u-boot/arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi
Tim Harvey 53a2b6bd5d imx8m{m,n}-venice-gw7902: add support for GPY111 phy
The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy
due to part availability. Add support for it:
 - increase post-reset time to 300ms per datasheet
 - add tx-delay/rx-delay config

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00

178 lines
2.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 Gateworks Corporation
*/
#include "imx8mm-venice-u-boot.dtsi"
&gpio1 {
m2rst {
gpio-hog;
output-low;
gpios = <13 GPIO_ACTIVE_HIGH>;
line-name = "m2_reset";
};
m2wdis {
gpio-hog;
output-high;
gpios = <15 GPIO_ACTIVE_HIGH>;
line-name = "m2_wdis#";
};
};
&gpio2 {
uart2en {
gpio-hog;
output-high;
gpios = <8 GPIO_ACTIVE_HIGH>;
line-name = "uart2_en#";
};
};
&gpio3 {
m2gdis {
gpio-hog;
output-high;
gpios = <1 GPIO_ACTIVE_HIGH>;
line-name = "m2_gdis#";
};
m2off {
gpio-hog;
output-high;
gpios = <7 GPIO_ACTIVE_HIGH>;
line-name = "m2_off#";
};
};
&gpio4 {
ampgpio3 {
gpio-hog;
input;
gpios = <11 GPIO_ACTIVE_HIGH>;
line-name = "amp_gpio3";
};
ampgpio2 {
gpio-hog;
input;
gpios = <12 GPIO_ACTIVE_HIGH>;
line-name = "amp_gpio2";
};
ampgpio1 {
gpio-hog;
input;
gpios = <14 GPIO_ACTIVE_HIGH>;
line-name = "amp_gpio1";
};
ltrpwr {
gpio-hog;
output-low;
gpios = <16 GPIO_ACTIVE_HIGH>;
line-name = "lte_pwr#";
};
lterst {
gpio-hog;
output-low;
gpios = <17 GPIO_ACTIVE_HIGH>;
line-name = "lte_rst";
};
ampgpio4 {
gpio-hog;
input;
gpios = <20 GPIO_ACTIVE_HIGH>;
line-name = "amp_gpio4";
};
appgpio1 {
gpio-hog;
input;
gpios = <21 GPIO_ACTIVE_HIGH>;
line-name = "app_gpio1";
};
uart1rs485 {
gpio-hog;
output-low;
gpios = <23 GPIO_ACTIVE_HIGH>;
line-name = "uart1_rs485";
};
uart1term {
gpio-hog;
output-low;
gpios = <25 GPIO_ACTIVE_HIGH>;
line-name = "uart1_term";
};
uart1half {
gpio-hog;
output-low;
gpios = <26 GPIO_ACTIVE_HIGH>;
line-name = "uart1_half";
};
appgpio2 {
gpio-hog;
input;
gpios = <27 GPIO_ACTIVE_HIGH>;
line-name = "app_gpio2";
};
mipigpio1 {
gpio-hog;
input;
gpios = <28 GPIO_ACTIVE_HIGH>;
line-name = "mipi_gpio1";
};
};
&gpio5 {
mipigpio4 {
gpio-hog;
input;
gpios = <3 GPIO_ACTIVE_HIGH>;
line-name = "mipi_gpio4";
};
mipigpio3 {
gpio-hog;
input;
gpios = <4 GPIO_ACTIVE_HIGH>;
line-name = "mipi_gpio3";
};
mipigpio2 {
gpio-hog;
input;
gpios = <5 GPIO_ACTIVE_HIGH>;
line-name = "mipi_gpio2";
};
};
&fec1 {
phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
phy-reset-duration = <1>;
phy-reset-post-delay = <300>;
};
&pinctrl_fec1 {
u-boot,dm-spl;
};
&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} {
u-boot,dm-spl;
};
&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} {
u-boot,dm-spl;
};
&pinctrl_pmic {
u-boot,dm-spl;
};