mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 13:03:40 +00:00
7b5b934313
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
285 lines
6.1 KiB
Text
285 lines
6.1 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2017 NXP
|
|
*
|
|
* Copyright 2019 Siemens AG
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "fsl-imx8qxp.dtsi"
|
|
#include "imx8qxp-capricorn-u-boot.dtsi"
|
|
|
|
/ {
|
|
model = "Siemens Giedi";
|
|
compatible = "siemens,capricorn", "fsl,imx8qxp";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyLP2,115200 earlycon=lpuart32,0x5a080000,115200";
|
|
stdout-path = &lpuart2;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
|
|
|
run {
|
|
label = "run";
|
|
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
flt {
|
|
label = "flt";
|
|
gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
svc {
|
|
label = "svc";
|
|
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
com1_tx {
|
|
label = "com1-tx";
|
|
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
com1_rx {
|
|
label = "com1-rx";
|
|
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
com2_tx {
|
|
label = "com2-tx";
|
|
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
com2_rx {
|
|
label = "com2-rx";
|
|
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
cloud {
|
|
label = "cloud";
|
|
gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
wlan {
|
|
label = "wlan";
|
|
gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
dbg1 {
|
|
label = "dbg1";
|
|
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
dbg2 {
|
|
label = "dbg2";
|
|
gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
dbg3 {
|
|
label = "dbg3";
|
|
gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
dbg4 {
|
|
label = "dbg4";
|
|
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
|
|
muxcgrp: imx8qxp-som {
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
|
fsl,pins = <
|
|
SC_P_ESAI0_FST_LSIO_GPIO0_IO01 0x06000021
|
|
SC_P_ESAI0_TX0_LSIO_GPIO0_IO04 0x06000021
|
|
SC_P_SAI0_TXC_LSIO_GPIO0_IO26 0x06000021
|
|
SC_P_SAI1_RXD_LSIO_GPIO0_IO29 0x06000021
|
|
SC_P_FLEXCAN1_RX_LSIO_GPIO1_IO17 0x06000021
|
|
SC_P_FLEXCAN1_TX_LSIO_GPIO1_IO18 0x06000021
|
|
SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x06000021
|
|
SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x06000021
|
|
SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x06000021
|
|
SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000021
|
|
SC_P_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x06000021
|
|
SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x06000021
|
|
SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000021
|
|
>;
|
|
};
|
|
|
|
pinctrl_lpi2c0: lpi2c0grp {
|
|
fsl,pins = <
|
|
SC_P_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x0C000020
|
|
SC_P_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x0C000020
|
|
>;
|
|
};
|
|
|
|
pinctrl_lpi2c1: lpi2c1grp {
|
|
fsl,pins = <
|
|
SC_P_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x0C000020
|
|
SC_P_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x0C000020
|
|
>;
|
|
};
|
|
|
|
pinctrl_lpuart2: lpuart2grp {
|
|
fsl,pins = <
|
|
SC_P_UART2_RX_ADMA_UART2_RX 0x06000020
|
|
SC_P_UART2_TX_ADMA_UART2_TX 0x06000020
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
|
|
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
|
|
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
|
|
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
|
|
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
|
|
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
|
|
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
|
|
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
|
|
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
|
|
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
|
|
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041
|
|
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021
|
|
SC_P_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x06000021
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
SC_P_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
|
|
SC_P_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
|
|
SC_P_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
|
|
SC_P_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
|
|
SC_P_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
|
|
SC_P_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
|
|
SC_P_ENET0_RGMII_TXD2_CONN_USDHC1_CD_B 0x06000021
|
|
//SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x06000021
|
|
SC_P_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x06000021
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec2: fec2grp {
|
|
fsl,pins = <
|
|
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0
|
|
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x000014a0
|
|
SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0
|
|
|
|
SC_P_ENET0_MDC_CONN_ENET1_MDC 0x00000060
|
|
SC_P_ENET0_MDIO_CONN_ENET1_MDIO 0x00000060
|
|
|
|
SC_P_ESAI0_FSR_CONN_ENET1_RCLK50M_IN 0x00000060
|
|
SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 0x00000060
|
|
SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 0x00000060
|
|
SC_P_ESAI0_TX2_RX3_CONN_ENET1_RMII_RX_ER 0x00000060
|
|
SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL 0x00000060
|
|
SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 0x00000060
|
|
SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 0x00000060
|
|
SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL 0x00000060 /* ERST: Reset pin */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lpi2c0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lpi2c1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&lpuart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lpuart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
clock-frequency=<52000000>;
|
|
no-1-8-v;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fec1 {
|
|
status ="disabled";
|
|
};
|
|
|
|
&fec2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec2>;
|
|
phy-mode = "rmii";
|
|
|
|
phy-handle = <ðphy1>;
|
|
fsl,magic-packet;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
};
|
|
ethphy1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|