u-boot/arch/arm/dts/at91sam9x5_macb1.dtsi
Wenyou Yang 25e88d406e ARM: dts: at91: Add dts files for at91sam9x5ek
The device tree source files of at91sam9x5ek board are copied from
the Linux v4.10, do the changes below.
 - Add the reg property for the pinctrl node.
 - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's
   slibling nodes, instead of the child nodes.
 - Add the "u-boot,dm-pre-reloc" property to determine which nodes
   are used by the board_init_f stage.
 - Change the compatible of the spi flash to "spi-flash".
 - Add the spi0 aliases.
 - Fix the compilation warnings.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 12:14:15 -06:00

55 lines
1.6 KiB
Text

/*
* at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
* Ethernet interfaces.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* Licensed under GPLv2.
*/
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
ahb {
apb {
pinctrl@fffff400 {
macb1 {
pinctrl_macb1_rmii: macb1_rmii-0 {
atmel,pins =
<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
};
};
};
pmc: pmc@fffffc00 {
periphck {
macb1_clk: macb1_clk@27 {
#clock-cells = <0>;
reg = <27>;
};
};
};
macb1: ethernet@f8030000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xf8030000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
clocks = <&macb1_clk>, <&macb1_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
};
};
};
};