mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
44003f88a9
This driver does not use DM, so use log_xxx instead. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
319 lines
8 KiB
C
319 lines
8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/**
|
|
* ti_usb_phy.c - USB3 and USB3 PHY programming for dwc3
|
|
*
|
|
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
|
|
*
|
|
* Author: Kishon Vijay Abraham I <kishon@ti.com>
|
|
*
|
|
* Taken from Linux Kernel v3.16 (drivers/phy/phy-ti-pipe3.c and
|
|
* drivers/phy/phy-omap-usb2.c) and ported to uboot.
|
|
*
|
|
* "commit 56042e : phy: ti-pipe3: Fix suspend/resume and module reload" for
|
|
* phy-ti-pipe3.c
|
|
*
|
|
* "commit eb82a3 : phy: omap-usb2: Balance pm_runtime_enable() on probe failure
|
|
* and remove" for phy-omap-usb2.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <ti-usb-phy-uboot.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/devres.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioport.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <dm.h>
|
|
|
|
#include "linux-compat.h"
|
|
|
|
#define PLL_STATUS 0x00000004
|
|
#define PLL_GO 0x00000008
|
|
#define PLL_CONFIGURATION1 0x0000000C
|
|
#define PLL_CONFIGURATION2 0x00000010
|
|
#define PLL_CONFIGURATION3 0x00000014
|
|
#define PLL_CONFIGURATION4 0x00000020
|
|
|
|
#define PLL_REGM_MASK 0x001FFE00
|
|
#define PLL_REGM_SHIFT 0x9
|
|
#define PLL_REGM_F_MASK 0x0003FFFF
|
|
#define PLL_REGM_F_SHIFT 0x0
|
|
#define PLL_REGN_MASK 0x000001FE
|
|
#define PLL_REGN_SHIFT 0x1
|
|
#define PLL_SELFREQDCO_MASK 0x0000000E
|
|
#define PLL_SELFREQDCO_SHIFT 0x1
|
|
#define PLL_SD_MASK 0x0003FC00
|
|
#define PLL_SD_SHIFT 10
|
|
#define SET_PLL_GO 0x1
|
|
#define PLL_LDOPWDN BIT(15)
|
|
#define PLL_TICOPWDN BIT(16)
|
|
#define PLL_LOCK 0x2
|
|
#define PLL_IDLE 0x1
|
|
|
|
#define OMAP_CTRL_DEV_PHY_PD BIT(0)
|
|
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
|
|
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
|
|
|
|
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
|
|
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
|
|
|
|
#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3
|
|
#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0
|
|
|
|
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
|
|
|
|
#define AM437X_CTRL_USB2_PHY_PD BIT(0)
|
|
#define AM437X_CTRL_USB2_OTG_PD BIT(1)
|
|
#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
|
|
#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
|
|
|
|
static LIST_HEAD(ti_usb_phy_list);
|
|
typedef unsigned int u32;
|
|
|
|
struct usb3_dpll_params {
|
|
u16 m;
|
|
u8 n;
|
|
u8 freq:3;
|
|
u8 sd;
|
|
u32 mf;
|
|
};
|
|
|
|
struct usb3_dpll_map {
|
|
unsigned long rate;
|
|
struct usb3_dpll_params params;
|
|
struct usb3_dpll_map *dpll_map;
|
|
};
|
|
|
|
struct ti_usb_phy {
|
|
void __iomem *pll_ctrl_base;
|
|
void __iomem *usb2_phy_power;
|
|
void __iomem *usb3_phy_power;
|
|
struct usb3_dpll_map *dpll_map;
|
|
struct list_head list;
|
|
int index;
|
|
};
|
|
|
|
static struct usb3_dpll_map dpll_map_usb[] = {
|
|
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
|
|
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
|
|
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
|
|
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
|
|
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
|
|
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
|
|
{ }, /* Terminator */
|
|
};
|
|
|
|
static inline unsigned int ti_usb3_readl(void __iomem *base, u32 offset)
|
|
{
|
|
return readl(base + offset);
|
|
}
|
|
|
|
static inline void ti_usb3_writel(void __iomem *base, u32 offset, u32 value)
|
|
{
|
|
writel(value, base + offset);
|
|
}
|
|
|
|
#ifndef CONFIG_AM43XX
|
|
static struct usb3_dpll_params *ti_usb3_get_dpll_params(struct ti_usb_phy *phy)
|
|
{
|
|
unsigned long rate;
|
|
struct usb3_dpll_map *dpll_map = phy->dpll_map;
|
|
|
|
rate = get_sys_clk_freq();
|
|
|
|
for (; dpll_map->rate; dpll_map++) {
|
|
if (rate == dpll_map->rate)
|
|
return &dpll_map->params;
|
|
}
|
|
|
|
log_err("No DPLL configuration for %lu Hz SYS CLK\n", rate);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int ti_usb3_dpll_wait_lock(struct ti_usb_phy *phy)
|
|
{
|
|
u32 val;
|
|
do {
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_STATUS);
|
|
if (val & PLL_LOCK)
|
|
break;
|
|
} while (1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_usb3_dpll_program(struct ti_usb_phy *phy)
|
|
{
|
|
u32 val;
|
|
struct usb3_dpll_params *dpll_params;
|
|
|
|
if (!phy->pll_ctrl_base)
|
|
return -EINVAL;
|
|
|
|
dpll_params = ti_usb3_get_dpll_params(phy);
|
|
if (!dpll_params)
|
|
return -EINVAL;
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
|
|
val &= ~PLL_REGN_MASK;
|
|
val |= dpll_params->n << PLL_REGN_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
|
|
val &= ~PLL_SELFREQDCO_MASK;
|
|
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
|
|
val &= ~PLL_REGM_MASK;
|
|
val |= dpll_params->m << PLL_REGM_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
|
|
val &= ~PLL_REGM_F_MASK;
|
|
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
|
|
val &= ~PLL_SD_MASK;
|
|
val |= dpll_params->sd << PLL_SD_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
|
|
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
|
|
|
|
return ti_usb3_dpll_wait_lock(phy);
|
|
}
|
|
#endif
|
|
|
|
void ti_usb2_phy_power(struct ti_usb_phy *phy, int on)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(phy->usb2_phy_power);
|
|
|
|
if (on) {
|
|
#if defined(CONFIG_DRA7XX)
|
|
if (phy->index == 1)
|
|
val &= ~OMAP_CTRL_USB2_PHY_PD;
|
|
else
|
|
val &= ~OMAP_CTRL_DEV_PHY_PD;
|
|
#elif defined(CONFIG_AM43XX)
|
|
val &= ~(AM437X_CTRL_USB2_PHY_PD |
|
|
AM437X_CTRL_USB2_OTG_PD);
|
|
val |= (AM437X_CTRL_USB2_OTGVDET_EN |
|
|
AM437X_CTRL_USB2_OTGSESSEND_EN);
|
|
#endif
|
|
} else {
|
|
#if defined(CONFIG_DRA7XX)
|
|
if (phy->index == 1)
|
|
val |= OMAP_CTRL_USB2_PHY_PD;
|
|
else
|
|
val |= OMAP_CTRL_DEV_PHY_PD;
|
|
|
|
#elif defined(CONFIG_AM43XX)
|
|
val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
|
|
AM437X_CTRL_USB2_OTGSESSEND_EN);
|
|
val |= (AM437X_CTRL_USB2_PHY_PD |
|
|
AM437X_CTRL_USB2_OTG_PD);
|
|
#endif
|
|
}
|
|
writel(val, phy->usb2_phy_power);
|
|
}
|
|
|
|
#ifndef CONFIG_AM43XX
|
|
void ti_usb3_phy_power(struct ti_usb_phy *phy, int on)
|
|
{
|
|
u32 val;
|
|
u32 rate;
|
|
rate = get_sys_clk_freq();
|
|
rate = rate/1000000;
|
|
|
|
if (!phy->usb3_phy_power)
|
|
return;
|
|
|
|
val = readl(phy->usb3_phy_power);
|
|
if (on) {
|
|
val &= ~(OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK |
|
|
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_MASK);
|
|
val |= (OMAP_CTRL_USB3_PHY_TX_RX_POWERON) <<
|
|
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
|
val |= rate <<
|
|
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_SHIFT;
|
|
} else {
|
|
val &= ~OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK;
|
|
val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
|
|
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
|
}
|
|
writel(val, phy->usb3_phy_power);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* ti_usb_phy_uboot_init - usb phy uboot initialization code
|
|
* @dev: struct ti_usb_phy_device containing initialization data
|
|
*
|
|
* Entry point for ti usb phy driver. This driver handles initialization
|
|
* of both usb2 phy and usb3 phy. Pointer to ti_usb_phy_device should be
|
|
* passed containing base address and other initialization data.
|
|
* Returns '0' on success and a negative value on failure.
|
|
*
|
|
* Generally called from board_usb_init() implemented in board file.
|
|
*/
|
|
int ti_usb_phy_uboot_init(struct ti_usb_phy_device *dev)
|
|
{
|
|
struct ti_usb_phy *phy;
|
|
|
|
phy = devm_kzalloc(NULL, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy) {
|
|
log_err("unable to alloc mem for TI USB3 PHY\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
phy->dpll_map = dpll_map_usb;
|
|
phy->index = dev->index;
|
|
phy->pll_ctrl_base = dev->pll_ctrl_base;
|
|
phy->usb2_phy_power = dev->usb2_phy_power;
|
|
phy->usb3_phy_power = dev->usb3_phy_power;
|
|
|
|
#ifndef CONFIG_AM43XX
|
|
ti_usb3_dpll_program(phy);
|
|
ti_usb3_phy_power(phy, 1);
|
|
#endif
|
|
ti_usb2_phy_power(phy, 1);
|
|
mdelay(150);
|
|
list_add_tail(&phy->list, &ti_usb_phy_list);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ti_usb_phy_uboot_exit - usb phy uboot cleanup code
|
|
* @index: index of this controller
|
|
*
|
|
* Performs cleanup of memory allocated in ti_usb_phy_uboot_init.
|
|
* index of _this_ controller should be passed and should match with
|
|
* the index passed in ti_usb_phy_device during init.
|
|
*
|
|
* Generally called from board file.
|
|
*/
|
|
void ti_usb_phy_uboot_exit(int index)
|
|
{
|
|
struct ti_usb_phy *phy = NULL;
|
|
|
|
list_for_each_entry(phy, &ti_usb_phy_list, list) {
|
|
if (phy->index != index)
|
|
continue;
|
|
|
|
ti_usb2_phy_power(phy, 0);
|
|
#ifndef CONFIG_AM43XX
|
|
ti_usb3_phy_power(phy, 0);
|
|
#endif
|
|
list_del(&phy->list);
|
|
kfree(phy);
|
|
break;
|
|
}
|
|
}
|