mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
eb631d7fb0
Apparently the unit address in a DT node name is now supposed to be a single integer value, rather than a comma-separated list of individual cell values. Fix the U-Boot DTs to comply with this naming convention. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
349 lines
9.2 KiB
Text
349 lines
9.2 KiB
Text
#include <dt-bindings/clock/tegra210-car.h>
|
|
#include <dt-bindings/gpio/tegra-gpio.h>
|
|
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "nvidia,tegra210";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
pcie-controller@01003000 {
|
|
compatible = "nvidia,tegra210-pcie";
|
|
device_type = "pci";
|
|
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
|
|
0x0 0x01003800 0x0 0x00000800 /* AFI registers */
|
|
0x0 0x02000000 0x0 0x10000000>; /* configuration space */
|
|
reg-names = "pads", "afi", "cs";
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
|
|
interrupt-names = "intr", "msi";
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
|
|
0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
|
|
0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
|
|
0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
|
|
0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
|
|
|
|
clocks = <&tegra_car TEGRA210_CLK_PCIE>,
|
|
<&tegra_car TEGRA210_CLK_AFI>,
|
|
<&tegra_car TEGRA210_CLK_PLL_E>,
|
|
<&tegra_car TEGRA210_CLK_CML0>;
|
|
clock-names = "pex", "afi", "pll_e", "cml";
|
|
resets = <&tegra_car 70>,
|
|
<&tegra_car 72>,
|
|
<&tegra_car 74>;
|
|
reset-names = "pex", "afi", "pcie_x";
|
|
status = "disabled";
|
|
|
|
phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>;
|
|
phy-names = "pcie";
|
|
|
|
pci@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
|
|
reg = <0x000800 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <4>;
|
|
};
|
|
|
|
pci@2,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
|
|
reg = <0x001000 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <1>;
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@50041000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0x50041000 0x0 0x1000>,
|
|
<0x0 0x50042000 0x0 0x2000>,
|
|
<0x0 0x50044000 0x0 0x2000>,
|
|
<0x0 0x50046000 0x0 0x2000>;
|
|
interrupts = <GIC_PPI 9
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
tegra_car: clock@60006000 {
|
|
compatible = "nvidia,tegra210-car";
|
|
reg = <0x0 0x60006000 0x0 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gpio: gpio@6000d000 {
|
|
compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
|
|
reg = <0x0 0x6000d000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
i2c@7000c000 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c000 0x0 0x100>;
|
|
interrupts = <0 38 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c400 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c400 0x0 0x100>;
|
|
interrupts = <0 84 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 54>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c500 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c500 0x0 0x100>;
|
|
interrupts = <0 92 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 67>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c700 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c700 0x0 0x100>;
|
|
interrupts = <0 120 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 103>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000d000 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000d000 0x0 0x100>;
|
|
interrupts = <0 53 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 47>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000d100 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000d100 0x0 0x100>;
|
|
interrupts = <0 53 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 47>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uarta: serial@70006000 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006000 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTA>;
|
|
resets = <&tegra_car 6>;
|
|
reset-names = "serial";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartb: serial@70006040 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006040 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTB>;
|
|
resets = <&tegra_car 7>;
|
|
reset-names = "serial";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartc: serial@70006200 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006200 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTC>;
|
|
resets = <&tegra_car 55>;
|
|
reset-names = "serial";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartd: serial@70006300 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006300 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTD>;
|
|
resets = <&tegra_car 65>;
|
|
reset-names = "serial";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d400 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d400 0x0 0x200>;
|
|
interrupts = <0 59 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC1>;
|
|
resets = <&tegra_car 41>;
|
|
reset-names = "spi";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d600 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d600 0x0 0x200>;
|
|
interrupts = <0 82 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC2>;
|
|
resets = <&tegra_car 44>;
|
|
reset-names = "spi";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d800 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d800 0x0 0x200>;
|
|
interrupts = <0 83 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC3>;
|
|
resets = <&tegra_car 46>;
|
|
reset-names = "spi";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000da00 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000da00 0x0 0x200>;
|
|
interrupts = <0 93 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC4>;
|
|
resets = <&tegra_car 68>;
|
|
reset-names = "spi";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@70410000 {
|
|
compatible = "nvidia,tegra210-qspi";
|
|
reg = <0x0 0x70410000 0x0 0x1000>;
|
|
interrupts = <0 10 0x04>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 211>;
|
|
status = "disabled";
|
|
};
|
|
|
|
padctl: padctl@7009f000 {
|
|
compatible = "nvidia,tegra210-xusb-padctl";
|
|
reg = <0x0 0x7009f000 0x0 0x1000>;
|
|
resets = <&tegra_car 142>;
|
|
reset-names = "padctl";
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
sdhci@700b0000 {
|
|
compatible = "nvidia,tegra210-sdhci";
|
|
reg = <0x0 0x700b0000 0x0 0x200>;
|
|
interrupts = <0 14 0x04>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
|
|
resets = <&tegra_car 14>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0200 {
|
|
compatible = "nvidia,tegra210-sdhci";
|
|
reg = <0x0 0x700b0200 0x0 0x200>;
|
|
interrupts = <0 15 0x04>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
|
|
resets = <&tegra_car 9>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0400 {
|
|
compatible = "nvidia,tegra210-sdhci";
|
|
reg = <0x0 0x700b0400 0x0 0x200>;
|
|
interrupts = <0 19 0x04>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
|
|
resets = <&tegra_car 69>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0600 {
|
|
compatible = "nvidia,tegra210-sdhci";
|
|
reg = <0x0 0x700b0600 0x0 0x200>;
|
|
interrupts = <0 31 0x04>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
|
|
resets = <&tegra_car 15>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@7d000000 {
|
|
compatible = "nvidia,tegra210-ehci";
|
|
reg = <0x0 0x7d000000 0x0 0x4000>;
|
|
interrupts = <0 20 0x04>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USBD>;
|
|
resets = <&tegra_car 22>;
|
|
reset-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@7d004000 {
|
|
compatible = "nvidia,tegra210-ehci";
|
|
reg = <0x0 0x7d004000 0x0 0x4000>;
|
|
interrupts = < 53 >;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USB2>;
|
|
resets = <&tegra_car 58>;
|
|
reset-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
};
|