u-boot/arch/arm/dts/mt7629-rfb.dts
Weijie Gao e8b98f0270 dts: mt7629: enable JTAG pins by default
The EPHY LEDs belongs to the built-in FE switch of MT7629, which is barely
used. These LED pins on reference boards are used as JTAG socket. So it's
a good idea to change the default state to JTAG, and this will make it
convenience for debugging.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-20 16:24:27 -04:00

123 lines
1.7 KiB
Text

/*
* Copyright (C) 2018 MediaTek Inc.
* Author: Ryder Lee <ryder.lee@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
/dts-v1/;
#include "mt7629.dtsi"
#include "mt7629-rfb-u-boot.dtsi"
/ {
model = "MediaTek MT7629 RFB";
compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
aliases {
spi0 = &snor;
};
chosen {
stdout-path = &uart0;
};
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "sgmii";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&pinctrl {
state_default: pinmux_conf {
u-boot,dm-pre-reloc;
mux {
function = "jtag";
groups = "ephy_leds_jtag";
u-boot,dm-pre-reloc;
};
};
snfi_pins: snfi-pins {
mux {
function = "flash";
groups = "snfi";
};
};
snor_pins: snor-pins {
mux {
function = "flash";
groups = "spi_nor";
};
};
uart0_pins: uart0-default {
mux {
function = "uart";
groups = "uart0_txd_rxd";
};
};
watchdog_pins: watchdog-default {
mux {
function = "watchdog";
groups = "watchdog";
};
};
};
&snfi {
pinctrl-names = "default", "snfi";
pinctrl-0 = <&snor_pins>;
pinctrl-1 = <&snfi_pins>;
status = "disabled";
spi-flash@0{
compatible = "jedec,spi-nor";
reg = <0>;
u-boot,dm-pre-reloc;
};
};
&snor {
pinctrl-names = "default";
pinctrl-0 = <&snor_pins>;
status = "okay";
spi-flash@0{
compatible = "jedec,spi-nor";
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
u-boot,dm-pre-reloc;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&xhci {
status = "okay";
};
&u3phy {
status = "okay";
};
&watchdog {
pinctrl-names = "default";
pinctrl-0 = <&watchdog_pins>;
status = "okay";
};