u-boot/arch/arm/dts/uniphier-ld20-akebi96.dts
Kunihiko Hayashi 9e9074bcdd ARM: dts: uniphier: Add support for Akebi96
Add the device tree for Akebi96. Akebi96 is a 96boards certified
development board based on UniPhier LD20.
( https://www.96boards.org/product/akebi96/ )

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2021-07-14 16:48:10 -04:00

189 lines
2.8 KiB
Text

// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
// Device Tree Source for Akebi96 Development Board
//
// Derived from uniphier-ld20-global.dts.
//
// Copyright (C) 2015-2017 Socionext Inc.
// Copyright (C) 2019-2020 Linaro Ltd.
/dts-v1/;
#include <dt-bindings/gpio/uniphier-gpio.h>
#include "uniphier-ld20.dtsi"
/ {
model = "Akebi96";
compatible = "socionext,uniphier-ld20-akebi96",
"socionext,uniphier-ld20";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
ethernet0 = &eth;
};
memory@80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0xc0000000>;
};
framebuffer@c0000000 {
compatible = "simple-framebuffer";
reg = <0 0xc0000000 0 0x02000000>;
width = <1920>;
height = <1080>;
stride = <7680>;
format = "a8r8g8b8";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
memory@c0000000 {
reg = <0 0xc0000000 0 0x02000000>;
no-map;
};
};
sound {
compatible = "audio-graph-card";
label = "UniPhier LD20";
dais = <&spdif_port0
&comp_spdif_port0>;
};
spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
port@0 {
spdif_tx: endpoint {
remote-endpoint = <&spdif_hiecout1>;
};
};
};
comp-spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
port@0 {
comp_spdif_tx: endpoint {
remote-endpoint = <&comp_spdif_hiecout1>;
};
};
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
};
&spi3 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
usb-over-spi@0 {
compatible = "maxim,max3421-udc";
reg = <0>;
spi-max-frequency = <12500000>;
interrupt-parent = <&gpio>;
interrupt-names = "udc";
interrupts = <0 2>;
};
};
&serial0 {
/* Onboard USB-UART */
status = "okay";
};
&serial2 {
/* LS connector UART1 */
status = "okay";
};
&serial3 {
/* LS connector UART0 */
status = "okay";
};
&spdif_hiecout1 {
remote-endpoint = <&spdif_tx>;
};
&comp_spdif_hiecout1 {
remote-endpoint = <&comp_spdif_tx>;
};
&i2c0 {
/* LS connector I2C0 */
status = "okay";
};
&i2c1 {
/* LS connector I2C1 */
status = "okay";
};
&eth {
status = "okay";
phy-handle = <&ethphy>;
};
&mdio {
ethphy: ethernet-phy@0 {
reg = <0>;
};
};
&usb {
status = "okay";
};
&pcie {
status = "okay";
};
&gpio {
/* IRQs for Max3421 */
xirq0 {
gpio-hog;
gpios = <UNIPHIER_GPIO_IRQ(0) 1>;
input;
};
xirq10 {
gpio-hog;
gpios = <UNIPHIER_GPIO_IRQ(10) 1>;
input;
};
};
&pinctrl_aout1 {
groups = "aout1b";
};
&pinctrl_uart3 {
groups = "uart3", "uart3_ctsrts";
};