mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
e09b88cd08
This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Bin Meng <bmeng.cn@gmail.com>
933 lines
21 KiB
C
933 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* mtu3_gadget_ep0.c - MediaTek USB3 DRD peripheral driver ep0 handling
|
|
*
|
|
* Copyright (c) 2016 MediaTek Inc.
|
|
*
|
|
* Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
|
|
*/
|
|
|
|
#include <linux/iopoll.h>
|
|
#include <linux/usb/composite.h>
|
|
|
|
#include "mtu3.h"
|
|
|
|
/* ep0 is always mtu3->in_eps[0] */
|
|
#define next_ep0_request(mtu) next_request((mtu)->ep0)
|
|
|
|
/* for high speed test mode; see USB 2.0 spec 7.1.20 */
|
|
static const u8 mtu3_test_packet[53] = {
|
|
/* implicit SYNC then DATA0 to start */
|
|
|
|
/* JKJKJKJK x9 */
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
/* JJKKJJKK x8 */
|
|
0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
|
|
/* JJJJKKKK x8 */
|
|
0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
|
|
/* JJJJJJJKKKKKKK x8 */
|
|
0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
/* JJJJJJJK x8 */
|
|
0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
|
|
/* JKKKKKKK x10, JK */
|
|
0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e,
|
|
/* implicit CRC16 then EOP to end */
|
|
};
|
|
|
|
static char *decode_ep0_state(struct mtu3 *mtu)
|
|
{
|
|
switch (mtu->ep0_state) {
|
|
case MU3D_EP0_STATE_SETUP:
|
|
return "SETUP";
|
|
case MU3D_EP0_STATE_TX:
|
|
return "IN";
|
|
case MU3D_EP0_STATE_RX:
|
|
return "OUT";
|
|
case MU3D_EP0_STATE_TX_END:
|
|
return "TX-END";
|
|
case MU3D_EP0_STATE_STALL:
|
|
return "STALL";
|
|
default:
|
|
return "??";
|
|
}
|
|
}
|
|
|
|
static void ep0_req_giveback(struct mtu3 *mtu, struct usb_request *req)
|
|
{
|
|
mtu3_req_complete(mtu->ep0, req, 0);
|
|
}
|
|
|
|
static int
|
|
forward_to_driver(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
|
|
__releases(mtu->lock)
|
|
__acquires(mtu->lock)
|
|
{
|
|
int ret;
|
|
|
|
if (!mtu->gadget_driver)
|
|
return -EOPNOTSUPP;
|
|
|
|
spin_unlock(&mtu->lock);
|
|
ret = mtu->gadget_driver->setup(&mtu->g, setup);
|
|
spin_lock(&mtu->lock);
|
|
|
|
dev_dbg(mtu->dev, "%s ret %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static inline void writel_rep(volatile void *addr, const void *buffer,
|
|
unsigned int count)
|
|
{
|
|
if (count) {
|
|
const u32 *buf = buffer;
|
|
|
|
do {
|
|
writel(*buf++, addr);
|
|
} while (--count);
|
|
}
|
|
}
|
|
|
|
static inline void readl_rep(const volatile void *addr, void *buffer,
|
|
unsigned int count)
|
|
{
|
|
if (count) {
|
|
u32 *buf = buffer;
|
|
|
|
do {
|
|
u32 x = readl(addr);
|
|
*buf++ = x;
|
|
} while (--count);
|
|
}
|
|
}
|
|
|
|
static void ep0_write_fifo(struct mtu3_ep *mep, const u8 *src, u16 len)
|
|
{
|
|
void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0;
|
|
u16 index = 0;
|
|
|
|
dev_dbg(mep->mtu->dev, "%s: ep%din, len=%d, buf=%p\n",
|
|
__func__, mep->epnum, len, src);
|
|
|
|
if (len >= 4) {
|
|
writel_rep(fifo, src, len >> 2);
|
|
index = len & ~0x03;
|
|
}
|
|
if (len & 0x02) {
|
|
writew(*(u16 *)&src[index], fifo);
|
|
index += 2;
|
|
}
|
|
if (len & 0x01)
|
|
writeb(src[index], fifo);
|
|
}
|
|
|
|
static void ep0_read_fifo(struct mtu3_ep *mep, u8 *dst, u16 len)
|
|
{
|
|
void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0;
|
|
u32 value;
|
|
u16 index = 0;
|
|
|
|
dev_dbg(mep->mtu->dev, "%s: ep%dout len=%d buf=%p\n",
|
|
__func__, mep->epnum, len, dst);
|
|
|
|
if (len >= 4) {
|
|
readl_rep(fifo, dst, len >> 2);
|
|
index = len & ~0x03;
|
|
}
|
|
if (len & 0x3) {
|
|
value = readl(fifo);
|
|
memcpy(&dst[index], &value, len & 0x3);
|
|
}
|
|
}
|
|
|
|
static void ep0_load_test_packet(struct mtu3 *mtu)
|
|
{
|
|
/*
|
|
* because the length of test packet is less than max packet of HS ep0,
|
|
* write it into fifo directly.
|
|
*/
|
|
ep0_write_fifo(mtu->ep0, mtu3_test_packet, sizeof(mtu3_test_packet));
|
|
}
|
|
|
|
/*
|
|
* A. send STALL for setup transfer without data stage:
|
|
* set SENDSTALL and SETUPPKTRDY at the same time;
|
|
* B. send STALL for other cases:
|
|
* set SENDSTALL only.
|
|
*/
|
|
static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy)
|
|
{
|
|
struct mtu3 *mtu = mep0->mtu;
|
|
void __iomem *mbase = mtu->mac_base;
|
|
u32 csr;
|
|
|
|
/* EP0_SENTSTALL is W1C */
|
|
csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
|
|
if (set)
|
|
csr |= EP0_SENDSTALL | pktrdy;
|
|
else
|
|
csr = (csr & ~EP0_SENDSTALL) | EP0_SENTSTALL;
|
|
mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
|
|
|
|
mtu->delayed_status = false;
|
|
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
|
|
|
|
dev_dbg(mtu->dev, "ep0: %s STALL, ep0_state: %s\n",
|
|
set ? "SEND" : "CLEAR", decode_ep0_state(mtu));
|
|
}
|
|
|
|
static void ep0_do_status_stage(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
u32 value;
|
|
|
|
value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
|
|
mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND);
|
|
}
|
|
|
|
static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq);
|
|
|
|
static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{}
|
|
|
|
static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct mtu3_request *mreq;
|
|
struct mtu3 *mtu;
|
|
struct usb_set_sel_req sel;
|
|
|
|
memcpy(&sel, req->buf, sizeof(sel));
|
|
|
|
mreq = to_mtu3_request(req);
|
|
mtu = mreq->mtu;
|
|
dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n",
|
|
sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel);
|
|
}
|
|
|
|
/* queue data stage to handle 6 byte SET_SEL request */
|
|
static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
|
|
{
|
|
int ret;
|
|
u16 length = le16_to_cpu(setup->wLength);
|
|
|
|
if (unlikely(length != 6)) {
|
|
dev_err(mtu->dev, "%s wrong wLength:%d\n",
|
|
__func__, length);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mtu->ep0_req.mep = mtu->ep0;
|
|
mtu->ep0_req.request.length = 6;
|
|
mtu->ep0_req.request.buf = mtu->setup_buf;
|
|
mtu->ep0_req.request.complete = ep0_set_sel_complete;
|
|
ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
|
|
|
|
return ret < 0 ? ret : 1;
|
|
}
|
|
|
|
static int
|
|
ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
|
|
{
|
|
struct mtu3_ep *mep = NULL;
|
|
int handled = 1;
|
|
u8 result[2] = {0, 0};
|
|
u8 epnum = 0;
|
|
int is_in;
|
|
|
|
switch (setup->bRequestType & USB_RECIP_MASK) {
|
|
case USB_RECIP_DEVICE:
|
|
result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
|
|
result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
|
|
|
|
if (mtu->g.speed >= USB_SPEED_SUPER) {
|
|
result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
|
|
result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
|
|
}
|
|
|
|
dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__,
|
|
result[0], mtu->u1_enable, mtu->u2_enable);
|
|
|
|
break;
|
|
case USB_RECIP_INTERFACE:
|
|
break;
|
|
case USB_RECIP_ENDPOINT:
|
|
epnum = (u8)le16_to_cpu(setup->wIndex);
|
|
is_in = epnum & USB_DIR_IN;
|
|
epnum &= USB_ENDPOINT_NUMBER_MASK;
|
|
|
|
if (epnum >= mtu->num_eps) {
|
|
handled = -EINVAL;
|
|
break;
|
|
}
|
|
if (!epnum)
|
|
break;
|
|
|
|
mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum;
|
|
if (!mep->desc) {
|
|
handled = -EINVAL;
|
|
break;
|
|
}
|
|
if (mep->flags & MTU3_EP_STALL)
|
|
result[0] |= 1 << USB_ENDPOINT_HALT;
|
|
|
|
break;
|
|
default:
|
|
/* class, vendor, etc ... delegate */
|
|
handled = 0;
|
|
break;
|
|
}
|
|
|
|
if (handled > 0) {
|
|
int ret;
|
|
|
|
/* prepare a data stage for GET_STATUS */
|
|
dev_dbg(mtu->dev, "get_status=%x\n", *(u16 *)result);
|
|
memcpy(mtu->setup_buf, result, sizeof(result));
|
|
mtu->ep0_req.mep = mtu->ep0;
|
|
mtu->ep0_req.request.length = 2;
|
|
mtu->ep0_req.request.buf = &mtu->setup_buf;
|
|
mtu->ep0_req.request.complete = ep0_dummy_complete;
|
|
ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
|
|
if (ret < 0)
|
|
handled = ret;
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
int handled = 1;
|
|
u32 value = 0;
|
|
|
|
switch (le16_to_cpu(setup->wIndex) >> 8) {
|
|
case TEST_J:
|
|
dev_dbg(mtu->dev, "TEST_J\n");
|
|
mtu->test_mode_nr = TEST_J_MODE;
|
|
break;
|
|
case TEST_K:
|
|
dev_dbg(mtu->dev, "TEST_K\n");
|
|
mtu->test_mode_nr = TEST_K_MODE;
|
|
break;
|
|
case TEST_SE0_NAK:
|
|
dev_dbg(mtu->dev, "TEST_SE0_NAK\n");
|
|
mtu->test_mode_nr = TEST_SE0_NAK_MODE;
|
|
break;
|
|
case TEST_PACKET:
|
|
dev_dbg(mtu->dev, "TEST_PACKET\n");
|
|
mtu->test_mode_nr = TEST_PACKET_MODE;
|
|
break;
|
|
default:
|
|
handled = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
mtu->test_mode = true;
|
|
|
|
/* no TX completion interrupt, and need restart platform after test */
|
|
if (mtu->test_mode_nr == TEST_PACKET_MODE)
|
|
ep0_load_test_packet(mtu);
|
|
|
|
/* send status before entering test mode. */
|
|
ep0_do_status_stage(mtu);
|
|
|
|
/* wait for ACK status sent by host */
|
|
readl_poll_timeout(mbase + U3D_EP0CSR, value,
|
|
!(value & EP0_DATAEND), 5000);
|
|
|
|
mtu3_writel(mbase, U3D_USB2_TEST_MODE, mtu->test_mode_nr);
|
|
|
|
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
|
|
|
|
out:
|
|
return handled;
|
|
}
|
|
|
|
static int ep0_handle_feature_dev(struct mtu3 *mtu,
|
|
struct usb_ctrlrequest *setup, bool set)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
int handled = -EINVAL;
|
|
u32 lpc;
|
|
|
|
switch (le16_to_cpu(setup->wValue)) {
|
|
case USB_DEVICE_REMOTE_WAKEUP:
|
|
mtu->may_wakeup = !!set;
|
|
handled = 1;
|
|
break;
|
|
case USB_DEVICE_TEST_MODE:
|
|
if (!set || (mtu->g.speed != USB_SPEED_HIGH) ||
|
|
(le16_to_cpu(setup->wIndex) & 0xff))
|
|
break;
|
|
|
|
handled = handle_test_mode(mtu, setup);
|
|
break;
|
|
case USB_DEVICE_U1_ENABLE:
|
|
if (mtu->g.speed < USB_SPEED_SUPER ||
|
|
mtu->g.state != USB_STATE_CONFIGURED)
|
|
break;
|
|
|
|
lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
|
|
if (set)
|
|
lpc |= SW_U1_REQUEST_ENABLE;
|
|
else
|
|
lpc &= ~SW_U1_REQUEST_ENABLE;
|
|
mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
|
|
|
|
mtu->u1_enable = !!set;
|
|
handled = 1;
|
|
break;
|
|
case USB_DEVICE_U2_ENABLE:
|
|
if (mtu->g.speed < USB_SPEED_SUPER ||
|
|
mtu->g.state != USB_STATE_CONFIGURED)
|
|
break;
|
|
|
|
lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
|
|
if (set)
|
|
lpc |= SW_U2_REQUEST_ENABLE;
|
|
else
|
|
lpc &= ~SW_U2_REQUEST_ENABLE;
|
|
mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
|
|
|
|
mtu->u2_enable = !!set;
|
|
handled = 1;
|
|
break;
|
|
default:
|
|
handled = -EINVAL;
|
|
break;
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
static int ep0_handle_feature(struct mtu3 *mtu,
|
|
struct usb_ctrlrequest *setup, bool set)
|
|
{
|
|
struct mtu3_ep *mep;
|
|
int handled = -EINVAL;
|
|
int is_in;
|
|
u16 value;
|
|
u16 index;
|
|
u8 epnum;
|
|
|
|
value = le16_to_cpu(setup->wValue);
|
|
index = le16_to_cpu(setup->wIndex);
|
|
|
|
switch (setup->bRequestType & USB_RECIP_MASK) {
|
|
case USB_RECIP_DEVICE:
|
|
handled = ep0_handle_feature_dev(mtu, setup, set);
|
|
break;
|
|
case USB_RECIP_INTERFACE:
|
|
/* superspeed only */
|
|
if (value == USB_INTRF_FUNC_SUSPEND &&
|
|
mtu->g.speed >= USB_SPEED_SUPER) {
|
|
/*
|
|
* forward the request because function drivers
|
|
* should handle it
|
|
*/
|
|
handled = 0;
|
|
}
|
|
break;
|
|
case USB_RECIP_ENDPOINT:
|
|
epnum = index & USB_ENDPOINT_NUMBER_MASK;
|
|
if (epnum == 0 || epnum >= mtu->num_eps ||
|
|
value != USB_ENDPOINT_HALT)
|
|
break;
|
|
|
|
is_in = index & USB_DIR_IN;
|
|
mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum;
|
|
if (!mep->desc)
|
|
break;
|
|
|
|
handled = 1;
|
|
/* ignore request if endpoint is wedged */
|
|
if (mep->flags & MTU3_EP_WEDGE)
|
|
break;
|
|
|
|
mtu3_ep_stall_set(mep, set);
|
|
break;
|
|
default:
|
|
/* class, vendor, etc ... delegate */
|
|
handled = 0;
|
|
break;
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
/*
|
|
* handle all control requests can be handled
|
|
* returns:
|
|
* negative errno - error happened
|
|
* zero - need delegate SETUP to gadget driver
|
|
* positive - already handled
|
|
*/
|
|
static int handle_standard_request(struct mtu3 *mtu,
|
|
struct usb_ctrlrequest *setup)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
enum usb_device_state state = mtu->g.state;
|
|
int handled = -EINVAL;
|
|
u32 dev_conf;
|
|
u16 value;
|
|
|
|
value = le16_to_cpu(setup->wValue);
|
|
|
|
/* the gadget driver handles everything except what we must handle */
|
|
switch (setup->bRequest) {
|
|
case USB_REQ_SET_ADDRESS:
|
|
/* change it after the status stage */
|
|
mtu->address = (u8)(value & 0x7f);
|
|
dev_dbg(mtu->dev, "set address to 0x%x\n", mtu->address);
|
|
|
|
dev_conf = mtu3_readl(mbase, U3D_DEVICE_CONF);
|
|
dev_conf &= ~DEV_ADDR_MSK;
|
|
dev_conf |= DEV_ADDR(mtu->address);
|
|
mtu3_writel(mbase, U3D_DEVICE_CONF, dev_conf);
|
|
|
|
if (mtu->address)
|
|
usb_gadget_set_state(&mtu->g, USB_STATE_ADDRESS);
|
|
else
|
|
usb_gadget_set_state(&mtu->g, USB_STATE_DEFAULT);
|
|
|
|
handled = 1;
|
|
break;
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
if (state == USB_STATE_ADDRESS) {
|
|
usb_gadget_set_state(&mtu->g,
|
|
USB_STATE_CONFIGURED);
|
|
} else if (state == USB_STATE_CONFIGURED) {
|
|
/*
|
|
* USB2 spec sec 9.4.7, if wValue is 0 then dev
|
|
* is moved to addressed state
|
|
*/
|
|
if (!value)
|
|
usb_gadget_set_state(&mtu->g,
|
|
USB_STATE_ADDRESS);
|
|
}
|
|
handled = 0;
|
|
break;
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
handled = ep0_handle_feature(mtu, setup, 0);
|
|
break;
|
|
case USB_REQ_SET_FEATURE:
|
|
handled = ep0_handle_feature(mtu, setup, 1);
|
|
break;
|
|
case USB_REQ_GET_STATUS:
|
|
handled = ep0_get_status(mtu, setup);
|
|
break;
|
|
case USB_REQ_SET_SEL:
|
|
handled = ep0_set_sel(mtu, setup);
|
|
break;
|
|
case USB_REQ_SET_ISOCH_DELAY:
|
|
handled = 1;
|
|
break;
|
|
default:
|
|
/* delegate SET_CONFIGURATION, etc */
|
|
handled = 0;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
/* receive an data packet (OUT) */
|
|
static void ep0_rx_state(struct mtu3 *mtu)
|
|
{
|
|
struct mtu3_request *mreq;
|
|
struct usb_request *req;
|
|
void __iomem *mbase = mtu->mac_base;
|
|
u32 maxp;
|
|
u32 csr;
|
|
u16 count = 0;
|
|
|
|
dev_dbg(mtu->dev, "%s\n", __func__);
|
|
|
|
csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
|
|
mreq = next_ep0_request(mtu);
|
|
req = &mreq->request;
|
|
|
|
/* read packet and ack; or stall because of gadget driver bug */
|
|
if (req) {
|
|
void *buf = req->buf + req->actual;
|
|
unsigned int len = req->length - req->actual;
|
|
|
|
/* read the buffer */
|
|
count = mtu3_readl(mbase, U3D_RXCOUNT0);
|
|
if (count > len) {
|
|
req->status = -EOVERFLOW;
|
|
count = len;
|
|
}
|
|
ep0_read_fifo(mtu->ep0, buf, count);
|
|
req->actual += count;
|
|
csr |= EP0_RXPKTRDY;
|
|
|
|
maxp = mtu->g.ep0->maxpacket;
|
|
if (count < maxp || req->actual == req->length) {
|
|
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
|
|
dev_dbg(mtu->dev, "ep0 state: %s\n",
|
|
decode_ep0_state(mtu));
|
|
|
|
csr |= EP0_DATAEND;
|
|
} else {
|
|
req = NULL;
|
|
}
|
|
} else {
|
|
csr |= EP0_RXPKTRDY | EP0_SENDSTALL;
|
|
dev_dbg(mtu->dev, "%s: SENDSTALL\n", __func__);
|
|
}
|
|
|
|
mtu3_writel(mbase, U3D_EP0CSR, csr);
|
|
|
|
/* give back the request if have received all data */
|
|
if (req)
|
|
ep0_req_giveback(mtu, req);
|
|
}
|
|
|
|
/* transmitting to the host (IN) */
|
|
static void ep0_tx_state(struct mtu3 *mtu)
|
|
{
|
|
struct mtu3_request *mreq = next_ep0_request(mtu);
|
|
struct usb_request *req;
|
|
u32 csr;
|
|
u8 *src;
|
|
u32 count;
|
|
u32 maxp;
|
|
|
|
dev_dbg(mtu->dev, "%s\n", __func__);
|
|
|
|
if (!mreq)
|
|
return;
|
|
|
|
maxp = mtu->g.ep0->maxpacket;
|
|
req = &mreq->request;
|
|
|
|
/* load the data */
|
|
src = (u8 *)req->buf + req->actual;
|
|
count = min(maxp, req->length - req->actual);
|
|
if (count)
|
|
ep0_write_fifo(mtu->ep0, src, count);
|
|
|
|
dev_dbg(mtu->dev, "%s act=%d, len=%d, cnt=%d, maxp=%d zero=%d\n",
|
|
__func__, req->actual, req->length, count, maxp, req->zero);
|
|
|
|
req->actual += count;
|
|
|
|
if ((count < maxp) ||
|
|
((req->actual == req->length) && !req->zero))
|
|
mtu->ep0_state = MU3D_EP0_STATE_TX_END;
|
|
|
|
/* send it out, triggering a "txpktrdy cleared" irq */
|
|
csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
|
|
mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr | EP0_TXPKTRDY);
|
|
|
|
dev_dbg(mtu->dev, "%s ep0csr=0x%x\n", __func__,
|
|
mtu3_readl(mtu->mac_base, U3D_EP0CSR));
|
|
}
|
|
|
|
static void ep0_read_setup(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
|
|
{
|
|
struct mtu3_request *mreq;
|
|
u32 count;
|
|
u32 csr;
|
|
|
|
csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
|
|
count = mtu3_readl(mtu->mac_base, U3D_RXCOUNT0);
|
|
|
|
ep0_read_fifo(mtu->ep0, (u8 *)setup, count);
|
|
|
|
dev_dbg(mtu->dev, "SETUP req%02x.%02x v%04x i%04x l%04x\n",
|
|
setup->bRequestType, setup->bRequest,
|
|
le16_to_cpu(setup->wValue), le16_to_cpu(setup->wIndex),
|
|
le16_to_cpu(setup->wLength));
|
|
|
|
/* clean up any leftover transfers */
|
|
mreq = next_ep0_request(mtu);
|
|
if (mreq)
|
|
ep0_req_giveback(mtu, &mreq->request);
|
|
|
|
if (le16_to_cpu(setup->wLength) == 0) {
|
|
; /* no data stage, nothing to do */
|
|
} else if (setup->bRequestType & USB_DIR_IN) {
|
|
mtu3_writel(mtu->mac_base, U3D_EP0CSR,
|
|
csr | EP0_SETUPPKTRDY | EP0_DPHTX);
|
|
mtu->ep0_state = MU3D_EP0_STATE_TX;
|
|
} else {
|
|
mtu3_writel(mtu->mac_base, U3D_EP0CSR,
|
|
(csr | EP0_SETUPPKTRDY) & (~EP0_DPHTX));
|
|
mtu->ep0_state = MU3D_EP0_STATE_RX;
|
|
}
|
|
}
|
|
|
|
static int ep0_handle_setup(struct mtu3 *mtu)
|
|
__releases(mtu->lock)
|
|
__acquires(mtu->lock)
|
|
{
|
|
struct usb_ctrlrequest setup;
|
|
struct mtu3_request *mreq;
|
|
int handled = 0;
|
|
|
|
ep0_read_setup(mtu, &setup);
|
|
|
|
if ((setup.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
|
|
handled = handle_standard_request(mtu, &setup);
|
|
|
|
dev_dbg(mtu->dev, "handled %d, ep0_state: %s\n",
|
|
handled, decode_ep0_state(mtu));
|
|
|
|
if (handled < 0)
|
|
goto stall;
|
|
else if (handled > 0)
|
|
goto finish;
|
|
|
|
handled = forward_to_driver(mtu, &setup);
|
|
if (handled < 0) {
|
|
stall:
|
|
dev_dbg(mtu->dev, "%s stall (%d)\n", __func__, handled);
|
|
|
|
ep0_stall_set(mtu->ep0, true,
|
|
le16_to_cpu(setup.wLength) ? 0 : EP0_SETUPPKTRDY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
finish:
|
|
if (mtu->test_mode) {
|
|
; /* nothing to do */
|
|
} else if (handled == USB_GADGET_DELAYED_STATUS) {
|
|
|
|
mreq = next_ep0_request(mtu);
|
|
if (mreq) {
|
|
/* already asked us to continue delayed status */
|
|
ep0_do_status_stage(mtu);
|
|
ep0_req_giveback(mtu, &mreq->request);
|
|
} else {
|
|
/* do delayed STATUS stage till receive ep0_queue */
|
|
mtu->delayed_status = true;
|
|
}
|
|
} else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */
|
|
|
|
ep0_do_status_stage(mtu);
|
|
/* complete zlp request directly */
|
|
mreq = next_ep0_request(mtu);
|
|
if (mreq && !mreq->request.length)
|
|
ep0_req_giveback(mtu, &mreq->request);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
struct mtu3_request *mreq;
|
|
u32 int_status;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 csr;
|
|
u32 len;
|
|
|
|
int_status = mtu3_readl(mbase, U3D_EPISR);
|
|
int_status &= mtu3_readl(mbase, U3D_EPIER);
|
|
mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */
|
|
|
|
/* only handle ep0's */
|
|
if (!(int_status & (EP0ISR | SETUPENDISR)))
|
|
return IRQ_NONE;
|
|
|
|
/* abort current SETUP, and process new one */
|
|
if (int_status & SETUPENDISR)
|
|
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
|
|
|
|
csr = mtu3_readl(mbase, U3D_EP0CSR);
|
|
|
|
dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr);
|
|
|
|
/* we sent a stall.. need to clear it now.. */
|
|
if (csr & EP0_SENTSTALL) {
|
|
ep0_stall_set(mtu->ep0, false, 0);
|
|
csr = mtu3_readl(mbase, U3D_EP0CSR);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu));
|
|
|
|
switch (mtu->ep0_state) {
|
|
case MU3D_EP0_STATE_TX:
|
|
/* irq on clearing txpktrdy */
|
|
if ((csr & EP0_FIFOFULL) == 0) {
|
|
ep0_tx_state(mtu);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
break;
|
|
case MU3D_EP0_STATE_RX:
|
|
/* irq on set rxpktrdy */
|
|
if (csr & EP0_RXPKTRDY) {
|
|
ep0_rx_state(mtu);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
break;
|
|
case MU3D_EP0_STATE_TX_END:
|
|
mtu3_writel(mbase, U3D_EP0CSR,
|
|
(csr & EP0_W1C_BITS) | EP0_DATAEND);
|
|
|
|
mreq = next_ep0_request(mtu);
|
|
if (mreq)
|
|
ep0_req_giveback(mtu, &mreq->request);
|
|
|
|
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
|
|
ret = IRQ_HANDLED;
|
|
dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu));
|
|
break;
|
|
case MU3D_EP0_STATE_SETUP:
|
|
if (!(csr & EP0_SETUPPKTRDY))
|
|
break;
|
|
|
|
len = mtu3_readl(mbase, U3D_RXCOUNT0);
|
|
if (len != 8) {
|
|
dev_err(mtu->dev, "SETUP packet len %d != 8 ?\n", len);
|
|
break;
|
|
}
|
|
|
|
ep0_handle_setup(mtu);
|
|
ret = IRQ_HANDLED;
|
|
break;
|
|
default:
|
|
/* can't happen */
|
|
ep0_stall_set(mtu->ep0, true, 0);
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mtu3_ep0_enable(struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
/* always enabled */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mtu3_ep0_disable(struct usb_ep *ep)
|
|
{
|
|
/* always enabled */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq)
|
|
{
|
|
struct mtu3 *mtu = mep->mtu;
|
|
|
|
mreq->mtu = mtu;
|
|
mreq->request.actual = 0;
|
|
mreq->request.status = -EINPROGRESS;
|
|
|
|
dev_dbg(mtu->dev, "%s %s (ep0_state: %s), len#%d\n", __func__,
|
|
mep->name, decode_ep0_state(mtu), mreq->request.length);
|
|
|
|
switch (mtu->ep0_state) {
|
|
case MU3D_EP0_STATE_SETUP:
|
|
case MU3D_EP0_STATE_RX: /* control-OUT data */
|
|
case MU3D_EP0_STATE_TX: /* control-IN data */
|
|
break;
|
|
default:
|
|
dev_err(mtu->dev, "%s, error in ep0 state %s\n", __func__,
|
|
decode_ep0_state(mtu));
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mtu->delayed_status) {
|
|
mtu->delayed_status = false;
|
|
ep0_do_status_stage(mtu);
|
|
/* needn't giveback the request for handling delay STATUS */
|
|
return 0;
|
|
}
|
|
|
|
if (!list_empty(&mep->req_list))
|
|
return -EBUSY;
|
|
|
|
list_add_tail(&mreq->list, &mep->req_list);
|
|
|
|
/* sequence #1, IN ... start writing the data */
|
|
if (mtu->ep0_state == MU3D_EP0_STATE_TX)
|
|
ep0_tx_state(mtu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtu3_ep0_queue(struct usb_ep *ep,
|
|
struct usb_request *req, gfp_t gfp)
|
|
{
|
|
struct mtu3_ep *mep;
|
|
struct mtu3_request *mreq;
|
|
struct mtu3 *mtu;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
if (!ep || !req)
|
|
return -EINVAL;
|
|
|
|
mep = to_mtu3_ep(ep);
|
|
mtu = mep->mtu;
|
|
mreq = to_mtu3_request(req);
|
|
|
|
spin_lock_irqsave(&mtu->lock, flags);
|
|
ret = ep0_queue(mep, mreq);
|
|
spin_unlock_irqrestore(&mtu->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int mtu3_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
/* we just won't support this */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mtu3_ep0_halt(struct usb_ep *ep, int value)
|
|
{
|
|
struct mtu3_ep *mep;
|
|
struct mtu3 *mtu;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
if (!ep || !value)
|
|
return -EINVAL;
|
|
|
|
mep = to_mtu3_ep(ep);
|
|
mtu = mep->mtu;
|
|
|
|
dev_dbg(mtu->dev, "%s\n", __func__);
|
|
|
|
spin_lock_irqsave(&mtu->lock, flags);
|
|
|
|
if (!list_empty(&mep->req_list)) {
|
|
ret = -EBUSY;
|
|
goto cleanup;
|
|
}
|
|
|
|
switch (mtu->ep0_state) {
|
|
/*
|
|
* stalls are usually issued after parsing SETUP packet, either
|
|
* directly in irq context from setup() or else later.
|
|
*/
|
|
case MU3D_EP0_STATE_TX:
|
|
case MU3D_EP0_STATE_TX_END:
|
|
case MU3D_EP0_STATE_RX:
|
|
case MU3D_EP0_STATE_SETUP:
|
|
ep0_stall_set(mtu->ep0, true, 0);
|
|
break;
|
|
default:
|
|
dev_dbg(mtu->dev, "ep0 can't halt in state %s\n",
|
|
decode_ep0_state(mtu));
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
cleanup:
|
|
spin_unlock_irqrestore(&mtu->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
const struct usb_ep_ops mtu3_ep0_ops = {
|
|
.enable = mtu3_ep0_enable,
|
|
.disable = mtu3_ep0_disable,
|
|
.alloc_request = mtu3_alloc_request,
|
|
.free_request = mtu3_free_request,
|
|
.queue = mtu3_ep0_queue,
|
|
.dequeue = mtu3_ep0_dequeue,
|
|
.set_halt = mtu3_ep0_halt,
|
|
};
|