u-boot/arch/arm/dts/zynq-zturn-common.dtsi
Michal Simek ce90654d1c xilinx: Sync DTs with Linux kernel
There are several changes which happen in mainline kernel which should get
also to U-Boot. Here is the list of patches from the kernel:

- ARM: zynq: Fix leds subnode name for zc702/zybo-z7
- arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
- arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
- arm64: dts: zynqmp: Wire up the DisplayPort subsystem
- arm64: dts: zynqmp: Add DisplayPort subsystem
- arm64: dts: zynqmp: Add DPDMA node
- arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
- arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
- arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
- arm64: dts: zynqmp-zcu100-revC: correct interrupt flags
- arm64: dts: xilinx: align GPIO hog names with dtschema
- arm64: zynqmp: Add Xilinx AES node
- dt: bindings: dma: xilinx: dpdma: DT bindings for Xilinx DPDMA

but also some other changes have been done.
- Using only one compatible string for adxl345 on zturn
- Remove Xilinx internal DP bindings
- Remove USB3.0 serdes configurations
- Remove SATA serdes configuration for zc1232
- Resort nvmem_firmware
- Update nand compatible string
- Aling power-domains property for sd0/1

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00

120 lines
1.7 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
* Copyright (C) 2017 Alexander Graf <agraf@suse.de>
*
* Based on zynq-zed.dts which is:
* Copyright (C) 2011 - 2014 Xilinx
* Copyright (C) 2012 National Instruments Corp.
*
*/
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
compatible = "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
serial0 = &uart1;
serial1 = &uart0;
mmc0 = &sdhci0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
usr-led1 {
label = "usr-led1";
gpios = <&gpio0 0x0 0x1>;
default-state = "off";
};
usr-led2 {
label = "usr-led2";
gpios = <&gpio0 0x9 0x1>;
default-state = "off";
};
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
K1 {
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
wakeup-source;
autorepeat;
};
};
};
&clkc {
ps-clk-frequency = <33333333>;
};
&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy>;
ethernet_phy: ethernet-phy@0 {
};
};
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&can0 {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
stlm75@49 {
status = "okay";
compatible = "lm75";
reg = <0x49>;
};
accelerometer@53 {
compatible = "adi,adxl345";
reg = <0x53>;
interrupt-parent = <&intc>;
interrupts = <0x0 0x1e 0x4>;
};
};