u-boot/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
Christoph Muellner 1621afc84f rockchip: rk3399-puma: Restore correct VDD_LOG supply.
A commit from last year re-imported the DTS files form the upstream kernel.
By doing so the VDD_LOG regulator in the board's DTS was dropped.
Let's restore this, but move it into the u-boot overlay to prevent this
issue in the future.

Fixes: 167efc2c7a ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux")
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00

75 lines
1.7 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
#include "rk3399-u-boot.dtsi"
#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1333
#include "rk3399-sdram-ddr3-1333.dtsi"
#endif
#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1600
#include "rk3399-sdram-ddr3-1600.dtsi"
#endif
#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1866
#include "rk3399-sdram-ddr3-1866.dtsi"
#endif
/ {
config {
u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
u-boot,boot-led = "module_led";
sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
};
chosen {
stdout-path = "serial0:115200n8";
u-boot,spl-boot-order = \
"same-as-spl", &norflash, &sdhci, &sdmmc;
};
aliases {
spi5 = &spi5;
};
/*
* The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
* eMMC and SPI flash powered-down initially (in fact it keeps the
* reset signal asserted). Even though it is an enable signal, we
* model this as a regulator.
*/
bios_enable: bios_enable {
compatible = "regulator-fixed";
u-boot,dm-pre-reloc;
regulator-name = "bios_enable";
enable-active-high;
gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-init-microvolt = <950000>;
vin-supply = <&vcc5v0_sys>;
};
};
&gpio1 {
u-boot,dm-pre-reloc;
};
&gpio3 {
u-boot,dm-pre-reloc;
};
&norflash {
u-boot,dm-pre-reloc;
};