mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
f2940f3e80
Update PLL3/PLL4 PFD and USDHC clocks to meet maximum frequency restrictions. Detail clock rate changes in the patch: PLL3 PFD2: 389M -> 324M PLL3 PFD3: 336M -> 389M PLL3 PFD3: DIV1 336M -> 389M (OD), 194M (ND/LD) PLL3 PFD3: DIV2 336M -> 194M (OD), 97M (ND/LD) PLL4 PFD0: 792M -> 594M PLL4 PFD2: 792M -> 316.8M NIC_AP: 96M (ND) -> 192M, 48M (LD) -> 96M NIC_LPAV: 198 (ND) -> 192M, 99M (LD) -> 96M USDHC0: PLL3 PFD3 DIV1, 389M (OD), 194M (ND/LD) USDHC1: PLL3 PFD3 DIV2, 194M (OD), 97M (ND/LD) USDHC2: PLL3 PFD3 DIV2, 194M (OD), 97M (ND/LD) Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
738 lines
17 KiB
C
738 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2021 NXP
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <div64.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/cgc.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/delay.h>
|
|
#include <hang.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct cgc1_regs *cgc1_regs = (struct cgc1_regs *)0x292C0000UL;
|
|
static struct cgc2_regs *cgc2_regs = (struct cgc2_regs *)0x2da60000UL;
|
|
|
|
void cgc1_soscdiv_init(void)
|
|
{
|
|
/* Configure SOSC/FRO DIV1 ~ DIV3 */
|
|
clrbits_le32(&cgc1_regs->soscdiv, BIT(7));
|
|
clrbits_le32(&cgc1_regs->soscdiv, BIT(15));
|
|
clrbits_le32(&cgc1_regs->soscdiv, BIT(23));
|
|
clrbits_le32(&cgc1_regs->soscdiv, BIT(31));
|
|
|
|
clrbits_le32(&cgc1_regs->frodiv, BIT(7));
|
|
}
|
|
|
|
void cgc1_pll2_init(ulong freq)
|
|
{
|
|
u32 reg;
|
|
|
|
if (readl(&cgc1_regs->pll2csr) & BIT(23))
|
|
clrbits_le32(&cgc1_regs->pll2csr, BIT(23));
|
|
|
|
/* Disable PLL2 */
|
|
clrbits_le32(&cgc1_regs->pll2csr, BIT(0));
|
|
mdelay(1);
|
|
|
|
/* wait valid bit false */
|
|
while ((readl(&cgc1_regs->pll2csr) & BIT(24)))
|
|
;
|
|
|
|
/* Select SOSC as source */
|
|
reg = (freq / MHZ(24)) << 16;
|
|
writel(reg, &cgc1_regs->pll2cfg);
|
|
|
|
/* Enable PLL2 */
|
|
setbits_le32(&cgc1_regs->pll2csr, BIT(0));
|
|
|
|
/* Wait for PLL2 clock ready */
|
|
while (!(readl(&cgc1_regs->pll2csr) & BIT(24)))
|
|
;
|
|
}
|
|
|
|
static void cgc1_set_a35_clk(u32 clk_src, u32 div_core)
|
|
{
|
|
u32 reg;
|
|
|
|
/* ulock */
|
|
if (readl(&cgc1_regs->ca35clk) & BIT(31))
|
|
clrbits_le32(&cgc1_regs->ca35clk, BIT(31));
|
|
|
|
reg = readl(&cgc1_regs->ca35clk);
|
|
reg &= ~GENMASK(29, 21);
|
|
reg |= ((clk_src & 0x3) << 28);
|
|
reg |= (((div_core - 1) & 0x3f) << 21);
|
|
writel(reg, &cgc1_regs->ca35clk);
|
|
|
|
while (!(readl(&cgc1_regs->ca35clk) & BIT(27)))
|
|
;
|
|
}
|
|
|
|
void cgc1_init_core_clk(ulong freq)
|
|
{
|
|
u32 reg = readl(&cgc1_regs->ca35clk);
|
|
|
|
/* if already selected to PLL2, switch to FRO firstly */
|
|
if (((reg >> 28) & 0x3) == 0x1)
|
|
cgc1_set_a35_clk(0, 1);
|
|
|
|
cgc1_pll2_init(freq);
|
|
|
|
/* Set A35 clock to pll2 */
|
|
cgc1_set_a35_clk(1, 1);
|
|
}
|
|
|
|
void cgc1_enet_stamp_sel(u32 clk_src)
|
|
{
|
|
writel((clk_src & 0x7) << 24, &cgc1_regs->enetstamp);
|
|
}
|
|
|
|
void cgc1_pll3_init(ulong freq)
|
|
{
|
|
/* Gate off VCO */
|
|
setbits_le32(&cgc1_regs->pll3div_vco, BIT(7));
|
|
|
|
/* Disable PLL3 */
|
|
clrbits_le32(&cgc1_regs->pll3csr, BIT(0));
|
|
|
|
/* Gate off PFDxDIV */
|
|
setbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7) | BIT(15) | BIT(23) | BIT(31));
|
|
setbits_le32(&cgc1_regs->pll3div_pfd1, BIT(7) | BIT(15) | BIT(23) | BIT(31));
|
|
|
|
/* Gate off PFDx */
|
|
setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(7));
|
|
setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(15));
|
|
setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(23));
|
|
setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(31));
|
|
|
|
/* Select SOSC as source */
|
|
clrbits_le32(&cgc1_regs->pll3cfg, BIT(0));
|
|
|
|
switch (freq) {
|
|
case 540672000:
|
|
writel(0x16 << 16, &cgc1_regs->pll3cfg);
|
|
writel(0x16e3600, &cgc1_regs->pll3denom);
|
|
writel(0xc15c00, &cgc1_regs->pll3num);
|
|
break;
|
|
default:
|
|
hang();
|
|
}
|
|
|
|
/* Enable PLL3 */
|
|
setbits_le32(&cgc1_regs->pll3csr, BIT(0));
|
|
|
|
/* Wait for PLL3 clock ready */
|
|
while (!(readl(&cgc1_regs->pll3csr) & BIT(24)))
|
|
;
|
|
/* Gate on VCO */
|
|
clrbits_le32(&cgc1_regs->pll3div_vco, BIT(7));
|
|
|
|
clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F);
|
|
setbits_le32(&cgc1_regs->pll3pfdcfg, 30 << 0); /* PFD0 324M */
|
|
clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(7));
|
|
while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(6)))
|
|
;
|
|
|
|
clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 8);
|
|
setbits_le32(&cgc1_regs->pll3pfdcfg, 25 << 8); /* PFD1 389M */
|
|
clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(15));
|
|
while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(14)))
|
|
;
|
|
|
|
clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 16);
|
|
setbits_le32(&cgc1_regs->pll3pfdcfg, 30 << 16); /* PFD2 324M */
|
|
clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(23));
|
|
while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(22)))
|
|
;
|
|
|
|
clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 24);
|
|
setbits_le32(&cgc1_regs->pll3pfdcfg, 25 << 24); /* PFD3 389M */
|
|
clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(31));
|
|
while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(30)))
|
|
;
|
|
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd0, 0x3f3f3f3f);
|
|
if (IS_ENABLED(CONFIG_IMX8ULP_LD_MODE) || IS_ENABLED(CONFIG_IMX8ULP_ND_MODE))
|
|
clrsetbits_le32(&cgc1_regs->pll3div_pfd1, 0x3f3f3f3f, 0x03010000); /* Set PFD3 DIV1 to 194M, PFD3 DIV2 to 97M */
|
|
else
|
|
clrsetbits_le32(&cgc1_regs->pll3div_pfd1, 0x3f3f3f3f, 0x01000000); /* Set PFD3 DIV1 to 389M, PFD3 DIV2 to 194M */
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7));
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(15));
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(23));
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(31));
|
|
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(7));
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(15));
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(23));
|
|
clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(31));
|
|
|
|
/* NIC_AP:
|
|
* OD source PLL3 PFD0, 324M
|
|
* ND source FRO192, 192M
|
|
* LD source FRO192, 96M
|
|
*/
|
|
if (IS_ENABLED(CONFIG_IMX8ULP_LD_MODE)) {
|
|
clrsetbits_le32(&cgc1_regs->nicclk, GENMASK(26, 21), 1 << 21);
|
|
} else {
|
|
clrbits_le32(&cgc1_regs->nicclk, GENMASK(26, 21));
|
|
}
|
|
|
|
if (!IS_ENABLED(CONFIG_IMX8ULP_LD_MODE) && !IS_ENABLED(CONFIG_IMX8ULP_ND_MODE)) {
|
|
/* nicclk select pll3 pfd0 */
|
|
clrsetbits_le32(&cgc1_regs->nicclk, GENMASK(29, 28), BIT(28));
|
|
while (!(readl(&cgc1_regs->nicclk) & BIT(27)))
|
|
;
|
|
}
|
|
}
|
|
|
|
void cgc2_pll4_init(bool pll4_reset)
|
|
{
|
|
/* Check the NICLPAV first to ensure not from PLL4 PFD1 clock */
|
|
if ((readl(&cgc2_regs->niclpavclk) & GENMASK(29, 28)) == BIT(28)) {
|
|
/* switch to FRO 192 first */
|
|
clrbits_le32(&cgc2_regs->niclpavclk, GENMASK(29, 28));
|
|
while (!(readl(&cgc2_regs->niclpavclk) & BIT(27)))
|
|
;
|
|
}
|
|
|
|
/* Disable PFD DIV and clear DIV */
|
|
writel(0x80808080, &cgc2_regs->pll4div_pfd0);
|
|
writel(0x80808080, &cgc2_regs->pll4div_pfd1);
|
|
|
|
/* Gate off and clear PFD */
|
|
writel(0x80808080, &cgc2_regs->pll4pfdcfg);
|
|
|
|
if (pll4_reset) {
|
|
/* Disable PLL4 */
|
|
writel(0x0, &cgc2_regs->pll4csr);
|
|
|
|
/* Configure PLL4 to 528Mhz and clock source from SOSC */
|
|
writel(22 << 16, &cgc2_regs->pll4cfg);
|
|
writel(0x1, &cgc2_regs->pll4csr);
|
|
|
|
/* wait for PLL4 output valid */
|
|
while (!(readl(&cgc2_regs->pll4csr) & BIT(24)))
|
|
;
|
|
}
|
|
|
|
/* Enable all 4 PFDs */
|
|
setbits_le32(&cgc2_regs->pll4pfdcfg, 18 << 0); /* 528 */
|
|
setbits_le32(&cgc2_regs->pll4pfdcfg, 30 << 8); /* 316.8Mhz for NIC_LPAV */
|
|
setbits_le32(&cgc2_regs->pll4pfdcfg, 30 << 16); /* 316.8Mhz */
|
|
setbits_le32(&cgc2_regs->pll4pfdcfg, 24 << 24); /* 396Mhz */
|
|
|
|
clrbits_le32(&cgc2_regs->pll4pfdcfg, BIT(7) | BIT(15) | BIT(23) | BIT(31));
|
|
|
|
while ((readl(&cgc2_regs->pll4pfdcfg) & (BIT(30) | BIT(22) | BIT(14) | BIT(6)))
|
|
!= (BIT(30) | BIT(22) | BIT(14) | BIT(6)))
|
|
;
|
|
|
|
/* Enable PFD DIV */
|
|
clrbits_le32(&cgc2_regs->pll4div_pfd0, BIT(7) | BIT(15) | BIT(23) | BIT(31));
|
|
clrbits_le32(&cgc2_regs->pll4div_pfd1, BIT(7) | BIT(15) | BIT(23) | BIT(31));
|
|
|
|
/* NIC_LPAV:
|
|
* OD source PLL4 PFD1, 316.8M
|
|
* ND source FRO192, 192M
|
|
* LD source FRO192, 96M
|
|
*/
|
|
if (IS_ENABLED(CONFIG_IMX8ULP_LD_MODE)) {
|
|
clrsetbits_le32(&cgc2_regs->niclpavclk, GENMASK(26, 21), 1 << 21);
|
|
} else {
|
|
clrbits_le32(&cgc2_regs->niclpavclk, GENMASK(26, 21));
|
|
}
|
|
|
|
if (!IS_ENABLED(CONFIG_IMX8ULP_LD_MODE) && !IS_ENABLED(CONFIG_IMX8ULP_ND_MODE)) {
|
|
clrsetbits_le32(&cgc2_regs->niclpavclk, GENMASK(29, 28), BIT(28));
|
|
while (!(readl(&cgc2_regs->niclpavclk) & BIT(27)))
|
|
;
|
|
}
|
|
}
|
|
|
|
void cgc2_pll4_pfd_config(enum cgc_clk pllpfd, u32 pfd)
|
|
{
|
|
void __iomem *reg = &cgc2_regs->pll4div_pfd0;
|
|
u32 halt_mask = BIT(7) | BIT(15);
|
|
u32 pfd_shift = (pllpfd - PLL4_PFD0) * 8;
|
|
u32 val;
|
|
|
|
if (pllpfd < PLL4_PFD0 || pllpfd > PLL4_PFD3)
|
|
return;
|
|
|
|
if ((pllpfd - PLL4_PFD0) >> 1)
|
|
reg = &cgc2_regs->pll4div_pfd1;
|
|
|
|
halt_mask = halt_mask << (((pllpfd - PLL4_PFD0) & 0x1) * 16);
|
|
|
|
/* halt pfd div */
|
|
setbits_le32(reg, halt_mask);
|
|
|
|
/* gate pfd */
|
|
setbits_le32(&cgc2_regs->pll4pfdcfg, BIT(7) << pfd_shift);
|
|
|
|
val = readl(&cgc2_regs->pll4pfdcfg);
|
|
val &= ~(0x3f << pfd_shift);
|
|
val |= (pfd << pfd_shift);
|
|
writel(val, &cgc2_regs->pll4pfdcfg);
|
|
|
|
/* ungate */
|
|
clrbits_le32(&cgc2_regs->pll4pfdcfg, BIT(7) << pfd_shift);
|
|
|
|
/* Wait stable */
|
|
while ((readl(&cgc2_regs->pll4pfdcfg) & (BIT(6) << pfd_shift))
|
|
!= (BIT(6) << pfd_shift))
|
|
;
|
|
|
|
/* enable pfd div */
|
|
clrbits_le32(reg, halt_mask);
|
|
}
|
|
|
|
void cgc2_pll4_pfddiv_config(enum cgc_clk pllpfddiv, u32 div)
|
|
{
|
|
void __iomem *reg = &cgc2_regs->pll4div_pfd0;
|
|
u32 shift = ((pllpfddiv - PLL4_PFD0_DIV1) & 0x3) * 8;
|
|
|
|
if (pllpfddiv < PLL4_PFD0_DIV1 || pllpfddiv > PLL4_PFD3_DIV2)
|
|
return;
|
|
|
|
if ((pllpfddiv - PLL4_PFD0_DIV1) >> 2)
|
|
reg = &cgc2_regs->pll4div_pfd1;
|
|
|
|
/* Halt pfd div */
|
|
setbits_le32(reg, BIT(7) << shift);
|
|
|
|
/* Clear div */
|
|
clrbits_le32(reg, 0x3f << shift);
|
|
|
|
/* Set div*/
|
|
setbits_le32(reg, div << shift);
|
|
|
|
/* Enable pfd div */
|
|
clrbits_le32(reg, BIT(7) << shift);
|
|
}
|
|
|
|
void cgc2_ddrclk_config(u32 src, u32 div)
|
|
{
|
|
/* If reg lock is set, wait until unlock by HW */
|
|
/* This lock is triggered by div updating and ddrclk halt status change, */
|
|
while ((readl(&cgc2_regs->ddrclk) & BIT(31)))
|
|
;
|
|
|
|
writel((src << 28) | (div << 21), &cgc2_regs->ddrclk);
|
|
/* wait for DDRCLK switching done */
|
|
while (!(readl(&cgc2_regs->ddrclk) & BIT(27)))
|
|
;
|
|
}
|
|
|
|
void cgc2_ddrclk_wait_unlock(void)
|
|
{
|
|
while ((readl(&cgc2_regs->ddrclk) & BIT(31)))
|
|
;
|
|
}
|
|
|
|
void cgc2_lpav_init(enum cgc_clk clk)
|
|
{
|
|
u32 i, scs, reg;
|
|
const enum cgc_clk src[] = {FRO, PLL4_PFD1, SOSC, LVDS};
|
|
|
|
reg = readl(&cgc2_regs->niclpavclk);
|
|
scs = (reg >> 28) & 0x3;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
if (clk == src[i]) {
|
|
if (scs == i)
|
|
return;
|
|
|
|
reg &= ~(0x3 << 28);
|
|
reg |= (i << 28);
|
|
|
|
writel(reg, &cgc2_regs->niclpavclk);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == 4)
|
|
printf("Invalid clock source [%u] for LPAV\n", clk);
|
|
}
|
|
|
|
u32 cgc2_nic_get_rate(enum cgc_clk clk)
|
|
{
|
|
u32 reg, rate;
|
|
u32 scs, lpav_axi_clk, lpav_ahb_clk, lpav_bus_clk;
|
|
const enum cgc_clk src[] = {FRO, PLL4_PFD1, SOSC, LVDS};
|
|
|
|
reg = readl(&cgc2_regs->niclpavclk);
|
|
scs = (reg >> 28) & 0x3;
|
|
lpav_axi_clk = ((reg >> 21) & 0x3f) + 1;
|
|
lpav_ahb_clk = ((reg >> 14) & 0x3f) + 1;
|
|
lpav_bus_clk = ((reg >> 7) & 0x3f) + 1;
|
|
|
|
rate = cgc_clk_get_rate(src[scs]);
|
|
|
|
switch (clk) {
|
|
case LPAV_AXICLK:
|
|
rate = rate / lpav_axi_clk;
|
|
break;
|
|
case LPAV_AHBCLK:
|
|
rate = rate / (lpav_axi_clk * lpav_ahb_clk);
|
|
break;
|
|
case LPAV_BUSCLK:
|
|
rate = rate / (lpav_axi_clk * lpav_bus_clk);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
u32 decode_pll(enum cgc_clk pll)
|
|
{
|
|
u32 reg, infreq, mult;
|
|
u32 num, denom;
|
|
|
|
infreq = 24000000U;
|
|
/*
|
|
* Alought there are four choices for the bypass src,
|
|
* we choose SOSC 24M which is the default set in ROM.
|
|
* TODO: check more the comments
|
|
*/
|
|
switch (pll) {
|
|
case PLL2:
|
|
reg = readl(&cgc1_regs->pll2csr);
|
|
if (!(reg & BIT(24)))
|
|
return 0;
|
|
|
|
reg = readl(&cgc1_regs->pll2cfg);
|
|
mult = (reg >> 16) & 0x7F;
|
|
denom = readl(&cgc1_regs->pll2denom) & 0x3FFFFFFF;
|
|
num = readl(&cgc1_regs->pll2num) & 0x3FFFFFFF;
|
|
|
|
return (u64)infreq * mult + (u64)infreq * num / denom;
|
|
case PLL3:
|
|
reg = readl(&cgc1_regs->pll3csr);
|
|
if (!(reg & BIT(24)))
|
|
return 0;
|
|
|
|
reg = readl(&cgc1_regs->pll3cfg);
|
|
mult = (reg >> 16) & 0x7F;
|
|
denom = readl(&cgc1_regs->pll3denom) & 0x3FFFFFFF;
|
|
num = readl(&cgc1_regs->pll3num) & 0x3FFFFFFF;
|
|
|
|
return (u64)infreq * mult + (u64)infreq * num / denom;
|
|
case PLL4:
|
|
reg = readl(&cgc2_regs->pll4csr);
|
|
if (!(reg & BIT(24)))
|
|
return 0;
|
|
|
|
reg = readl(&cgc2_regs->pll4cfg);
|
|
mult = (reg >> 16) & 0x7F;
|
|
denom = readl(&cgc2_regs->pll4denom) & 0x3FFFFFFF;
|
|
num = readl(&cgc2_regs->pll4num) & 0x3FFFFFFF;
|
|
|
|
return (u64)infreq * mult + (u64)infreq * num / denom;
|
|
default:
|
|
printf("Unsupported pll clocks %d\n", pll);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 cgc_pll_vcodiv_rate(enum cgc_clk clk)
|
|
{
|
|
u32 reg, gate, div;
|
|
void __iomem *plldiv_vco;
|
|
enum cgc_clk pll;
|
|
|
|
if (clk == PLL3_VCODIV) {
|
|
plldiv_vco = &cgc1_regs->pll3div_vco;
|
|
pll = PLL3;
|
|
} else {
|
|
plldiv_vco = &cgc2_regs->pll4div_vco;
|
|
pll = PLL4;
|
|
}
|
|
|
|
reg = readl(plldiv_vco);
|
|
gate = BIT(7) & reg;
|
|
div = reg & 0x3F;
|
|
|
|
return gate ? 0 : decode_pll(pll) / (div + 1);
|
|
}
|
|
|
|
u32 cgc_pll_pfd_rate(enum cgc_clk clk)
|
|
{
|
|
u32 index, gate, vld, reg;
|
|
void __iomem *pllpfdcfg;
|
|
enum cgc_clk pll;
|
|
|
|
switch (clk) {
|
|
case PLL3_PFD0:
|
|
case PLL3_PFD1:
|
|
case PLL3_PFD2:
|
|
case PLL3_PFD3:
|
|
index = clk - PLL3_PFD0;
|
|
pllpfdcfg = &cgc1_regs->pll3pfdcfg;
|
|
pll = PLL3;
|
|
break;
|
|
case PLL4_PFD0:
|
|
case PLL4_PFD1:
|
|
case PLL4_PFD2:
|
|
case PLL4_PFD3:
|
|
index = clk - PLL4_PFD0;
|
|
pllpfdcfg = &cgc2_regs->pll4pfdcfg;
|
|
pll = PLL4;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
reg = readl(pllpfdcfg);
|
|
gate = reg & (BIT(7) << (index * 8));
|
|
vld = reg & (BIT(6) << (index * 8));
|
|
|
|
if (gate || !vld)
|
|
return 0;
|
|
|
|
return (u64)decode_pll(pll) * 18 / ((reg >> (index * 8)) & 0x3F);
|
|
}
|
|
|
|
u32 cgc_pll_pfd_div(enum cgc_clk clk)
|
|
{
|
|
void __iomem *base;
|
|
u32 pfd, index, gate, reg;
|
|
|
|
switch (clk) {
|
|
case PLL3_PFD0_DIV1:
|
|
case PLL3_PFD0_DIV2:
|
|
base = &cgc1_regs->pll3div_pfd0;
|
|
pfd = PLL3_PFD0;
|
|
index = clk - PLL3_PFD0_DIV1;
|
|
break;
|
|
case PLL3_PFD1_DIV1:
|
|
case PLL3_PFD1_DIV2:
|
|
base = &cgc1_regs->pll3div_pfd0;
|
|
pfd = PLL3_PFD1;
|
|
index = clk - PLL3_PFD0_DIV1;
|
|
break;
|
|
case PLL3_PFD2_DIV1:
|
|
case PLL3_PFD2_DIV2:
|
|
base = &cgc1_regs->pll3div_pfd1;
|
|
pfd = PLL3_PFD2;
|
|
index = clk - PLL3_PFD2_DIV1;
|
|
break;
|
|
case PLL3_PFD3_DIV1:
|
|
case PLL3_PFD3_DIV2:
|
|
base = &cgc1_regs->pll3div_pfd1;
|
|
pfd = PLL3_PFD3;
|
|
index = clk - PLL3_PFD2_DIV1;
|
|
break;
|
|
case PLL4_PFD0_DIV1:
|
|
case PLL4_PFD0_DIV2:
|
|
base = &cgc2_regs->pll4div_pfd0;
|
|
pfd = PLL4_PFD0;
|
|
index = clk - PLL4_PFD0_DIV1;
|
|
break;
|
|
case PLL4_PFD1_DIV1:
|
|
case PLL4_PFD1_DIV2:
|
|
base = &cgc2_regs->pll4div_pfd0;
|
|
pfd = PLL4_PFD1;
|
|
index = clk - PLL4_PFD0_DIV1;
|
|
break;
|
|
case PLL4_PFD2_DIV1:
|
|
case PLL4_PFD2_DIV2:
|
|
base = &cgc2_regs->pll4div_pfd1;
|
|
pfd = PLL4_PFD2;
|
|
index = clk - PLL4_PFD2_DIV1;
|
|
break;
|
|
case PLL4_PFD3_DIV1:
|
|
case PLL4_PFD3_DIV2:
|
|
base = &cgc2_regs->pll4div_pfd1;
|
|
pfd = PLL4_PFD3;
|
|
index = clk - PLL4_PFD2_DIV1;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
reg = readl(base);
|
|
gate = reg & (BIT(7) << (index * 8));
|
|
|
|
if (gate)
|
|
return 0;
|
|
|
|
return cgc_pll_pfd_rate(pfd) / (((reg >> (index * 8)) & 0x3F) + 1);
|
|
}
|
|
|
|
u32 cgc1_nic_get_rate(enum cgc_clk clk)
|
|
{
|
|
u32 reg, rate;
|
|
u32 scs, nic_ad_divplat, nic_per_divplat;
|
|
u32 xbar_ad_divplat, xbar_divbus, ad_slow;
|
|
const enum cgc_clk src[] = {FRO, PLL3_PFD0, SOSC, LVDS};
|
|
|
|
reg = readl(&cgc1_regs->nicclk);
|
|
scs = (reg >> 28) & 0x3;
|
|
nic_ad_divplat = ((reg >> 21) & 0x3f) + 1;
|
|
nic_per_divplat = ((reg >> 14) & 0x3f) + 1;
|
|
|
|
reg = readl(&cgc1_regs->xbarclk);
|
|
xbar_ad_divplat = ((reg >> 14) & 0x3f) + 1;
|
|
xbar_divbus = ((reg >> 7) & 0x3f) + 1;
|
|
ad_slow = (reg & 0x3f) + 1;
|
|
|
|
rate = cgc_clk_get_rate(src[scs]);
|
|
|
|
switch (clk) {
|
|
case NIC_APCLK:
|
|
rate = rate / nic_ad_divplat;
|
|
break;
|
|
case NIC_PERCLK:
|
|
rate = rate / (nic_ad_divplat * nic_per_divplat);
|
|
break;
|
|
case XBAR_APCLK:
|
|
rate = rate / (nic_ad_divplat * xbar_ad_divplat);
|
|
break;
|
|
case XBAR_BUSCLK:
|
|
rate = rate / (nic_ad_divplat * xbar_ad_divplat * xbar_divbus);
|
|
break;
|
|
case AD_SLOWCLK:
|
|
rate = rate / (nic_ad_divplat * xbar_ad_divplat * ad_slow);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
u32 cgc1_sosc_div(enum cgc_clk clk)
|
|
{
|
|
u32 reg, gate, index;
|
|
|
|
switch (clk) {
|
|
case SOSC:
|
|
return 24000000;
|
|
case SOSC_DIV1:
|
|
index = 0;
|
|
break;
|
|
case SOSC_DIV2:
|
|
index = 1;
|
|
break;
|
|
case SOSC_DIV3:
|
|
index = 2;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
reg = readl(&cgc1_regs->soscdiv);
|
|
gate = reg & (BIT(7) << (index * 8));
|
|
|
|
if (gate)
|
|
return 0;
|
|
|
|
return 24000000 / (((reg >> (index * 8)) & 0x3F) + 1);
|
|
}
|
|
|
|
u32 cgc1_fro_div(enum cgc_clk clk)
|
|
{
|
|
u32 reg, gate, vld, index;
|
|
|
|
switch (clk) {
|
|
case FRO:
|
|
return 192000000;
|
|
case FRO_DIV1:
|
|
index = 0;
|
|
break;
|
|
case FRO_DIV2:
|
|
index = 1;
|
|
break;
|
|
case FRO_DIV3:
|
|
index = 2;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
reg = readl(&cgc1_regs->frodiv);
|
|
gate = reg & (BIT(7) << (index * 8));
|
|
vld = reg & (BIT(6) << (index * 8));
|
|
|
|
if (gate || !vld)
|
|
return 0;
|
|
|
|
return 24000000 / (((reg >> (index * 8)) & 0x3F) + 1);
|
|
}
|
|
|
|
u32 cgc_clk_get_rate(enum cgc_clk clk)
|
|
{
|
|
switch (clk) {
|
|
case LVDS:
|
|
return 0; /* No external LVDS clock used */
|
|
case SOSC:
|
|
case SOSC_DIV1:
|
|
case SOSC_DIV2:
|
|
case SOSC_DIV3:
|
|
return cgc1_sosc_div(clk);
|
|
case FRO:
|
|
case FRO_DIV1:
|
|
case FRO_DIV2:
|
|
case FRO_DIV3:
|
|
return cgc1_fro_div(clk);
|
|
case PLL2:
|
|
case PLL3:
|
|
case PLL4:
|
|
return decode_pll(clk);
|
|
case PLL3_VCODIV:
|
|
case PLL4_VCODIV:
|
|
return cgc_pll_vcodiv_rate(clk);
|
|
case PLL3_PFD0:
|
|
case PLL3_PFD1:
|
|
case PLL3_PFD2:
|
|
case PLL3_PFD3:
|
|
case PLL4_PFD0:
|
|
case PLL4_PFD1:
|
|
case PLL4_PFD2:
|
|
case PLL4_PFD3:
|
|
return cgc_pll_pfd_rate(clk);
|
|
case PLL3_PFD0_DIV1:
|
|
case PLL3_PFD0_DIV2:
|
|
case PLL3_PFD1_DIV1:
|
|
case PLL3_PFD1_DIV2:
|
|
case PLL3_PFD2_DIV1:
|
|
case PLL3_PFD2_DIV2:
|
|
case PLL3_PFD3_DIV1:
|
|
case PLL3_PFD3_DIV2:
|
|
case PLL4_PFD0_DIV1:
|
|
case PLL4_PFD0_DIV2:
|
|
case PLL4_PFD1_DIV1:
|
|
case PLL4_PFD1_DIV2:
|
|
case PLL4_PFD2_DIV1:
|
|
case PLL4_PFD2_DIV2:
|
|
case PLL4_PFD3_DIV1:
|
|
case PLL4_PFD3_DIV2:
|
|
return cgc_pll_pfd_div(clk);
|
|
case NIC_APCLK:
|
|
case NIC_PERCLK:
|
|
case XBAR_APCLK:
|
|
case XBAR_BUSCLK:
|
|
case AD_SLOWCLK:
|
|
return cgc1_nic_get_rate(clk);
|
|
case LPAV_AXICLK:
|
|
case LPAV_AHBCLK:
|
|
case LPAV_BUSCLK:
|
|
return cgc2_nic_get_rate(clk);
|
|
default:
|
|
printf("Unsupported cgc clock: %d\n", clk);
|
|
return 0;
|
|
}
|
|
}
|