP2_COL_B2_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP2_COL_B3_MASK) >> ADDRMAP2_COL_B3_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP2_COL_B4_MASK) >> ADDRMAP2_COL_B4_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP2_COL_B5_MASK) >> ADDRMAP2_COL_B5_SHIFT;
if (field_val <= 7)
bits++;
reg_val = readl(&ddrc_regs->addrmap3);
field_val = (reg_val & ADDRMAP3_COL_B6_MASK) >> ADDRMAP3_COL_B6_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP3_COL_B7_MASK) >> ADDRMAP3_COL_B7_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP3_COL_B8_MASK) >> ADDRMAP3_COL_B8_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP3_COL_B9_MASK) >> ADDRMAP3_COL_B9_SHIFT;
if (field_val <= 7)
bits++;
reg_val = readl(&ddrc_regs->addrmap4);
field_val = (reg_val & ADDRMAP4_COL_B10_MASK) >> ADDRMAP4_COL_B10_SHIFT;
if (field_val <= 7)
bits++;
field_val = (reg_val & ADDRMAP4_COL_B11_MASK) >> ADDRMAP4_COL_B11_SHIFT;
if (field_val <= 7)
bits++;
/* Count row address bits */
reg_val = readl(&ddrc_regs->addrmap5);
field_val = (reg_val & ADDRMAP5_ROW_B0_MASK) >> ADDRMAP5_ROW_B0_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP5_ROW_B1_MASK) >> ADDRMAP5_ROW_B1_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP5_ROW_B2_10_MASK) >> ADDRMAP5_ROW_B2_10_SHIFT;
if (field_val <= 11)
bits += 9;
field_val = (reg_val & ADDRMAP5_ROW_B11_MASK) >> ADDRMAP5_ROW_B11_SHIFT;
if (field_val <= 11)
bits++;
reg_val = readl(&ddrc_regs->addrmap6);
field_val = (reg_val & ADDRMAP6_ROW_B12_MASK) >> ADDRMAP6_ROW_B12_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP6_ROW_B13_MASK) >> ADDRMAP6_ROW_B13_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP6_ROW_B14_MASK) >> ADDRMAP6_ROW_B14_SHIFT;
if (field_val <= 11)
bits++;
field_val = (reg_val & ADDRMAP6_ROW_B15_MASK) >> ADDRMAP6_ROW_B15_SHIFT;
if (field_val <= 11)
bits++;
/* Count bank bits */
reg_val = readl(&ddrc_regs->addrmap1);
field_val = (reg_val & ADDRMAP1_BANK_B0_MASK) >> ADDRMAP1_BANK_B0_SHIFT;
if (field_val <= 30)
bits++;
field_val = (reg_val & ADDRMAP1_BANK_B1_MASK) >> ADDRMAP1_BANK_B1_SHIFT;
if (field_val <= 30)
bits++;
field_val = (reg_val & ADDRMAP1_BANK_B2_MASK) >> ADDRMAP1_BANK_B2_SHIFT;
if (field_val <= 29)
bits++;
/* cap to max 2 GB */
if (bits > 31)
bits = 31;
return 1 << bits;
}
Reference in a new issue View git blame Copy permalink