mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
f10643cf8a
At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
838 lines
22 KiB
C
838 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* mtu3_core.c - hardware access layer and gadget init/exit of
|
|
* MediaTek usb3 Dual-Role Controller Driver
|
|
*
|
|
* Copyright (C) 2016 MediaTek Inc.
|
|
*
|
|
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
|
|
*/
|
|
|
|
#include <linux/log2.h>
|
|
#include <linux/bitmap.h>
|
|
|
|
#include "mtu3.h"
|
|
#include "mtu3_dr.h"
|
|
|
|
static int ep_fifo_alloc(struct mtu3_ep *mep, u32 seg_size)
|
|
{
|
|
struct mtu3_fifo_info *fifo = mep->fifo;
|
|
struct mtu3 *mtu = mep->mtu;
|
|
u32 fz_bit;
|
|
|
|
mep->fifo_seg_size = mtu->is_u3_ip ? USB_SS_MAXP : USB_HS_MAXP;
|
|
|
|
fz_bit = find_first_zero_bit(fifo->bitmap, fifo->limit);
|
|
if (fz_bit >= fifo->limit)
|
|
return -EOVERFLOW;
|
|
|
|
mep->fifo_size = mep->fifo_seg_size * (mep->slot + 1);
|
|
mep->fifo_addr = fifo->base + mep->fifo_size * fz_bit;
|
|
generic_set_bit(fz_bit, fifo->bitmap);
|
|
|
|
dev_dbg(mep->mtu->dev, "%s fifo:%#x/%#x, bit: %d\n",
|
|
__func__, mep->fifo_seg_size, mep->fifo_size, fz_bit);
|
|
|
|
return mep->fifo_addr;
|
|
}
|
|
|
|
static void ep_fifo_free(struct mtu3_ep *mep)
|
|
{
|
|
struct mtu3_fifo_info *fifo = mep->fifo;
|
|
u32 addr = mep->fifo_addr;
|
|
u32 bit;
|
|
|
|
if (unlikely(addr < fifo->base))
|
|
return;
|
|
|
|
bit = (addr - fifo->base) / mep->fifo_size;
|
|
generic_clear_bit(bit, fifo->bitmap);
|
|
mep->fifo_size = 0;
|
|
mep->fifo_seg_size = 0;
|
|
|
|
dev_dbg(mep->mtu->dev, "%s size:%#x/%#x, bit: %d\n",
|
|
__func__, mep->fifo_seg_size, mep->fifo_size, bit);
|
|
}
|
|
|
|
/* enable/disable U3D SS function */
|
|
static inline void mtu3_ss_func_set(struct mtu3 *mtu, bool enable)
|
|
{
|
|
/* If usb3_en==0, LTSSM will go to SS.Disable state */
|
|
if (enable)
|
|
mtu3_setbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
|
|
else
|
|
mtu3_clrbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
|
|
|
|
dev_dbg(mtu->dev, "USB3_EN = %d\n", !!enable);
|
|
}
|
|
|
|
/* set/clear U3D HS device soft connect */
|
|
static inline void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)
|
|
{
|
|
if (enable) {
|
|
mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
|
|
SOFT_CONN | SUSPENDM_ENABLE);
|
|
} else {
|
|
mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
|
|
SOFT_CONN | SUSPENDM_ENABLE);
|
|
}
|
|
dev_dbg(mtu->dev, "SOFTCONN = %d\n", !!enable);
|
|
}
|
|
|
|
/* only port0 of U2/U3 supports device mode */
|
|
static int mtu3_device_enable(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *ibase = mtu->ippc_base;
|
|
u32 check_clk = 0;
|
|
|
|
mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
|
|
|
|
if (mtu->is_u3_ip) {
|
|
check_clk = SSUSB_U3_MAC_RST_B_STS;
|
|
mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),
|
|
(SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN |
|
|
SSUSB_U3_PORT_HOST_SEL));
|
|
}
|
|
mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
|
|
(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
|
|
SSUSB_U2_PORT_HOST_SEL));
|
|
|
|
return ssusb_check_clocks(mtu->ssusb, check_clk);
|
|
}
|
|
|
|
static void mtu3_device_disable(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *ibase = mtu->ippc_base;
|
|
|
|
if (mtu->is_u3_ip)
|
|
mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
|
|
(SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN));
|
|
|
|
mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
|
|
SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
|
|
|
|
mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
|
|
}
|
|
|
|
/* reset U3D's device module. */
|
|
static void mtu3_device_reset(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *ibase = mtu->ippc_base;
|
|
|
|
mtu3_setbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST);
|
|
udelay(1);
|
|
mtu3_clrbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST);
|
|
}
|
|
|
|
static void mtu3_intr_status_clear(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
|
|
/* Clear EP0 and Tx/Rx EPn interrupts status */
|
|
mtu3_writel(mbase, U3D_EPISR, ~0x0);
|
|
/* Clear U2 USB common interrupts status */
|
|
mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0);
|
|
/* Clear U3 LTSSM interrupts status */
|
|
mtu3_writel(mbase, U3D_LTSSM_INTR, ~0x0);
|
|
/* Clear speed change interrupt status */
|
|
mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0);
|
|
/* Clear QMU interrupt status */
|
|
mtu3_writel(mbase, U3D_QISAR0, ~0x0);
|
|
}
|
|
|
|
/* disable all interrupts */
|
|
static void mtu3_intr_disable(struct mtu3 *mtu)
|
|
{
|
|
/* Disable level 1 interrupts */
|
|
mtu3_writel(mtu->mac_base, U3D_LV1IECR, ~0x0);
|
|
/* Disable endpoint interrupts */
|
|
mtu3_writel(mtu->mac_base, U3D_EPIECR, ~0x0);
|
|
mtu3_intr_status_clear(mtu);
|
|
}
|
|
|
|
/* enable system global interrupt */
|
|
static void mtu3_intr_enable(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
u32 value;
|
|
|
|
/*Enable level 1 interrupts (BMU, QMU, MAC3, DMA, MAC2, EPCTL) */
|
|
value = BMU_INTR | QMU_INTR | MAC3_INTR | MAC2_INTR | EP_CTRL_INTR;
|
|
mtu3_writel(mbase, U3D_LV1IESR, value);
|
|
|
|
/* Enable U2 common USB interrupts */
|
|
value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;
|
|
mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);
|
|
|
|
if (mtu->is_u3_ip) {
|
|
/* Enable U3 LTSSM interrupts */
|
|
value = HOT_RST_INTR | WARM_RST_INTR |
|
|
ENTER_U3_INTR | EXIT_U3_INTR;
|
|
mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value);
|
|
}
|
|
|
|
/* Enable QMU interrupts. */
|
|
value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT |
|
|
RXQ_LENERR_INT | RXQ_ZLPERR_INT;
|
|
mtu3_writel(mbase, U3D_QIESR1, value);
|
|
|
|
/* Enable speed change interrupt */
|
|
mtu3_writel(mbase, U3D_DEV_LINK_INTR_ENABLE, SSUSB_DEV_SPEED_CHG_INTR);
|
|
}
|
|
|
|
void mtu3_set_speed(struct mtu3 *mtu, enum usb_device_speed speed)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
|
|
if (speed > mtu->max_speed)
|
|
speed = mtu->max_speed;
|
|
|
|
switch (speed) {
|
|
case USB_SPEED_FULL:
|
|
/* disable U3 SS function */
|
|
mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
|
|
/* disable HS function */
|
|
mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
|
|
/* HS/FS detected by HW */
|
|
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
|
|
break;
|
|
case USB_SPEED_SUPER:
|
|
mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
|
|
SSUSB_U3_PORT_SSP_SPEED);
|
|
break;
|
|
case USB_SPEED_SUPER_PLUS:
|
|
mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
|
|
SSUSB_U3_PORT_SSP_SPEED);
|
|
break;
|
|
default:
|
|
dev_err(mtu->dev, "invalid speed: %d\n", speed);
|
|
return;
|
|
}
|
|
|
|
mtu->speed = speed;
|
|
dev_dbg(mtu->dev, "set speed: %s\n", usb_speed_string(mtu->speed));
|
|
}
|
|
|
|
/* reset: u2 - data toggle, u3 - SeqN, flow control status etc */
|
|
static void mtu3_ep_reset(struct mtu3_ep *mep)
|
|
{
|
|
struct mtu3 *mtu = mep->mtu;
|
|
u32 rst_bit = EP_RST(mep->is_in, mep->epnum);
|
|
|
|
mtu3_setbits(mtu->mac_base, U3D_EP_RST, rst_bit);
|
|
mtu3_clrbits(mtu->mac_base, U3D_EP_RST, rst_bit);
|
|
}
|
|
|
|
/* set/clear the stall and toggle bits for non-ep0 */
|
|
void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
|
|
{
|
|
struct mtu3 *mtu = mep->mtu;
|
|
void __iomem *mbase = mtu->mac_base;
|
|
u8 epnum = mep->epnum;
|
|
u32 csr;
|
|
|
|
if (mep->is_in) { /* TX */
|
|
csr = mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)) & TX_W1C_BITS;
|
|
if (set)
|
|
csr |= TX_SENDSTALL;
|
|
else
|
|
csr = (csr & (~TX_SENDSTALL)) | TX_SENTSTALL;
|
|
mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr);
|
|
} else { /* RX */
|
|
csr = mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)) & RX_W1C_BITS;
|
|
if (set)
|
|
csr |= RX_SENDSTALL;
|
|
else
|
|
csr = (csr & (~RX_SENDSTALL)) | RX_SENTSTALL;
|
|
mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr);
|
|
}
|
|
|
|
if (!set) {
|
|
mtu3_ep_reset(mep);
|
|
mep->flags &= ~MTU3_EP_STALL;
|
|
} else {
|
|
mep->flags |= MTU3_EP_STALL;
|
|
}
|
|
|
|
dev_dbg(mtu->dev, "%s: %s\n", mep->name,
|
|
set ? "SEND STALL" : "CLEAR STALL, with EP RESET");
|
|
}
|
|
|
|
void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
|
|
{
|
|
if (mtu->is_u3_ip && mtu->speed >= USB_SPEED_SUPER)
|
|
mtu3_ss_func_set(mtu, is_on);
|
|
else
|
|
mtu3_hs_softconn_set(mtu, is_on);
|
|
|
|
dev_info(mtu->dev, "gadget (%s) pullup D%s\n",
|
|
usb_speed_string(mtu->speed), is_on ? "+" : "-");
|
|
}
|
|
|
|
void mtu3_start(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
|
|
dev_dbg(mtu->dev, "%s devctl 0x%x\n", __func__,
|
|
mtu3_readl(mbase, U3D_DEVICE_CONTROL));
|
|
|
|
/* Initialize the default interrupts */
|
|
mtu3_intr_enable(mtu);
|
|
mtu->is_active = 1;
|
|
|
|
if (mtu->softconnect)
|
|
mtu3_dev_on_off(mtu, 1);
|
|
}
|
|
|
|
void mtu3_stop(struct mtu3 *mtu)
|
|
{
|
|
dev_dbg(mtu->dev, "%s\n", __func__);
|
|
|
|
mtu3_intr_disable(mtu);
|
|
|
|
if (mtu->softconnect)
|
|
mtu3_dev_on_off(mtu, 0);
|
|
|
|
mtu->is_active = 0;
|
|
}
|
|
|
|
/* for non-ep0 */
|
|
int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
|
|
int interval, int burst, int mult)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
bool gen2cp = mtu->gen2cp;
|
|
int epnum = mep->epnum;
|
|
u32 csr0, csr1, csr2;
|
|
int fifo_sgsz, fifo_addr;
|
|
int num_pkts;
|
|
|
|
fifo_addr = ep_fifo_alloc(mep, mep->maxp);
|
|
if (fifo_addr < 0) {
|
|
dev_err(mtu->dev, "alloc ep fifo failed(%d)\n", mep->maxp);
|
|
return -ENOMEM;
|
|
}
|
|
fifo_sgsz = ilog2(mep->fifo_seg_size);
|
|
dev_dbg(mtu->dev, "%s fifosz: %x(%x/%x)\n", __func__, fifo_sgsz,
|
|
mep->fifo_seg_size, mep->fifo_size);
|
|
|
|
if (mep->is_in) {
|
|
csr0 = TX_TXMAXPKTSZ(mep->maxp);
|
|
csr0 |= TX_DMAREQEN;
|
|
|
|
num_pkts = (burst + 1) * (mult + 1) - 1;
|
|
csr1 = TX_SS_BURST(burst) | TX_SLOT(mep->slot);
|
|
csr1 |= TX_MAX_PKT(gen2cp, num_pkts) | TX_MULT(gen2cp, mult);
|
|
|
|
csr2 = TX_FIFOADDR(fifo_addr >> 4);
|
|
csr2 |= TX_FIFOSEGSIZE(fifo_sgsz);
|
|
|
|
switch (mep->type) {
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
csr1 |= TX_TYPE(TYPE_BULK);
|
|
break;
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
csr1 |= TX_TYPE(TYPE_ISO);
|
|
csr2 |= TX_BINTERVAL(interval);
|
|
break;
|
|
case USB_ENDPOINT_XFER_INT:
|
|
csr1 |= TX_TYPE(TYPE_INT);
|
|
csr2 |= TX_BINTERVAL(interval);
|
|
break;
|
|
}
|
|
|
|
/* Enable QMU Done interrupt */
|
|
mtu3_setbits(mbase, U3D_QIESR0, QMU_TX_DONE_INT(epnum));
|
|
|
|
mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr0);
|
|
mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), csr1);
|
|
mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), csr2);
|
|
|
|
dev_dbg(mtu->dev, "U3D_TX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n",
|
|
epnum, mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)),
|
|
mtu3_readl(mbase, MU3D_EP_TXCR1(epnum)),
|
|
mtu3_readl(mbase, MU3D_EP_TXCR2(epnum)));
|
|
} else {
|
|
csr0 = RX_RXMAXPKTSZ(mep->maxp);
|
|
csr0 |= RX_DMAREQEN;
|
|
|
|
num_pkts = (burst + 1) * (mult + 1) - 1;
|
|
csr1 = RX_SS_BURST(burst) | RX_SLOT(mep->slot);
|
|
csr1 |= RX_MAX_PKT(gen2cp, num_pkts) | RX_MULT(gen2cp, mult);
|
|
|
|
csr2 = RX_FIFOADDR(fifo_addr >> 4);
|
|
csr2 |= RX_FIFOSEGSIZE(fifo_sgsz);
|
|
|
|
switch (mep->type) {
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
csr1 |= RX_TYPE(TYPE_BULK);
|
|
break;
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
csr1 |= RX_TYPE(TYPE_ISO);
|
|
csr2 |= RX_BINTERVAL(interval);
|
|
break;
|
|
case USB_ENDPOINT_XFER_INT:
|
|
csr1 |= RX_TYPE(TYPE_INT);
|
|
csr2 |= RX_BINTERVAL(interval);
|
|
break;
|
|
}
|
|
|
|
/*Enable QMU Done interrupt */
|
|
mtu3_setbits(mbase, U3D_QIESR0, QMU_RX_DONE_INT(epnum));
|
|
|
|
mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr0);
|
|
mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), csr1);
|
|
mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), csr2);
|
|
|
|
dev_dbg(mtu->dev, "U3D_RX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n",
|
|
epnum, mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)),
|
|
mtu3_readl(mbase, MU3D_EP_RXCR1(epnum)),
|
|
mtu3_readl(mbase, MU3D_EP_RXCR2(epnum)));
|
|
}
|
|
|
|
dev_dbg(mtu->dev, "csr0:%#x, csr1:%#x, csr2:%#x\n", csr0, csr1, csr2);
|
|
dev_dbg(mtu->dev, "%s: %s, fifo-addr:%#x, fifo-size:%#x(%#x/%#x)\n",
|
|
__func__, mep->name, mep->fifo_addr, mep->fifo_size,
|
|
fifo_sgsz, mep->fifo_seg_size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* for non-ep0 */
|
|
void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
int epnum = mep->epnum;
|
|
|
|
if (mep->is_in) {
|
|
mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), 0);
|
|
mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), 0);
|
|
mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), 0);
|
|
mtu3_setbits(mbase, U3D_QIECR0, QMU_TX_DONE_INT(epnum));
|
|
} else {
|
|
mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), 0);
|
|
mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), 0);
|
|
mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), 0);
|
|
mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum));
|
|
}
|
|
|
|
mtu3_ep_reset(mep);
|
|
ep_fifo_free(mep);
|
|
|
|
dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name);
|
|
}
|
|
|
|
/*
|
|
* Two scenarios:
|
|
* 1. when device IP supports SS, the fifo of EP0, TX EPs, RX EPs
|
|
* are separated;
|
|
* 2. when supports only HS, the fifo is shared for all EPs, and
|
|
* the capability registers of @EPNTXFFSZ or @EPNRXFFSZ indicate
|
|
* the total fifo size of non-ep0, and ep0's is fixed to 64B,
|
|
* so the total fifo size is 64B + @EPNTXFFSZ;
|
|
* Due to the first 64B should be reserved for EP0, non-ep0's fifo
|
|
* starts from offset 64 and are divided into two equal parts for
|
|
* TX or RX EPs for simplification.
|
|
*/
|
|
static void get_ep_fifo_config(struct mtu3 *mtu)
|
|
{
|
|
struct mtu3_fifo_info *tx_fifo;
|
|
struct mtu3_fifo_info *rx_fifo;
|
|
u32 fifosize;
|
|
|
|
if (mtu->is_u3_ip) {
|
|
fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
|
|
tx_fifo = &mtu->tx_fifo;
|
|
tx_fifo->base = 0;
|
|
tx_fifo->limit = fifosize / MTU3_U3IP_EP_FIFO_UNIT;
|
|
bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
|
|
|
|
fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNRXFFSZ);
|
|
rx_fifo = &mtu->rx_fifo;
|
|
rx_fifo->base = 0;
|
|
rx_fifo->limit = fifosize / MTU3_U3IP_EP_FIFO_UNIT;
|
|
bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
|
|
mtu->slot = MTU3_U3_IP_SLOT_DEFAULT;
|
|
} else {
|
|
fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
|
|
tx_fifo = &mtu->tx_fifo;
|
|
tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE;
|
|
tx_fifo->limit = (fifosize / MTU3_U2IP_EP_FIFO_UNIT) >> 1;
|
|
bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
|
|
|
|
rx_fifo = &mtu->rx_fifo;
|
|
rx_fifo->base = tx_fifo->base +
|
|
tx_fifo->limit * MTU3_U2IP_EP_FIFO_UNIT;
|
|
rx_fifo->limit = tx_fifo->limit;
|
|
bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
|
|
mtu->slot = MTU3_U2_IP_SLOT_DEFAULT;
|
|
}
|
|
|
|
dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n",
|
|
__func__, tx_fifo->base, tx_fifo->limit,
|
|
rx_fifo->base, rx_fifo->limit);
|
|
}
|
|
|
|
void mtu3_ep0_setup(struct mtu3 *mtu)
|
|
{
|
|
u32 maxpacket = mtu->g.ep0->maxpacket;
|
|
u32 csr;
|
|
|
|
dev_dbg(mtu->dev, "%s maxpacket: %d\n", __func__, maxpacket);
|
|
|
|
csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR);
|
|
csr &= ~EP0_MAXPKTSZ_MSK;
|
|
csr |= EP0_MAXPKTSZ(maxpacket);
|
|
csr &= EP0_W1C_BITS;
|
|
mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
|
|
|
|
/* Enable EP0 interrupt */
|
|
mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR);
|
|
}
|
|
|
|
static int mtu3_mem_alloc(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
struct mtu3_ep *ep_array;
|
|
int in_ep_num, out_ep_num;
|
|
u32 cap_epinfo;
|
|
int i;
|
|
|
|
cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO);
|
|
in_ep_num = CAP_TX_EP_NUM(cap_epinfo);
|
|
out_ep_num = CAP_RX_EP_NUM(cap_epinfo);
|
|
|
|
dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n",
|
|
mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num,
|
|
mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num);
|
|
|
|
/* one for ep0, another is reserved */
|
|
mtu->num_eps = min(in_ep_num, out_ep_num) + 1;
|
|
ep_array = kcalloc(mtu->num_eps * 2, sizeof(*ep_array), GFP_KERNEL);
|
|
if (!ep_array)
|
|
return -ENOMEM;
|
|
|
|
mtu->ep_array = ep_array;
|
|
mtu->in_eps = ep_array;
|
|
mtu->out_eps = &ep_array[mtu->num_eps];
|
|
/* ep0 uses in_eps[0], out_eps[0] is reserved */
|
|
mtu->ep0 = mtu->in_eps;
|
|
mtu->ep0->mtu = mtu;
|
|
mtu->ep0->epnum = 0;
|
|
|
|
for (i = 1; i < mtu->num_eps; i++) {
|
|
struct mtu3_ep *mep = mtu->in_eps + i;
|
|
|
|
mep->fifo = &mtu->tx_fifo;
|
|
mep = mtu->out_eps + i;
|
|
mep->fifo = &mtu->rx_fifo;
|
|
}
|
|
|
|
get_ep_fifo_config(mtu);
|
|
mtu3_qmu_init(mtu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtu3_mem_free(struct mtu3 *mtu)
|
|
{
|
|
mtu3_qmu_exit(mtu);
|
|
kfree(mtu->ep_array);
|
|
}
|
|
|
|
static void mtu3_regs_init(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
|
|
/* be sure interrupts are disabled before registration of ISR */
|
|
mtu3_intr_disable(mtu);
|
|
|
|
if (mtu->is_u3_ip) {
|
|
/* disable LGO_U1/U2 by default */
|
|
mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,
|
|
SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
|
|
/* enable accept LGO_U1/U2 link command from host */
|
|
mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL,
|
|
SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE);
|
|
/* device responses to u3_exit from host automatically */
|
|
mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
|
|
/* automatically build U2 link when U3 detect fail */
|
|
mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH);
|
|
/* auto clear SOFT_CONN when clear USB3_EN if work as HS */
|
|
mtu3_setbits(mbase, U3D_U3U2_SWITCH_CTRL, SOFTCON_CLR_AUTO_EN);
|
|
}
|
|
|
|
/* delay about 0.1us from detecting reset to send chirp-K */
|
|
mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK);
|
|
/* U2/U3 detected by HW */
|
|
mtu3_writel(mbase, U3D_DEVICE_CONF, 0);
|
|
/* enable automatical HWRW from L1 */
|
|
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE);
|
|
|
|
mtu3_set_speed(mtu, mtu->max_speed);
|
|
ssusb_set_force_mode(mtu->ssusb, MTU3_DR_FORCE_DEVICE);
|
|
|
|
if (mtu->force_vbus)
|
|
mtu3_setbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON);
|
|
else /* vbus detected by HW */
|
|
mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON);
|
|
}
|
|
|
|
static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
enum usb_device_speed udev_speed;
|
|
u32 maxpkt = 64;
|
|
u32 link;
|
|
u32 speed;
|
|
|
|
link = mtu3_readl(mbase, U3D_DEV_LINK_INTR);
|
|
link &= mtu3_readl(mbase, U3D_DEV_LINK_INTR_ENABLE);
|
|
mtu3_writel(mbase, U3D_DEV_LINK_INTR, link); /* W1C */
|
|
dev_dbg(mtu->dev, "=== LINK[%x] ===\n", link);
|
|
|
|
if (!(link & SSUSB_DEV_SPEED_CHG_INTR))
|
|
return IRQ_NONE;
|
|
|
|
speed = SSUSB_DEV_SPEED(mtu3_readl(mbase, U3D_DEVICE_CONF));
|
|
|
|
switch (speed) {
|
|
case MTU3_SPEED_FULL:
|
|
udev_speed = USB_SPEED_FULL;
|
|
/*BESLCK = 4 < BESLCK_U3 = 10 < BESLDCK = 15 */
|
|
mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf)
|
|
| LPM_BESLCK(4) | LPM_BESLCK_U3(0xa));
|
|
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,
|
|
LPM_BESL_STALL | LPM_BESLD_STALL);
|
|
break;
|
|
case MTU3_SPEED_HIGH:
|
|
udev_speed = USB_SPEED_HIGH;
|
|
/*BESLCK = 4 < BESLCK_U3 = 10 < BESLDCK = 15 */
|
|
mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf)
|
|
| LPM_BESLCK(4) | LPM_BESLCK_U3(0xa));
|
|
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,
|
|
LPM_BESL_STALL | LPM_BESLD_STALL);
|
|
break;
|
|
case MTU3_SPEED_SUPER:
|
|
udev_speed = USB_SPEED_SUPER;
|
|
maxpkt = 512;
|
|
break;
|
|
case MTU3_SPEED_SUPER_PLUS:
|
|
udev_speed = USB_SPEED_SUPER_PLUS;
|
|
maxpkt = 512;
|
|
break;
|
|
default:
|
|
udev_speed = USB_SPEED_UNKNOWN;
|
|
break;
|
|
}
|
|
dev_dbg(mtu->dev, "%s: %s\n", __func__, usb_speed_string(udev_speed));
|
|
|
|
mtu->g.speed = udev_speed;
|
|
mtu->g.ep0->maxpacket = maxpkt;
|
|
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
|
|
|
|
if (udev_speed == USB_SPEED_UNKNOWN)
|
|
mtu3_gadget_disconnect(mtu);
|
|
else
|
|
mtu3_ep0_setup(mtu);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
u32 ltssm;
|
|
|
|
ltssm = mtu3_readl(mbase, U3D_LTSSM_INTR);
|
|
ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE);
|
|
mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm); /* W1C */
|
|
dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm);
|
|
|
|
if (ltssm & (HOT_RST_INTR | WARM_RST_INTR))
|
|
mtu3_gadget_reset(mtu);
|
|
|
|
if (ltssm & VBUS_FALL_INTR) {
|
|
mtu3_ss_func_set(mtu, false);
|
|
mtu3_gadget_reset(mtu);
|
|
}
|
|
|
|
if (ltssm & VBUS_RISE_INTR)
|
|
mtu3_ss_func_set(mtu, true);
|
|
|
|
if (ltssm & EXIT_U3_INTR)
|
|
mtu3_gadget_resume(mtu);
|
|
|
|
if (ltssm & ENTER_U3_INTR)
|
|
mtu3_gadget_suspend(mtu);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
|
|
{
|
|
void __iomem *mbase = mtu->mac_base;
|
|
u32 u2comm;
|
|
|
|
u2comm = mtu3_readl(mbase, U3D_COMMON_USB_INTR);
|
|
u2comm &= mtu3_readl(mbase, U3D_COMMON_USB_INTR_ENABLE);
|
|
mtu3_writel(mbase, U3D_COMMON_USB_INTR, u2comm); /* W1C */
|
|
dev_dbg(mtu->dev, "=== U2COMM[%x] ===\n", u2comm);
|
|
|
|
if (u2comm & SUSPEND_INTR)
|
|
mtu3_gadget_suspend(mtu);
|
|
|
|
if (u2comm & RESUME_INTR)
|
|
mtu3_gadget_resume(mtu);
|
|
|
|
if (u2comm & RESET_INTR)
|
|
mtu3_gadget_reset(mtu);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
irqreturn_t mtu3_irq(int irq, void *data)
|
|
{
|
|
struct mtu3 *mtu = (struct mtu3 *)data;
|
|
unsigned long flags;
|
|
u32 level1;
|
|
|
|
spin_lock_irqsave(&mtu->lock, flags);
|
|
|
|
/* U3D_LV1ISR is RU */
|
|
level1 = mtu3_readl(mtu->mac_base, U3D_LV1ISR);
|
|
level1 &= mtu3_readl(mtu->mac_base, U3D_LV1IER);
|
|
|
|
if (level1 & EP_CTRL_INTR)
|
|
mtu3_link_isr(mtu);
|
|
|
|
if (level1 & MAC2_INTR)
|
|
mtu3_u2_common_isr(mtu);
|
|
|
|
if (level1 & MAC3_INTR)
|
|
mtu3_u3_ltssm_isr(mtu);
|
|
|
|
if (level1 & BMU_INTR)
|
|
mtu3_ep0_isr(mtu);
|
|
|
|
if (level1 & QMU_INTR)
|
|
mtu3_qmu_isr(mtu);
|
|
|
|
spin_unlock_irqrestore(&mtu->lock, flags);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mtu3_check_params(struct mtu3 *mtu)
|
|
{
|
|
/* check the max_speed parameter */
|
|
switch (mtu->max_speed) {
|
|
case USB_SPEED_FULL:
|
|
case USB_SPEED_HIGH:
|
|
case USB_SPEED_SUPER:
|
|
case USB_SPEED_SUPER_PLUS:
|
|
break;
|
|
default:
|
|
dev_err(mtu->dev, "invalid max_speed: %d\n", mtu->max_speed);
|
|
/* fall through */
|
|
case USB_SPEED_UNKNOWN:
|
|
/* default as SS */
|
|
mtu->max_speed = USB_SPEED_SUPER;
|
|
break;
|
|
}
|
|
|
|
if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH))
|
|
mtu->max_speed = USB_SPEED_HIGH;
|
|
|
|
mtu->speed = mtu->max_speed;
|
|
|
|
dev_info(mtu->dev, "max_speed: %s\n", usb_speed_string(mtu->speed));
|
|
}
|
|
|
|
static int mtu3_hw_init(struct mtu3 *mtu)
|
|
{
|
|
u32 value;
|
|
int ret;
|
|
|
|
value = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_TRUNK_VERS);
|
|
mtu->hw_version = IP_TRUNK_VERS(value);
|
|
mtu->gen2cp = !!(mtu->hw_version >= MTU3_TRUNK_VERS_1003);
|
|
|
|
value = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP);
|
|
mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(value);
|
|
|
|
dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version,
|
|
mtu->is_u3_ip ? "U3" : "U2");
|
|
|
|
mtu3_check_params(mtu);
|
|
|
|
mtu3_device_reset(mtu);
|
|
|
|
ret = mtu3_device_enable(mtu);
|
|
if (ret) {
|
|
dev_err(mtu->dev, "device enable failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mtu3_mem_alloc(mtu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mtu3_regs_init(mtu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtu3_hw_exit(struct mtu3 *mtu)
|
|
{
|
|
mtu3_device_disable(mtu);
|
|
mtu3_mem_free(mtu);
|
|
}
|
|
|
|
int ssusb_gadget_init(struct ssusb_mtk *ssusb)
|
|
{
|
|
struct mtu3 *mtu = ssusb->u3d;
|
|
struct udevice *dev = mtu->dev;
|
|
int ret = -ENOMEM;
|
|
|
|
spin_lock_init(&mtu->lock);
|
|
mtu->ippc_base = ssusb->ippc_base;
|
|
mtu->mac_base = ssusb->mac_base;
|
|
mtu->ssusb = ssusb;
|
|
mtu->max_speed = usb_get_maximum_speed(dev_ofnode(dev));
|
|
mtu->force_vbus = dev_read_bool(dev, "mediatek,force-vbus");
|
|
|
|
ret = mtu3_hw_init(mtu);
|
|
if (ret) {
|
|
dev_err(dev, "mtu3 hw init failed:%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mtu3_gadget_setup(mtu);
|
|
if (ret) {
|
|
dev_err(dev, "mtu3 gadget init failed:%d\n", ret);
|
|
goto gadget_err;
|
|
}
|
|
|
|
dev_info(dev, "%s() done...\n", __func__);
|
|
|
|
return 0;
|
|
|
|
gadget_err:
|
|
mtu3_hw_exit(mtu);
|
|
ssusb->u3d = NULL;
|
|
dev_err(dev, "%s() fail...\n", __func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
|
|
{
|
|
struct mtu3 *mtu = ssusb->u3d;
|
|
|
|
mtu3_gadget_cleanup(mtu);
|
|
mtu3_hw_exit(mtu);
|
|
}
|