mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
df5eabcbf7
This logs with the device from struct dwc3. Some files also need to include dm.h so fields in udevice can be accessed. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
1115 lines
26 KiB
C
1115 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/**
|
|
* ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
|
|
*
|
|
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
|
|
*
|
|
* Authors: Felipe Balbi <balbi@ti.com>,
|
|
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
*
|
|
* Taken from Linux Kernel v3.19-rc1 (drivers/usb/dwc3/ep0.c) and ported
|
|
* to uboot.
|
|
*
|
|
* commit c00552ebaf : Merge 3.18-rc7 into usb-next
|
|
*/
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/composite.h>
|
|
|
|
#include "core.h"
|
|
#include "gadget.h"
|
|
#include "io.h"
|
|
|
|
#include "linux-compat.h"
|
|
|
|
static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
|
|
static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
|
|
struct dwc3_ep *dep, struct dwc3_request *req);
|
|
|
|
static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
|
|
{
|
|
switch (state) {
|
|
case EP0_UNCONNECTED:
|
|
return "Unconnected";
|
|
case EP0_SETUP_PHASE:
|
|
return "Setup Phase";
|
|
case EP0_DATA_PHASE:
|
|
return "Data Phase";
|
|
case EP0_STATUS_PHASE:
|
|
return "Status Phase";
|
|
default:
|
|
return "UNKNOWN";
|
|
}
|
|
}
|
|
|
|
static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
|
|
u32 len, u32 type, unsigned chain)
|
|
{
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
struct dwc3_trb *trb;
|
|
struct dwc3_ep *dep;
|
|
|
|
int ret;
|
|
|
|
dep = dwc->eps[epnum];
|
|
if (dep->flags & DWC3_EP_BUSY) {
|
|
dev_vdbg(dwc->dev, "%s still busy", dep->name);
|
|
return 0;
|
|
}
|
|
|
|
trb = &dwc->ep0_trb[dep->free_slot];
|
|
|
|
if (chain)
|
|
dep->free_slot++;
|
|
|
|
trb->bpl = lower_32_bits(buf_dma);
|
|
trb->bph = upper_32_bits(buf_dma);
|
|
trb->size = len;
|
|
trb->ctrl = type;
|
|
|
|
trb->ctrl |= (DWC3_TRB_CTRL_HWO
|
|
| DWC3_TRB_CTRL_ISP_IMI);
|
|
|
|
if (chain)
|
|
trb->ctrl |= DWC3_TRB_CTRL_CHN;
|
|
else
|
|
trb->ctrl |= (DWC3_TRB_CTRL_IOC
|
|
| DWC3_TRB_CTRL_LST);
|
|
|
|
dwc3_flush_cache((uintptr_t)buf_dma, len);
|
|
dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
|
|
|
|
if (chain)
|
|
return 0;
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
params.param0 = upper_32_bits(dwc->ep0_trb_addr);
|
|
params.param1 = lower_32_bits(dwc->ep0_trb_addr);
|
|
|
|
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
|
|
DWC3_DEPCMD_STARTTRANSFER, ¶ms);
|
|
if (ret < 0) {
|
|
dev_dbg(dwc->dev, "%s STARTTRANSFER failed", dep->name);
|
|
return ret;
|
|
}
|
|
|
|
dep->flags |= DWC3_EP_BUSY;
|
|
dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
|
|
dep->number);
|
|
|
|
dwc->ep0_next_event = DWC3_EP0_COMPLETE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
|
|
struct dwc3_request *req)
|
|
{
|
|
struct dwc3 *dwc = dep->dwc;
|
|
|
|
req->request.actual = 0;
|
|
req->request.status = -EINPROGRESS;
|
|
req->epnum = dep->number;
|
|
|
|
list_add_tail(&req->list, &dep->request_list);
|
|
|
|
/*
|
|
* Gadget driver might not be quick enough to queue a request
|
|
* before we get a Transfer Not Ready event on this endpoint.
|
|
*
|
|
* In that case, we will set DWC3_EP_PENDING_REQUEST. When that
|
|
* flag is set, it's telling us that as soon as Gadget queues the
|
|
* required request, we should kick the transfer here because the
|
|
* IRQ we were waiting for is long gone.
|
|
*/
|
|
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
|
|
unsigned direction;
|
|
|
|
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
|
|
|
|
if (dwc->ep0state != EP0_DATA_PHASE) {
|
|
dev_WARN(dwc->dev, "Unexpected pending request\n");
|
|
return 0;
|
|
}
|
|
|
|
__dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
|
|
|
|
dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
|
|
DWC3_EP0_DIR_IN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* In case gadget driver asked us to delay the STATUS phase,
|
|
* handle it here.
|
|
*/
|
|
if (dwc->delayed_status) {
|
|
unsigned direction;
|
|
|
|
direction = !dwc->ep0_expect_in;
|
|
dwc->delayed_status = false;
|
|
usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED);
|
|
|
|
if (dwc->ep0state == EP0_STATUS_PHASE)
|
|
__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
|
|
else
|
|
dev_dbg(dwc->dev, "too early for delayed status");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Unfortunately we have uncovered a limitation wrt the Data Phase.
|
|
*
|
|
* Section 9.4 says we can wait for the XferNotReady(DATA) event to
|
|
* come before issueing Start Transfer command, but if we do, we will
|
|
* miss situations where the host starts another SETUP phase instead of
|
|
* the DATA phase. Such cases happen at least on TD.7.6 of the Link
|
|
* Layer Compliance Suite.
|
|
*
|
|
* The problem surfaces due to the fact that in case of back-to-back
|
|
* SETUP packets there will be no XferNotReady(DATA) generated and we
|
|
* will be stuck waiting for XferNotReady(DATA) forever.
|
|
*
|
|
* By looking at tables 9-13 and 9-14 of the Databook, we can see that
|
|
* it tells us to start Data Phase right away. It also mentions that if
|
|
* we receive a SETUP phase instead of the DATA phase, core will issue
|
|
* XferComplete for the DATA phase, before actually initiating it in
|
|
* the wire, with the TRB's status set to "SETUP_PENDING". Such status
|
|
* can only be used to print some debugging logs, as the core expects
|
|
* us to go through to the STATUS phase and start a CONTROL_STATUS TRB,
|
|
* just so it completes right away, without transferring anything and,
|
|
* only then, we can go back to the SETUP phase.
|
|
*
|
|
* Because of this scenario, SNPS decided to change the programming
|
|
* model of control transfers and support on-demand transfers only for
|
|
* the STATUS phase. To fix the issue we have now, we will always wait
|
|
* for gadget driver to queue the DATA phase's struct usb_request, then
|
|
* start it right away.
|
|
*
|
|
* If we're actually in a 2-stage transfer, we will wait for
|
|
* XferNotReady(STATUS).
|
|
*/
|
|
if (dwc->three_stage_setup) {
|
|
unsigned direction;
|
|
|
|
direction = dwc->ep0_expect_in;
|
|
dwc->ep0state = EP0_DATA_PHASE;
|
|
|
|
__dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
|
|
|
|
dep->flags &= ~DWC3_EP0_DIR_IN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct dwc3_request *req = to_dwc3_request(request);
|
|
struct dwc3_ep *dep = to_dwc3_ep(ep);
|
|
struct dwc3 *dwc = dep->dwc;
|
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
if (!dep->endpoint.desc) {
|
|
dev_dbg(dwc->dev, "trying to queue request %p to disabled %s",
|
|
request, dep->name);
|
|
ret = -ESHUTDOWN;
|
|
goto out;
|
|
}
|
|
|
|
/* we share one TRB for ep0/1 */
|
|
if (!list_empty(&dep->request_list)) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
dev_vdbg(dwc->dev, "queueing request %p to %s length %d state '%s'",
|
|
request, dep->name, request->length,
|
|
dwc3_ep0_state_string(dwc->ep0state));
|
|
|
|
ret = __dwc3_gadget_ep0_queue(dep, req);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
|
|
/* reinitialize physical ep1 */
|
|
dep = dwc->eps[1];
|
|
dep->flags = DWC3_EP_ENABLED;
|
|
|
|
/* stall is always issued on EP0 */
|
|
dep = dwc->eps[0];
|
|
__dwc3_gadget_ep_set_halt(dep, 1, false);
|
|
dep->flags = DWC3_EP_ENABLED;
|
|
dwc->delayed_status = false;
|
|
|
|
if (!list_empty(&dep->request_list)) {
|
|
struct dwc3_request *req;
|
|
|
|
req = next_request(&dep->request_list);
|
|
dwc3_gadget_giveback(dep, req, -ECONNRESET);
|
|
}
|
|
|
|
dwc->ep0state = EP0_SETUP_PHASE;
|
|
dwc3_ep0_out_start(dwc);
|
|
}
|
|
|
|
int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
|
|
{
|
|
struct dwc3_ep *dep = to_dwc3_ep(ep);
|
|
struct dwc3 *dwc = dep->dwc;
|
|
|
|
dwc3_ep0_stall_and_restart(dwc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
|
|
{
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&dwc->lock, flags);
|
|
ret = __dwc3_gadget_ep0_set_halt(ep, value);
|
|
spin_unlock_irqrestore(&dwc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void dwc3_ep0_out_start(struct dwc3 *dwc)
|
|
{
|
|
int ret;
|
|
|
|
ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
|
|
DWC3_TRBCTL_CONTROL_SETUP, 0);
|
|
WARN_ON(ret < 0);
|
|
}
|
|
|
|
static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
u32 windex = le16_to_cpu(wIndex_le);
|
|
u32 epnum;
|
|
|
|
epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
|
|
if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
|
|
epnum |= 1;
|
|
|
|
dep = dwc->eps[epnum];
|
|
if (dep->flags & DWC3_EP_ENABLED)
|
|
return dep;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
}
|
|
/*
|
|
* ch 9.4.5
|
|
*/
|
|
static int dwc3_ep0_handle_status(struct dwc3 *dwc,
|
|
struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
u32 recip;
|
|
u32 reg;
|
|
u16 usb_status = 0;
|
|
__le16 *response_pkt;
|
|
|
|
recip = ctrl->bRequestType & USB_RECIP_MASK;
|
|
switch (recip) {
|
|
case USB_RECIP_DEVICE:
|
|
/*
|
|
* LTM will be set once we know how to set this in HW.
|
|
*/
|
|
usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED;
|
|
|
|
if (dwc->speed == DWC3_DSTS_SUPERSPEED) {
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
if (reg & DWC3_DCTL_INITU1ENA)
|
|
usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
|
|
if (reg & DWC3_DCTL_INITU2ENA)
|
|
usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
|
|
}
|
|
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
/*
|
|
* Function Remote Wake Capable D0
|
|
* Function Remote Wakeup D1
|
|
*/
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT:
|
|
dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
|
|
if (!dep)
|
|
return -EINVAL;
|
|
|
|
if (dep->flags & DWC3_EP_STALL)
|
|
usb_status = 1 << USB_ENDPOINT_HALT;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
response_pkt = (__le16 *) dwc->setup_buf;
|
|
*response_pkt = cpu_to_le16(usb_status);
|
|
|
|
dep = dwc->eps[0];
|
|
dwc->ep0_usb_req.dep = dep;
|
|
dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
|
|
dwc->ep0_usb_req.request.buf = dwc->setup_buf;
|
|
dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
|
|
|
|
return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
|
|
}
|
|
|
|
static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
|
|
struct usb_ctrlrequest *ctrl, int set)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
u32 recip;
|
|
u32 wValue;
|
|
u32 wIndex;
|
|
u32 reg;
|
|
int ret;
|
|
enum usb_device_state state;
|
|
|
|
wValue = le16_to_cpu(ctrl->wValue);
|
|
wIndex = le16_to_cpu(ctrl->wIndex);
|
|
recip = ctrl->bRequestType & USB_RECIP_MASK;
|
|
state = dwc->gadget.state;
|
|
|
|
switch (recip) {
|
|
case USB_RECIP_DEVICE:
|
|
|
|
switch (wValue) {
|
|
case USB_DEVICE_REMOTE_WAKEUP:
|
|
break;
|
|
/*
|
|
* 9.4.1 says only only for SS, in AddressState only for
|
|
* default control pipe
|
|
*/
|
|
case USB_DEVICE_U1_ENABLE:
|
|
if (state != USB_STATE_CONFIGURED)
|
|
return -EINVAL;
|
|
if (dwc->speed != DWC3_DSTS_SUPERSPEED)
|
|
return -EINVAL;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
if (set)
|
|
reg |= DWC3_DCTL_INITU1ENA;
|
|
else
|
|
reg &= ~DWC3_DCTL_INITU1ENA;
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
break;
|
|
|
|
case USB_DEVICE_U2_ENABLE:
|
|
if (state != USB_STATE_CONFIGURED)
|
|
return -EINVAL;
|
|
if (dwc->speed != DWC3_DSTS_SUPERSPEED)
|
|
return -EINVAL;
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
if (set)
|
|
reg |= DWC3_DCTL_INITU2ENA;
|
|
else
|
|
reg &= ~DWC3_DCTL_INITU2ENA;
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
break;
|
|
|
|
case USB_DEVICE_LTM_ENABLE:
|
|
return -EINVAL;
|
|
|
|
case USB_DEVICE_TEST_MODE:
|
|
if ((wIndex & 0xff) != 0)
|
|
return -EINVAL;
|
|
if (!set)
|
|
return -EINVAL;
|
|
|
|
dwc->test_mode_nr = wIndex >> 8;
|
|
dwc->test_mode = true;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
switch (wValue) {
|
|
case USB_INTRF_FUNC_SUSPEND:
|
|
if (wIndex & USB_INTRF_FUNC_SUSPEND_LP)
|
|
/* XXX enable Low power suspend */
|
|
;
|
|
if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
|
|
/* XXX enable remote wakeup */
|
|
;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT:
|
|
switch (wValue) {
|
|
case USB_ENDPOINT_HALT:
|
|
dep = dwc3_wIndex_to_dep(dwc, wIndex);
|
|
if (!dep)
|
|
return -EINVAL;
|
|
if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
|
|
break;
|
|
ret = __dwc3_gadget_ep_set_halt(dep, set, true);
|
|
if (ret)
|
|
return -EINVAL;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
|
|
{
|
|
enum usb_device_state state = dwc->gadget.state;
|
|
u32 addr;
|
|
u32 reg;
|
|
|
|
addr = le16_to_cpu(ctrl->wValue);
|
|
if (addr > 127) {
|
|
dev_dbg(dwc->dev, "invalid device address %d", addr);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state == USB_STATE_CONFIGURED) {
|
|
dev_dbg(dwc->dev, "trying to set address when configured");
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
|
|
reg &= ~(DWC3_DCFG_DEVADDR_MASK);
|
|
reg |= DWC3_DCFG_DEVADDR(addr);
|
|
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
|
|
|
|
if (addr)
|
|
usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
|
|
else
|
|
usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
|
|
{
|
|
int ret;
|
|
|
|
spin_unlock(&dwc->lock);
|
|
ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
|
|
spin_lock(&dwc->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
|
|
{
|
|
enum usb_device_state state = dwc->gadget.state;
|
|
u32 cfg;
|
|
int ret;
|
|
u32 reg;
|
|
|
|
dwc->start_config_issued = false;
|
|
cfg = le16_to_cpu(ctrl->wValue);
|
|
|
|
switch (state) {
|
|
case USB_STATE_DEFAULT:
|
|
return -EINVAL;
|
|
|
|
case USB_STATE_ADDRESS:
|
|
ret = dwc3_ep0_delegate_req(dwc, ctrl);
|
|
/* if the cfg matches and the cfg is non zero */
|
|
if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
|
|
|
|
/*
|
|
* only change state if set_config has already
|
|
* been processed. If gadget driver returns
|
|
* USB_GADGET_DELAYED_STATUS, we will wait
|
|
* to change the state on the next usb_ep_queue()
|
|
*/
|
|
if (ret == 0)
|
|
usb_gadget_set_state(&dwc->gadget,
|
|
USB_STATE_CONFIGURED);
|
|
|
|
/*
|
|
* Enable transition to U1/U2 state when
|
|
* nothing is pending from application.
|
|
*/
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
|
|
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
|
|
|
|
dwc->resize_fifos = true;
|
|
dev_dbg(dwc->dev, "resize FIFOs flag SET");
|
|
}
|
|
break;
|
|
|
|
case USB_STATE_CONFIGURED:
|
|
ret = dwc3_ep0_delegate_req(dwc, ctrl);
|
|
if (!cfg && !ret)
|
|
usb_gadget_set_state(&dwc->gadget,
|
|
USB_STATE_ADDRESS);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct dwc3_ep *dep = to_dwc3_ep(ep);
|
|
struct dwc3 *dwc = dep->dwc;
|
|
|
|
u32 param = 0;
|
|
u32 reg;
|
|
|
|
struct timing {
|
|
u8 u1sel;
|
|
u8 u1pel;
|
|
u16 u2sel;
|
|
u16 u2pel;
|
|
} __packed timing;
|
|
|
|
int ret;
|
|
|
|
memcpy(&timing, req->buf, sizeof(timing));
|
|
|
|
dwc->u1sel = timing.u1sel;
|
|
dwc->u1pel = timing.u1pel;
|
|
dwc->u2sel = le16_to_cpu(timing.u2sel);
|
|
dwc->u2pel = le16_to_cpu(timing.u2pel);
|
|
|
|
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
|
|
if (reg & DWC3_DCTL_INITU2ENA)
|
|
param = dwc->u2pel;
|
|
if (reg & DWC3_DCTL_INITU1ENA)
|
|
param = dwc->u1pel;
|
|
|
|
/*
|
|
* According to Synopsys Databook, if parameter is
|
|
* greater than 125, a value of zero should be
|
|
* programmed in the register.
|
|
*/
|
|
if (param > 125)
|
|
param = 0;
|
|
|
|
/* now that we have the time, issue DGCMD Set Sel */
|
|
ret = dwc3_send_gadget_generic_command(dwc,
|
|
DWC3_DGCMD_SET_PERIODIC_PAR, param);
|
|
WARN_ON(ret < 0);
|
|
}
|
|
|
|
static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct dwc3_ep *dep;
|
|
enum usb_device_state state = dwc->gadget.state;
|
|
u16 wLength;
|
|
|
|
if (state == USB_STATE_DEFAULT)
|
|
return -EINVAL;
|
|
|
|
wLength = le16_to_cpu(ctrl->wLength);
|
|
|
|
if (wLength != 6) {
|
|
dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
|
|
wLength);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* To handle Set SEL we need to receive 6 bytes from Host. So let's
|
|
* queue a usb_request for 6 bytes.
|
|
*
|
|
* Remember, though, this controller can't handle non-wMaxPacketSize
|
|
* aligned transfers on the OUT direction, so we queue a request for
|
|
* wMaxPacketSize instead.
|
|
*/
|
|
dep = dwc->eps[0];
|
|
dwc->ep0_usb_req.dep = dep;
|
|
dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
|
|
dwc->ep0_usb_req.request.buf = dwc->setup_buf;
|
|
dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
|
|
|
|
return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
|
|
}
|
|
|
|
static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
|
|
{
|
|
u16 wLength;
|
|
u16 wValue;
|
|
u16 wIndex;
|
|
|
|
wValue = le16_to_cpu(ctrl->wValue);
|
|
wLength = le16_to_cpu(ctrl->wLength);
|
|
wIndex = le16_to_cpu(ctrl->wIndex);
|
|
|
|
if (wIndex || wLength)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* REVISIT It's unclear from Databook what to do with this
|
|
* value. For now, just cache it.
|
|
*/
|
|
dwc->isoch_delay = wValue;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
|
|
{
|
|
int ret;
|
|
|
|
switch (ctrl->bRequest) {
|
|
case USB_REQ_GET_STATUS:
|
|
dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS");
|
|
ret = dwc3_ep0_handle_status(dwc, ctrl);
|
|
break;
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE");
|
|
ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
|
|
break;
|
|
case USB_REQ_SET_FEATURE:
|
|
dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE");
|
|
ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
|
|
break;
|
|
case USB_REQ_SET_ADDRESS:
|
|
dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS");
|
|
ret = dwc3_ep0_set_address(dwc, ctrl);
|
|
break;
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION");
|
|
ret = dwc3_ep0_set_config(dwc, ctrl);
|
|
break;
|
|
case USB_REQ_SET_SEL:
|
|
dev_vdbg(dwc->dev, "USB_REQ_SET_SEL");
|
|
ret = dwc3_ep0_set_sel(dwc, ctrl);
|
|
break;
|
|
case USB_REQ_SET_ISOCH_DELAY:
|
|
dev_vdbg(dwc->dev, "USB_REQ_SET_ISOCH_DELAY");
|
|
ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
|
|
break;
|
|
default:
|
|
dev_vdbg(dwc->dev, "Forwarding to gadget driver");
|
|
ret = dwc3_ep0_delegate_req(dwc, ctrl);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
|
|
const struct dwc3_event_depevt *event)
|
|
{
|
|
struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
|
|
int ret = -EINVAL;
|
|
u32 len;
|
|
|
|
if (!dwc->gadget_driver)
|
|
goto out;
|
|
|
|
len = le16_to_cpu(ctrl->wLength);
|
|
if (!len) {
|
|
dwc->three_stage_setup = false;
|
|
dwc->ep0_expect_in = false;
|
|
dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
|
|
} else {
|
|
dwc->three_stage_setup = true;
|
|
dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
|
|
dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
|
|
}
|
|
|
|
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
|
|
ret = dwc3_ep0_std_request(dwc, ctrl);
|
|
else
|
|
ret = dwc3_ep0_delegate_req(dwc, ctrl);
|
|
|
|
if (ret == USB_GADGET_DELAYED_STATUS)
|
|
dwc->delayed_status = true;
|
|
|
|
out:
|
|
if (ret < 0)
|
|
dwc3_ep0_stall_and_restart(dwc);
|
|
}
|
|
|
|
static void dwc3_ep0_complete_data(struct dwc3 *dwc,
|
|
const struct dwc3_event_depevt *event)
|
|
{
|
|
struct dwc3_request *r = NULL;
|
|
struct usb_request *ur;
|
|
struct dwc3_trb *trb;
|
|
struct dwc3_ep *ep0;
|
|
unsigned transfer_size = 0;
|
|
unsigned maxp;
|
|
void *buf;
|
|
u32 transferred = 0;
|
|
u32 status;
|
|
u32 length;
|
|
u8 epnum;
|
|
|
|
epnum = event->endpoint_number;
|
|
ep0 = dwc->eps[0];
|
|
|
|
dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
|
|
|
|
trb = dwc->ep0_trb;
|
|
|
|
r = next_request(&ep0->request_list);
|
|
if (!r)
|
|
return;
|
|
|
|
dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
|
|
|
|
status = DWC3_TRB_SIZE_TRBSTS(trb->size);
|
|
if (status == DWC3_TRBSTS_SETUP_PENDING) {
|
|
dev_dbg(dwc->dev, "Setup Pending received");
|
|
|
|
if (r)
|
|
dwc3_gadget_giveback(ep0, r, -ECONNRESET);
|
|
|
|
return;
|
|
}
|
|
|
|
ur = &r->request;
|
|
buf = ur->buf;
|
|
|
|
length = trb->size & DWC3_TRB_SIZE_MASK;
|
|
|
|
maxp = ep0->endpoint.maxpacket;
|
|
|
|
if (dwc->ep0_bounced) {
|
|
/*
|
|
* Handle the first TRB before handling the bounce buffer if
|
|
* the request length is greater than the bounce buffer size.
|
|
*/
|
|
if (ur->length > DWC3_EP0_BOUNCE_SIZE) {
|
|
transfer_size = (ur->length / maxp) * maxp;
|
|
transferred = transfer_size - length;
|
|
buf = (u8 *)buf + transferred;
|
|
ur->actual += transferred;
|
|
|
|
trb++;
|
|
dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
|
|
length = trb->size & DWC3_TRB_SIZE_MASK;
|
|
|
|
ep0->free_slot = 0;
|
|
}
|
|
|
|
transfer_size = roundup((ur->length - transfer_size),
|
|
maxp);
|
|
transferred = min_t(u32, ur->length - transferred,
|
|
transfer_size - length);
|
|
dwc3_flush_cache((uintptr_t)dwc->ep0_bounce, DWC3_EP0_BOUNCE_SIZE);
|
|
memcpy(buf, dwc->ep0_bounce, transferred);
|
|
} else {
|
|
transferred = ur->length - length;
|
|
}
|
|
|
|
ur->actual += transferred;
|
|
|
|
if ((epnum & 1) && ur->actual < ur->length) {
|
|
/* for some reason we did not get everything out */
|
|
|
|
dwc3_ep0_stall_and_restart(dwc);
|
|
} else {
|
|
dwc3_gadget_giveback(ep0, r, 0);
|
|
|
|
if (IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
|
|
ur->length && ur->zero) {
|
|
int ret;
|
|
|
|
dwc->ep0_next_event = DWC3_EP0_COMPLETE;
|
|
|
|
ret = dwc3_ep0_start_trans(dwc, epnum,
|
|
dwc->ctrl_req_addr, 0,
|
|
DWC3_TRBCTL_CONTROL_DATA, 0);
|
|
WARN_ON(ret < 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dwc3_ep0_complete_status(struct dwc3 *dwc,
|
|
const struct dwc3_event_depevt *event)
|
|
{
|
|
struct dwc3_request *r;
|
|
struct dwc3_ep *dep;
|
|
struct dwc3_trb *trb;
|
|
u32 status;
|
|
|
|
dep = dwc->eps[0];
|
|
trb = dwc->ep0_trb;
|
|
|
|
if (!list_empty(&dep->request_list)) {
|
|
r = next_request(&dep->request_list);
|
|
|
|
dwc3_gadget_giveback(dep, r, 0);
|
|
}
|
|
|
|
if (dwc->test_mode) {
|
|
int ret;
|
|
|
|
ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
|
|
if (ret < 0) {
|
|
dev_dbg(dwc->dev, "Invalid Test #%d",
|
|
dwc->test_mode_nr);
|
|
dwc3_ep0_stall_and_restart(dwc);
|
|
return;
|
|
}
|
|
}
|
|
|
|
status = DWC3_TRB_SIZE_TRBSTS(trb->size);
|
|
if (status == DWC3_TRBSTS_SETUP_PENDING)
|
|
dev_dbg(dwc->dev, "Setup Pending received");
|
|
|
|
dwc->ep0state = EP0_SETUP_PHASE;
|
|
dwc3_ep0_out_start(dwc);
|
|
}
|
|
|
|
static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
|
|
const struct dwc3_event_depevt *event)
|
|
{
|
|
struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
|
|
|
|
dep->flags &= ~DWC3_EP_BUSY;
|
|
dep->resource_index = 0;
|
|
dwc->setup_packet_pending = false;
|
|
|
|
switch (dwc->ep0state) {
|
|
case EP0_SETUP_PHASE:
|
|
dev_vdbg(dwc->dev, "Setup Phase");
|
|
dwc3_ep0_inspect_setup(dwc, event);
|
|
break;
|
|
|
|
case EP0_DATA_PHASE:
|
|
dev_vdbg(dwc->dev, "Data Phase");
|
|
dwc3_ep0_complete_data(dwc, event);
|
|
break;
|
|
|
|
case EP0_STATUS_PHASE:
|
|
dev_vdbg(dwc->dev, "Status Phase");
|
|
dwc3_ep0_complete_status(dwc, event);
|
|
break;
|
|
default:
|
|
WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
|
|
}
|
|
}
|
|
|
|
static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
|
|
struct dwc3_ep *dep, struct dwc3_request *req)
|
|
{
|
|
int ret;
|
|
|
|
req->direction = !!dep->number;
|
|
|
|
if (req->request.length == 0) {
|
|
ret = dwc3_ep0_start_trans(dwc, dep->number,
|
|
dwc->ctrl_req_addr, 0,
|
|
DWC3_TRBCTL_CONTROL_DATA, 0);
|
|
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) &&
|
|
(dep->number == 0)) {
|
|
u32 transfer_size = 0;
|
|
u32 maxpacket;
|
|
|
|
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
|
|
dep->number);
|
|
if (ret) {
|
|
dev_dbg(dwc->dev, "failed to map request\n");
|
|
return;
|
|
}
|
|
|
|
maxpacket = dep->endpoint.maxpacket;
|
|
if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
|
|
transfer_size = (req->request.length / maxpacket) *
|
|
maxpacket;
|
|
ret = dwc3_ep0_start_trans(dwc, dep->number,
|
|
req->request.dma,
|
|
transfer_size,
|
|
DWC3_TRBCTL_CONTROL_DATA, 1);
|
|
}
|
|
|
|
transfer_size = roundup((req->request.length - transfer_size),
|
|
maxpacket);
|
|
|
|
dwc->ep0_bounced = true;
|
|
|
|
/*
|
|
* REVISIT in case request length is bigger than
|
|
* DWC3_EP0_BOUNCE_SIZE we will need two chained
|
|
* TRBs to handle the transfer.
|
|
*/
|
|
ret = dwc3_ep0_start_trans(dwc, dep->number,
|
|
dwc->ep0_bounce_addr, transfer_size,
|
|
DWC3_TRBCTL_CONTROL_DATA, 0);
|
|
} else {
|
|
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
|
|
dep->number);
|
|
if (ret) {
|
|
dev_dbg(dwc->dev, "failed to map request\n");
|
|
return;
|
|
}
|
|
|
|
ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
|
|
req->request.length,
|
|
DWC3_TRBCTL_CONTROL_DATA, 0);
|
|
}
|
|
|
|
WARN_ON(ret < 0);
|
|
}
|
|
|
|
static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
|
|
{
|
|
struct dwc3 *dwc = dep->dwc;
|
|
u32 type;
|
|
|
|
type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
|
|
: DWC3_TRBCTL_CONTROL_STATUS2;
|
|
|
|
return dwc3_ep0_start_trans(dwc, dep->number,
|
|
dwc->ctrl_req_addr, 0, type, 0);
|
|
}
|
|
|
|
static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
|
|
{
|
|
if (dwc->resize_fifos) {
|
|
dev_dbg(dwc->dev, "Resizing FIFOs");
|
|
dwc3_gadget_resize_tx_fifos(dwc);
|
|
dwc->resize_fifos = 0;
|
|
}
|
|
|
|
WARN_ON(dwc3_ep0_start_control_status(dep));
|
|
}
|
|
|
|
static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
|
|
const struct dwc3_event_depevt *event)
|
|
{
|
|
struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
|
|
|
|
__dwc3_ep0_do_control_status(dwc, dep);
|
|
}
|
|
|
|
static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
|
|
{
|
|
struct dwc3_gadget_ep_cmd_params params;
|
|
u32 cmd;
|
|
int ret;
|
|
|
|
if (!dep->resource_index)
|
|
return;
|
|
|
|
cmd = DWC3_DEPCMD_ENDTRANSFER;
|
|
cmd |= DWC3_DEPCMD_CMDIOC;
|
|
cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
|
|
memset(¶ms, 0, sizeof(params));
|
|
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms);
|
|
WARN_ON_ONCE(ret);
|
|
dep->resource_index = 0;
|
|
}
|
|
|
|
static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
|
|
const struct dwc3_event_depevt *event)
|
|
{
|
|
dwc->setup_packet_pending = true;
|
|
|
|
switch (event->status) {
|
|
case DEPEVT_STATUS_CONTROL_DATA:
|
|
dev_vdbg(dwc->dev, "Control Data");
|
|
|
|
/*
|
|
* We already have a DATA transfer in the controller's cache,
|
|
* if we receive a XferNotReady(DATA) we will ignore it, unless
|
|
* it's for the wrong direction.
|
|
*
|
|
* In that case, we must issue END_TRANSFER command to the Data
|
|
* Phase we already have started and issue SetStall on the
|
|
* control endpoint.
|
|
*/
|
|
if (dwc->ep0_expect_in != event->endpoint_number) {
|
|
struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in];
|
|
|
|
dev_vdbg(dwc->dev, "Wrong direction for Data phase");
|
|
dwc3_ep0_end_control_data(dwc, dep);
|
|
dwc3_ep0_stall_and_restart(dwc);
|
|
return;
|
|
}
|
|
|
|
break;
|
|
|
|
case DEPEVT_STATUS_CONTROL_STATUS:
|
|
if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
|
|
return;
|
|
|
|
dev_vdbg(dwc->dev, "Control Status");
|
|
|
|
dwc->ep0state = EP0_STATUS_PHASE;
|
|
|
|
if (dwc->delayed_status) {
|
|
WARN_ON_ONCE(event->endpoint_number != 1);
|
|
dev_vdbg(dwc->dev, "Delayed Status");
|
|
return;
|
|
}
|
|
|
|
dwc3_ep0_do_control_status(dwc, event);
|
|
}
|
|
}
|
|
|
|
void dwc3_ep0_interrupt(struct dwc3 *dwc,
|
|
const struct dwc3_event_depevt *event)
|
|
{
|
|
u8 epnum = event->endpoint_number;
|
|
|
|
dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'",
|
|
dwc3_ep_event_string(event->endpoint_event),
|
|
epnum >> 1, (epnum & 1) ? "in" : "out",
|
|
dwc3_ep0_state_string(dwc->ep0state));
|
|
|
|
switch (event->endpoint_event) {
|
|
case DWC3_DEPEVT_XFERCOMPLETE:
|
|
dwc3_ep0_xfer_complete(dwc, event);
|
|
break;
|
|
|
|
case DWC3_DEPEVT_XFERNOTREADY:
|
|
dwc3_ep0_xfernotready(dwc, event);
|
|
break;
|
|
|
|
case DWC3_DEPEVT_XFERINPROGRESS:
|
|
case DWC3_DEPEVT_RXTXFIFOEVT:
|
|
case DWC3_DEPEVT_STREAMEVT:
|
|
case DWC3_DEPEVT_EPCMDCMPLT:
|
|
break;
|
|
}
|
|
}
|