mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 20:43:32 +00:00
77b11f7604
As part of the effort of making U-Boot work with the same device tree as Linux, there is an issue with the "xfi" phy-mode. To be precise, in Linux there was a discussion (for those who have time to read: https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/) which led to a patch: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881 TL;DR: "xfi" was standardized in Linux as "10gbase-r". This patch changes the relevant occurrences in U-Boot to use "10gbase-r" instead of "xfi" wherever applicable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
425 lines
9.3 KiB
C
425 lines
9.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2009-2013 Freescale Semiconductor, Inc.
|
|
* Copyright 2020 NXP
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <env.h>
|
|
#include <fdt_support.h>
|
|
#include <i2c.h>
|
|
#include <image.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <netdev.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fm_eth.h>
|
|
#include "../common/i2c_mux.h"
|
|
|
|
#include "../common/qixis.h"
|
|
#include "../common/vsc3316_3308.h"
|
|
#include "../common/vid.h"
|
|
#include "t208xqds.h"
|
|
#include "t208xqds_qixis.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
u8 sw;
|
|
struct cpu_type *cpu = gd->arch.cpu;
|
|
static const char *freq[4] = {
|
|
"100.00MHZ(from 8T49N222A)", "125.00MHz",
|
|
"156.25MHZ", "100.00MHz"
|
|
};
|
|
|
|
printf("Board: %sQDS, ", cpu->name);
|
|
sw = QIXIS_READ(arch);
|
|
printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
|
|
printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
|
|
|
|
#ifdef CONFIG_SDCARD
|
|
puts("SD/MMC\n");
|
|
#elif CONFIG_SPIFLASH
|
|
puts("SPI\n");
|
|
#else
|
|
sw = QIXIS_READ(brdcfg[0]);
|
|
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank%d\n", sw);
|
|
else if (sw == 0x8)
|
|
puts("Promjet\n");
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
|
#endif
|
|
|
|
printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver),
|
|
qixis_read_tag(buf), (int)qixis_read_minor());
|
|
/* the timestamp string contains "\n" at the end */
|
|
printf(" on %s", qixis_read_time(buf));
|
|
|
|
puts("SERDES Reference Clocks:\n");
|
|
sw = QIXIS_READ(brdcfg[2]);
|
|
printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[sw >> 6],
|
|
freq[(sw >> 4) & 0x3]);
|
|
printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[(sw & 0xf) >> 2],
|
|
freq[sw & 0x3]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_multiplexer_select_vid_channel(u8 channel)
|
|
{
|
|
return select_i2c_ch_pca9547(channel, 0);
|
|
}
|
|
|
|
int brd_mux_lane_to_slot(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 srds_prtcl_s1;
|
|
|
|
srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
#if defined(CONFIG_TARGET_T2080QDS)
|
|
u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
|
|
srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
|
|
#endif
|
|
|
|
switch (srds_prtcl_s1) {
|
|
case 0:
|
|
/* SerDes1 is not enabled */
|
|
break;
|
|
#if defined(CONFIG_TARGET_T2080QDS)
|
|
case 0x1b:
|
|
case 0x1c:
|
|
case 0xa2:
|
|
/* SD1(A:D) => SLOT3 SGMII
|
|
* SD1(G:H) => SLOT1 SGMII
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0x1a);
|
|
break;
|
|
case 0x94:
|
|
case 0x95:
|
|
/* SD1(A:B) => SLOT3 SGMII@1.25bps
|
|
* SD1(C:D) => SFP Module, SGMII@3.125bps
|
|
* SD1(E:H) => SLOT1 SGMII@1.25bps
|
|
*/
|
|
case 0x96:
|
|
/* SD1(A:B) => SLOT3 SGMII@1.25bps
|
|
* SD1(C) => SFP Module, SGMII@3.125bps
|
|
* SD1(D) => SFP Module, SGMII@1.25bps
|
|
* SD1(E:H) => SLOT1 PCIe4 x4
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0x3a);
|
|
break;
|
|
case 0x50:
|
|
case 0x51:
|
|
/* SD1(A:D) => SLOT3 XAUI
|
|
* SD1(E) => SLOT1 PCIe4
|
|
* SD1(F:H) => SLOT2 SGMII
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0x15);
|
|
break;
|
|
case 0x66:
|
|
case 0x67:
|
|
/* SD1(A:D) => 10GBase-R cage
|
|
* SD1(E:H) => SLOT1 PCIe4
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0xfe);
|
|
break;
|
|
case 0x6a:
|
|
case 0x6b:
|
|
/* SD1(A:D) => 10GBase-R cage
|
|
* SD1(E) => SLOT1 PCIe4
|
|
* SD1(F:H) => SLOT2 SGMII
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0xf1);
|
|
break;
|
|
case 0x6c:
|
|
case 0x6d:
|
|
/* SD1(A:B) => 10GBase-R cage
|
|
* SD1(C:D) => SLOT3 SGMII
|
|
* SD1(E:H) => SLOT1 PCIe4
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0xda);
|
|
break;
|
|
case 0x6e:
|
|
/* SD1(A:B) => SFP Module, 10GBase-R
|
|
* SD1(C:D) => SLOT3 SGMII
|
|
* SD1(E:F) => SLOT1 PCIe4 x2
|
|
* SD1(G:H) => SLOT2 SGMII
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0xd9);
|
|
break;
|
|
case 0xda:
|
|
/* SD1(A:H) => SLOT3 PCIe3 x8
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0x0);
|
|
break;
|
|
case 0xc8:
|
|
/* SD1(A) => SLOT3 PCIe3 x1
|
|
* SD1(B) => SFP Module, SGMII@1.25bps
|
|
* SD1(C:D) => SFP Module, SGMII@3.125bps
|
|
* SD1(E:F) => SLOT1 PCIe4 x2
|
|
* SD1(G:H) => SLOT2 SGMII
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0x79);
|
|
break;
|
|
case 0xab:
|
|
/* SD1(A:D) => SLOT3 PCIe3 x4
|
|
* SD1(E:H) => SLOT1 PCIe4 x4
|
|
*/
|
|
QIXIS_WRITE(brdcfg[12], 0x1a);
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("WARNING: unsupported for SerDes1 Protocol %d\n",
|
|
srds_prtcl_s1);
|
|
return -1;
|
|
}
|
|
|
|
#ifdef CONFIG_TARGET_T2080QDS
|
|
switch (srds_prtcl_s2) {
|
|
case 0:
|
|
/* SerDes2 is not enabled */
|
|
break;
|
|
case 0x01:
|
|
case 0x02:
|
|
/* SD2(A:H) => SLOT4 PCIe1 */
|
|
QIXIS_WRITE(brdcfg[13], 0x10);
|
|
break;
|
|
case 0x15:
|
|
case 0x16:
|
|
/*
|
|
* SD2(A:D) => SLOT4 PCIe1
|
|
* SD2(E:F) => SLOT5 PCIe2
|
|
* SD2(G:H) => SATA1,SATA2
|
|
*/
|
|
QIXIS_WRITE(brdcfg[13], 0xb0);
|
|
break;
|
|
case 0x18:
|
|
/*
|
|
* SD2(A:D) => SLOT4 PCIe1
|
|
* SD2(E:F) => SLOT5 Aurora
|
|
* SD2(G:H) => SATA1,SATA2
|
|
*/
|
|
QIXIS_WRITE(brdcfg[13], 0x78);
|
|
break;
|
|
case 0x1f:
|
|
/*
|
|
* SD2(A:D) => SLOT4 PCIe1
|
|
* SD2(E:H) => SLOT5 PCIe2
|
|
*/
|
|
QIXIS_WRITE(brdcfg[13], 0xa0);
|
|
break;
|
|
case 0x29:
|
|
case 0x2d:
|
|
case 0x2e:
|
|
/*
|
|
* SD2(A:D) => SLOT4 SRIO2
|
|
* SD2(E:H) => SLOT5 SRIO1
|
|
*/
|
|
QIXIS_WRITE(brdcfg[13], 0xa0);
|
|
break;
|
|
case 0x36:
|
|
/*
|
|
* SD2(A:D) => SLOT4 SRIO2
|
|
* SD2(E:F) => Aurora
|
|
* SD2(G:H) => SATA1,SATA2
|
|
*/
|
|
QIXIS_WRITE(brdcfg[13], 0x78);
|
|
break;
|
|
default:
|
|
printf("WARNING: unsupported for SerDes2 Protocol %d\n",
|
|
srds_prtcl_s2);
|
|
return -1;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static void esdhc_adapter_card_ident(void)
|
|
{
|
|
u8 card_id, value;
|
|
|
|
card_id = QIXIS_READ(present) & QIXIS_SDID_MASK;
|
|
|
|
switch (card_id) {
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_EMMC45:
|
|
value = QIXIS_READ(brdcfg[5]);
|
|
value |= (QIXIS_DAT4 | QIXIS_DAT5_6_7);
|
|
QIXIS_WRITE(brdcfg[5], value);
|
|
break;
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY:
|
|
value = QIXIS_READ(pwr_ctl[1]);
|
|
value |= QIXIS_EVDD_BY_SDHC_VS;
|
|
QIXIS_WRITE(pwr_ctl[1], value);
|
|
break;
|
|
case QIXIS_ESDHC_ADAPTER_TYPE_EMMC44:
|
|
value = QIXIS_READ(brdcfg[5]);
|
|
value |= (QIXIS_SDCLKIN | QIXIS_SDCLKOUT);
|
|
QIXIS_WRITE(brdcfg[5], value);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
|
|
|
/* Disable remote I2C connection to qixis fpga */
|
|
QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
|
|
|
|
/*
|
|
* Adjust core voltage according to voltage ID
|
|
* This function changes I2C mux to channel 2.
|
|
*/
|
|
if (adjust_vdd(0))
|
|
printf("Warning: Adjusting core voltage failed.\n");
|
|
|
|
brd_mux_lane_to_slot();
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
|
|
esdhc_adapter_card_ident();
|
|
return 0;
|
|
}
|
|
|
|
unsigned long get_board_sys_clk(void)
|
|
{
|
|
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
|
|
#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
|
|
/* use accurate clock measurement */
|
|
int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
|
|
int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
|
|
u32 val;
|
|
|
|
val = freq * base;
|
|
if (val) {
|
|
debug("SYS Clock measurement is: %d\n", val);
|
|
return val;
|
|
} else {
|
|
printf("Warning: SYS clock measurement is invalid, ");
|
|
printf("using value from brdcfg1.\n");
|
|
}
|
|
#endif
|
|
|
|
switch (sysclk_conf & 0x0F) {
|
|
case QIXIS_SYSCLK_83:
|
|
return 83333333;
|
|
case QIXIS_SYSCLK_100:
|
|
return 100000000;
|
|
case QIXIS_SYSCLK_125:
|
|
return 125000000;
|
|
case QIXIS_SYSCLK_133:
|
|
return 133333333;
|
|
case QIXIS_SYSCLK_150:
|
|
return 150000000;
|
|
case QIXIS_SYSCLK_160:
|
|
return 160000000;
|
|
case QIXIS_SYSCLK_166:
|
|
return 166666666;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
unsigned long get_board_ddr_clk(void)
|
|
{
|
|
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
|
|
#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
|
|
/* use accurate clock measurement */
|
|
int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
|
|
int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
|
|
u32 val;
|
|
|
|
val = freq * base;
|
|
if (val) {
|
|
debug("DDR Clock measurement is: %d\n", val);
|
|
return val;
|
|
} else {
|
|
printf("Warning: DDR clock measurement is invalid, ");
|
|
printf("using value from brdcfg1.\n");
|
|
}
|
|
#endif
|
|
|
|
switch ((ddrclk_conf & 0x30) >> 4) {
|
|
case QIXIS_DDRCLK_100:
|
|
return 100000000;
|
|
case QIXIS_DDRCLK_125:
|
|
return 125000000;
|
|
case QIXIS_DDRCLK_133:
|
|
return 133333333;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = env_get_bootm_low();
|
|
size = env_get_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_of_setup(blob, bd);
|
|
#endif
|
|
|
|
fdt_fixup_liodn(blob);
|
|
fsl_fdt_fixup_dr_usb(blob, bd);
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
#ifndef CONFIG_DM_ETH
|
|
fdt_fixup_fman_ethernet(blob);
|
|
#endif
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|