mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 14:53:06 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
131 lines
2.9 KiB
C
131 lines
2.9 KiB
C
/*
|
|
* AU1X00 UART support
|
|
*
|
|
* Hardcoded to UART 0 for now
|
|
* Speed and options also hardcoded to 115200 8N1
|
|
*
|
|
* Copyright (c) 2003 Thomas.Lange@corelatus.se
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <asm/au1x00.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
|
|
/******************************************************************************
|
|
*
|
|
* serial_init - initialize a channel
|
|
*
|
|
* This routine initializes the number of data bits, parity
|
|
* and set the selected baud rate. Interrupts are disabled.
|
|
* Set the modem control signals if the option is selected.
|
|
*
|
|
* RETURNS: N/A
|
|
*/
|
|
|
|
static int au1x00_serial_init(void)
|
|
{
|
|
volatile u32 *uart_fifoctl = (volatile u32*)(UART0_ADDR+UART_FCR);
|
|
volatile u32 *uart_enable = (volatile u32*)(UART0_ADDR+UART_ENABLE);
|
|
|
|
/* Enable clocks first */
|
|
*uart_enable = UART_EN_CE;
|
|
|
|
/* Then release reset */
|
|
/* Must release reset before setting other regs */
|
|
*uart_enable = UART_EN_CE|UART_EN_E;
|
|
|
|
/* Activate fifos, reset tx and rx */
|
|
/* Set tx trigger level to 12 */
|
|
*uart_fifoctl = UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|
|
|
UART_FCR_CLEAR_XMIT|UART_FCR_T_TRIGGER_12;
|
|
|
|
serial_setbrg();
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void au1x00_serial_setbrg(void)
|
|
{
|
|
volatile u32 *uart_clk = (volatile u32*)(UART0_ADDR+UART_CLK);
|
|
volatile u32 *uart_lcr = (volatile u32*)(UART0_ADDR+UART_LCR);
|
|
volatile u32 *sys_powerctrl = (u32 *)SYS_POWERCTRL;
|
|
int sd;
|
|
int divisorx2;
|
|
|
|
/* sd is system clock divisor */
|
|
/* see section 10.4.5 in au1550 datasheet */
|
|
sd = (*sys_powerctrl & 0x03) + 2;
|
|
|
|
/* calulate 2x baudrate and round */
|
|
divisorx2 = ((CONFIG_SYS_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE)));
|
|
|
|
if (divisorx2 & 0x01)
|
|
divisorx2 = divisorx2 + 1;
|
|
|
|
*uart_clk = divisorx2 / 2;
|
|
|
|
/* Set parity, stop bits and word length to 8N1 */
|
|
*uart_lcr = UART_LCR_WLEN8;
|
|
}
|
|
|
|
static void au1x00_serial_putc(const char c)
|
|
{
|
|
volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
|
|
volatile u32 *uart_tx = (volatile u32*)(UART0_ADDR+UART_TX);
|
|
|
|
if (c == '\n')
|
|
au1x00_serial_putc('\r');
|
|
|
|
/* Wait for fifo to shift out some bytes */
|
|
while((*uart_lsr&UART_LSR_THRE)==0);
|
|
|
|
*uart_tx = (u32)c;
|
|
}
|
|
|
|
static int au1x00_serial_getc(void)
|
|
{
|
|
volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
|
|
char c;
|
|
|
|
while (!serial_tstc());
|
|
|
|
c = (*uart_rx&0xFF);
|
|
return c;
|
|
}
|
|
|
|
static int au1x00_serial_tstc(void)
|
|
{
|
|
volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
|
|
|
|
if(*uart_lsr&UART_LSR_DR){
|
|
/* Data in rfifo */
|
|
return(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct serial_device au1x00_serial_drv = {
|
|
.name = "au1x00_serial",
|
|
.start = au1x00_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = au1x00_serial_setbrg,
|
|
.putc = au1x00_serial_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = au1x00_serial_getc,
|
|
.tstc = au1x00_serial_tstc,
|
|
};
|
|
|
|
void au1x00_serial_initialize(void)
|
|
{
|
|
serial_register(&au1x00_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &au1x00_serial_drv;
|
|
}
|