u-boot/arch/arm/dts/ev-imx280-nano-x-mb.dts
Oleh Kravchenko 1180baec98 Add EV-iMX280-NANO-X-MB board
A simple prototyping board with one microSD port, one Ethernet port,
2 USB ports, I2C, SPI, GPIO, and UART interfaces.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:49 +02:00

109 lines
2.1 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
// Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua>
/dts-v1/;
#include "o4-imx6ull-nano.dtsi"
/ {
model = "EV-iMX280-NANO-X-MB";
compatible = "evodbg,ev-imx280-nano-x-mb",
"out4,o4-imx6ull-nano",
"fsl,imx6ull";
aliases {
mmc1 = &usdhc1;
};
chosen {
stdout-path = &uart1;
};
};
&iomuxc {
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10069
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029
>;
};
pinctrl_mdio: mdiogrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0xb0b0 /* RST */
>;
};
pinctrl_usb_otg1_id: usbotg1idgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
>;
};
};
&uart1 {
pinctrl-0 = <&pinctrl_uart1>;
pinctrl-names = "default";
status = "okay";
};
&usdhc1 {
bus-width = <4>;
no-1-8-v;
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-names = "default";
status = "okay";
wakeup-source;
};
&fec1 {
phy-handle = <&phy0>;
phy-mode = "rmii";
phy-reset-duration = <250>;
phy-reset-post-delay = <100>;
phy-reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pinctrl_fec1 &pinctrl_mdio>;
pinctrl-names = "default";
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
clocks = <&clks IMX6UL_CLK_ENET_REF>;
clock-names = "rmii-ref";
interrupt-parent = <&gpio5>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
pinctrl-0 = <&pinctrl_phy0_irq>;
pinctrl-names = "default";
reg = <0>;
};
};
};
&usbotg1 {
dr_mode = "otg";
pinctrl-0 = <&pinctrl_usb_otg1_id>;
pinctrl-names = "default";
status = "okay";
};
&usbotg2 {
dr_mode = "host";
status = "okay";
};