u-boot/board/freescale/mx35pdk/mx35pdk.c
Stefano Babic eae4988b45 Add support for Freescale's mx35pdk board.
The patch adds suupport for the Freescale's mx35pdk board
(known as well as mx35_3stack).

The board boots from the NOR flash. Following devices
are supported:
 - two ethernet devices (FEC and SMC911x on debug board)
 - I2C
 - PMIC (MC13892) via I2C interface
 - UART
 - NOR flash (64MB)
 - NAND flash (2GB)
 - basic access to mc9sdz60 registers via I2C interface

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-02-02 00:54:43 +01:00

297 lines
8.2 KiB
C

/*
* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
*
* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/mx35_pins.h>
#include <asm/arch/iomux.h>
#include <i2c.h>
#include <fsl_pmic.h>
#include <mc9sdz60.h>
#include <mc13892.h>
#include <linux/types.h>
#include <mxc_gpio.h>
#include <asm/arch/sys_proto.h>
#include <netdev.h>
#ifndef BOARD_LATE_INIT
#error "BOARD_LATE_INIT must be set for this board"
#endif
#ifndef CONFIG_BOARD_EARLY_INIT_F
#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
#endif
#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); })
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
return 0;
}
static void setup_iomux_i2c(void)
{
int pad;
/* setup pins for I2C1 */
mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION);
mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION);
pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \
| PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain);
mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad);
mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad);
}
static void setup_iomux_spi(void)
{
mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION);
mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION);
mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION);
mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION);
mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
}
static void setup_iomux_fec(void)
{
int pad;
/* setup pins for FEC */
mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC);
pad = (PAD_CTL_DRV_3_3V | PAD_CTL_PUE_PUD | PAD_CTL_ODE_CMOS | \
PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW);
mxc_iomux_set_pad(MX35_PIN_FEC_TX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_RX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_RX_DV, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_COL, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_RDATA0, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_TDATA0, pad | PAD_CTL_HYS_CMOS | \
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_TX_EN, pad | PAD_CTL_HYS_CMOS | \
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_MDC, pad | PAD_CTL_HYS_CMOS | \
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_MDIO, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU);
mxc_iomux_set_pad(MX35_PIN_FEC_TX_ERR, pad | PAD_CTL_HYS_CMOS | \
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_RX_ERR, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_CRS, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_RDATA1, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_TDATA1, pad | PAD_CTL_HYS_CMOS | \
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_RDATA2, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_TDATA2, pad | PAD_CTL_HYS_CMOS | \
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_RDATA3, pad | PAD_CTL_HYS_SCHMITZ | \
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX35_PIN_FEC_TDATA3, pad | PAD_CTL_HYS_CMOS | \
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
}
int board_early_init_f(void)
{
struct ccm_regs *ccm =
(struct ccm_regs *)IMX_CCM_BASE;
/* enable clocks */
writel(readl(&ccm->cgr0) |
MXC_CCM_CGR0_EMI_MASK |
MXC_CCM_CGR0_EDI0_MASK |
MXC_CCM_CGR0_EPIT1_MASK,
&ccm->cgr0);
writel(readl(&ccm->cgr1) |
MXC_CCM_CGR1_FEC_MASK |
MXC_CCM_CGR1_GPIO1_MASK |
MXC_CCM_CGR1_GPIO2_MASK |
MXC_CCM_CGR1_GPIO3_MASK |
MXC_CCM_CGR1_I2C1_MASK |
MXC_CCM_CGR1_I2C2_MASK |
MXC_CCM_CGR1_IPU_MASK,
&ccm->cgr1);
/* Setup NAND */
__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
setup_iomux_i2c();
setup_iomux_fec();
setup_iomux_spi();
return 0;
}
int board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_MX35_3DS; /* board id for linux */
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
static inline int pmic_detect(void)
{
int id;
id = pmic_reg_read(REG_IDENTIFICATION);
id = (id >> 6) & 0x7;
if (id == 0x7)
return 1;
return 0;
}
u32 get_board_rev(void)
{
int rev;
rev = pmic_detect();
return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
}
int board_late_init(void)
{
u8 val;
u32 pmic_val;
if (pmic_detect()) {
mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
MUX_CONFIG_ALT1);
pmic_val = pmic_reg_read(REG_SETTING_0);
pmic_reg_write(REG_SETTING_0, pmic_val | VO_1_30V | VO_1_50V);
pmic_val = pmic_reg_read(REG_MODE_0);
pmic_reg_write(REG_MODE_0, pmic_val | VGEN3EN);
mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);
mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);
mxc_gpio_direction(37, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(37, 1);
}
val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
mc9sdz60_reg_write(MC9SDZ60_REG_GPIO_1, val);
mdelay(200);
val = mc9sdz60_reg_read(MC9SDZ60_REG_RESET_1) & 0x7F;
mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
mdelay(200);
val |= 0x80;
mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
return 0;
}
int checkboard(void)
{
struct ccm_regs *ccm =
(struct ccm_regs *)IMX_CCM_BASE;
u32 cpu_rev = get_cpu_rev();
/*
* Be sure that I2C is initialized to check
* the board revision
*/
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/* Print board revision */
printf("Board: MX35 PDK %d.0 ", ((get_board_rev() >> 8) + 1) & 0x0F);
/* Print CPU revision */
printf("i.MX35 %d.%d [", (cpu_rev & 0xF0) >> 4, cpu_rev & 0x0F);
switch (readl(&ccm->rcsr) & 0x0F) {
case 0x0000:
puts("POR");
break;
case 0x0002:
puts("JTAG");
break;
case 0x0004:
puts("RST");
break;
case 0x0008:
puts("WDT");
break;
default:
puts("unknown");
}
puts("]\n");
return 0;
}
int board_eth_init(bd_t *bis)
{
int rc = -ENODEV;
#if defined(CONFIG_SMC911X)
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
cpu_eth_init(bis);
return rc;
}