u-boot/arch/arm/dts/am335x-brppt1-spi.dts
Dario Binacchi ff94c15a3c video: omap: add panel driver
The previous version of am335x-fb.c contained the functionalities of two
drivers that this patch has split. It was a video type driver that used
the same registration compatible string that now registers a panel type
driver. The proof of this is that two compatible strings were referred
to within the same driver.
There are now two drivers, each with its own compatible string,
functions and API.
Furthermore, the panel driver, in addition to decoding the display
timings, is now also able to manage the backlight.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-12 10:58:27 +05:30

377 lines
5.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 B&R Industrial Automation GmbH
* http://www.br-automation.com
*
*/
/dts-v1/;
#include "am33xx.dtsi"
/ {
model = "BRPPT1 (MMC) Panel";
compatible = "ti,am33xx";
fset: factory-settings {
bl-version = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
version = <0x0100>;
order-no = "6PPT30 (SPI)";
hw-revision = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
serial-no = "0";
device-id = <0x0>;
parent-id = <0x0>;
hw-variant = <0x1>;
};
aliases {
ds1bkl0 = &pwmbacklight;
ds1bkl1 = &tps_bl;
ds1timing = &timing0;
ds1ctrl = &lcdc;
gpmc = &gpmc;
mmc = &mmc2;
spi0 = &spi0;
fset = &fset;
};
chosen {
bootargs = "console=ttyO0,115200 earlyprintk";
stdout-path = &uart0;
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
panel {
status = "disabled";
compatible = "ti,tilcdc,panel";
enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
backlight = <&pwmbacklight>;
bkl-pwm = <&pwmbacklight>;
bkl-tps = <&tps_bl>;
panel-info {
ac-bias = <255>;
ac-bias-intrpt = <0>;
dma-burst-sz = <16>;
bpp = <32>;
fdd = <0x80>;
sync-edge = <0>;
sync-ctrl = <1>;
raster-order = <0>;
fifo-th = <0>;
};
display-timings {
native-mode = <&timing0>;
timing0: lcd {
clock-frequency = <32000000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <2>;
hback-porch = <192>;
hsync-len = <1>;
vfront-porch = <20>;
vback-porch = <2>;
vsync-len = <1>;
hsync-active = <1>;
vsync-active = <1>;
pupdelay = <10>;
pondelay = <10>;
};
};
};
vmmcsd_fixed: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
pwm0: omap-pwm@timer5 {
compatible = "ti,omap-dmtimer-pwm";
ti,timers = <&timer5>;
#pwm-cells = <3>;
};
pwm1: omap-pwm@timer6 {
compatible = "ti,omap-dmtimer-pwm";
ti,timers = <&timer6>;
#pwm-cells = <3>;
};
beeper: pwm-beep {
compatible = "pwm-beeper";
pwms = <&pwm0 0 0 0>;
};
pwmbacklight: pwm-bkl {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000 0>;
default-brightness-level = <255>;
brightness-levels = <0 16 32 64 128 170 202 234 255>;
power-supply = <&vmmcsd_fixed>;
enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
};
&uart0 { /* console uart */
u-boot,dm-spl;
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
u-boot,dm-spl;
status = "okay";
clock-frequency = <400000>;
tps: tps@24 { /* PMIC controller */
u-boot,dm-spl;
reg = <0x24>;
compatible = "ti,tps65217";
tps_bl: backlight {
compatible = "ti,tps65217-bl";
isel = <1>; /* 1 - ISET1, 2 ISET2 */
fdim = <1000>; /* TPS65217_BL_FDIM_1kHZ */
default-brightness = <50>;
};
};
};
&i2c2 {
status = "okay";
clock-frequency = <100000>;
};
&spi0 {
u-boot,dm-spl;
status = "okay";
cs-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>,
<&gpio0 6 GPIO_ACTIVE_HIGH>,
<0>,
<0>;
spi-max-frequency = <24000000>;
spi_flash: spiflash@0 {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
compatible = "spidev", "jedec,spi-nor";
spi-max-frequency = <24000000>;
reg = <0>;
};
};
&edma {
status = "okay";
};
&cppi41dma {
status = "okay";
};
&usb {
status = "okay";
};
&usb_ctrl_mod {
status = "okay";
};
&usb0_phy {
status = "okay";
};
&usb1_phy {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&usb1 {
status = "okay";
dr_mode = "host";
};
&davinci_mdio {
status = "okay";
phy0: ethernet-phy@0 {
reg = <1>;
};
phy1: ethernet-phy@1 {
reg = <2>;
};
};
&mac {
status = "okay";
};
&cpsw_emac0 {
phy-handle = <&phy0>;
dual_emac_res_vlan = <1>;
phy-mode = "mii";
};
&cpsw_emac1 {
phy-handle = <&phy1>;
dual_emac_res_vlan = <2>;
phy-mode = "mii";
};
&mmc1 {
u-boot,dm-spl;
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <0x4>;
ti,non-removable;
ti,needs-special-hs-handling;
ti,vcc-aux-disable-is-sleep;
status = "okay";
};
&mmc2 {
u-boot,dm-spl;
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <0x8>;
ti,non-removable;
ti,needs-special-hs-handling;
ti,vcc-aux-disable-is-sleep;
status = "okay";
};
&l4_per {
segment@300000 {
target-module@e000 {
u-boot,dm-pre-reloc;
lcdc: lcdc@0 {
u-boot,dm-pre-reloc;
status = "disabled";
};
};
};
};
&elm {
status = "okay";
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
&gpio0 {
u-boot,dm-spl;
ti,no-reset-on-init;
};
&gpio1 {
u-boot,dm-spl;
ti,no-reset-on-init;
};
&gpio2 {
u-boot,dm-spl;
ti,no-reset-on-init;
};
&gpio3 {
u-boot,dm-spl;
ti,no-reset-on-init;
};
&wdt2 {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
&tscadc {
status = "okay";
tsc {
ti,wires = <4>;
ti,x-plate-resistance = <200>;
ti,zx-cutoff-ratio = <40>;
ti,min_deviation = <60>;
ti,max_deviation = <600>;
ti,coordinate-readouts = <5>;
ti,wire-config = <0x00 0x11 0x22 0x33>;
bnr-buttons {
Home-Button {};
};
};
adc {
ti,adc-channels = <5 6 7>;
};
};
&timer6 { /* used for cpsw end device */
status = "okay";
ti,no-reset-on-init;
ti,no-idle-on-init;
};
&timer7 { /* used for cpsw end device */
status = "okay";
ti,no-reset-on-init;
ti,no-idle-on-init;
};
&wdt2 {
status = "okay";
ti,no-reset-on-init;
ti,no-idle-on-init;
};
&epwmss0 {
status = "okay";
};
&tscadc {
status = "okay";
};
&dcan0 {
status = "okay";
};
&dcan1 {
status = "okay";
};
&sham {
status = "disabled";
};
&aes {
status = "disabled";
};
&rng {
status = "disabled";
};