mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 13:03:40 +00:00
e3e01a6f94
The Renesas RZ/G2L SMARC Evaluation Board Kit consists of the RZ/G2L System-on-Module (SOM) based on the R9A07G044L2 SoC, and a common SMARC carrier board. This patch is based on the corresponding Linux v6.5 device tree (commit 52e12027d50affbf60c6c9c64db8017391b0c22e). Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
137 lines
3 KiB
Text
137 lines
3 KiB
Text
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
/*
|
|
* Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts
|
|
*
|
|
* Copyright (C) 2021 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
|
|
|
|
&pinctrl {
|
|
pinctrl-0 = <&sound_clk_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
can0_pins: can0 {
|
|
pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
|
|
<RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
|
|
};
|
|
|
|
/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
|
|
can0-stb-hog {
|
|
gpio-hog;
|
|
gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
line-name = "can0_stb";
|
|
};
|
|
|
|
can1_pins: can1 {
|
|
pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
|
|
<RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
|
|
};
|
|
|
|
/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
|
|
can1-stb-hog {
|
|
gpio-hog;
|
|
gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
line-name = "can1_stb";
|
|
};
|
|
|
|
i2c0_pins: i2c0 {
|
|
pins = "RIIC0_SDA", "RIIC0_SCL";
|
|
input-enable;
|
|
};
|
|
|
|
i2c1_pins: i2c1 {
|
|
pins = "RIIC1_SDA", "RIIC1_SCL";
|
|
input-enable;
|
|
};
|
|
|
|
i2c3_pins: i2c3 {
|
|
pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
|
|
<RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
|
|
};
|
|
|
|
scif0_pins: scif0 {
|
|
pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
|
|
<RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */
|
|
};
|
|
|
|
scif2_pins: scif2 {
|
|
pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
|
|
<RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
|
|
<RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
|
|
<RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
|
|
};
|
|
|
|
sd1-pwr-en-hog {
|
|
gpio-hog;
|
|
gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "sd1_pwr_en";
|
|
};
|
|
|
|
sdhi1_pins: sd1 {
|
|
sd1_data {
|
|
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
|
|
power-source = <3300>;
|
|
};
|
|
|
|
sd1_ctrl {
|
|
pins = "SD1_CLK", "SD1_CMD";
|
|
power-source = <3300>;
|
|
};
|
|
|
|
sd1_mux {
|
|
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
|
|
};
|
|
};
|
|
|
|
sdhi1_pins_uhs: sd1_uhs {
|
|
sd1_data_uhs {
|
|
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sd1_ctrl_uhs {
|
|
pins = "SD1_CLK", "SD1_CMD";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sd1_mux_uhs {
|
|
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
|
|
};
|
|
};
|
|
|
|
sound_clk_pins: sound_clk {
|
|
pins = "AUDIO_CLK1", "AUDIO_CLK2";
|
|
input-enable;
|
|
};
|
|
|
|
spi1_pins: spi1 {
|
|
pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
|
|
<RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
|
|
<RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
|
|
<RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
|
|
};
|
|
|
|
ssi0_pins: ssi0 {
|
|
pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
|
|
<RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
|
|
<RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
|
|
<RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
|
|
};
|
|
|
|
usb0_pins: usb0 {
|
|
pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
|
|
<RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
|
|
<RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
|
|
};
|
|
|
|
usb1_pins: usb1 {
|
|
pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
|
|
<RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
|
|
};
|
|
};
|
|
|