u-boot/board/emulation/qemu-arm/qemu-arm.c
Ilias Apalodimas e7fb789612 sandbox: Remove OF_HOSTFILE
OF_HOSTFILE is used on sandbox configs only.  Although it's pretty
unique and not causing any confusions,  we are better of having simpler
config options for the DTB.

So let's replace that with the existing OF_BOARD.  U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-27 16:38:26 -04:00

195 lines
3.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2017 Tuomas Tynkkynen
*/
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
#include <fdtdec.h>
#include <init.h>
#include <log.h>
#include <virtio_types.h>
#include <virtio.h>
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
static struct mm_region qemu_arm64_mem_map[] = {
{
/* Flash */
.virt = 0x00000000UL,
.phys = 0x00000000UL,
.size = 0x08000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* Lowmem peripherals */
.virt = 0x08000000UL,
.phys = 0x08000000UL,
.size = 0x38000000,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* RAM */
.virt = 0x40000000UL,
.phys = 0x40000000UL,
.size = 255UL * SZ_1G,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* Highmem PCI-E ECAM memory area */
.virt = 0x4010000000ULL,
.phys = 0x4010000000ULL,
.size = 0x10000000,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* Highmem PCI-E MMIO memory area */
.virt = 0x8000000000ULL,
.phys = 0x8000000000ULL,
.size = 0x8000000000ULL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = qemu_arm64_mem_map;
#endif
int board_init(void)
{
return 0;
}
int board_late_init(void)
{
/*
* Make sure virtio bus is enumerated so that peripherals
* on the virtio bus can be discovered by their drivers
*/
virtio_init();
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
int dram_init_banksize(void)
{
fdtdec_setup_memory_banksize();
return 0;
}
void *board_fdt_blob_setup(int *err)
{
*err = 0;
/* QEMU loads a generated DTB for us at the start of RAM. */
return (void *)CONFIG_SYS_SDRAM_BASE;
}
void enable_caches(void)
{
icache_enable();
dcache_enable();
}
#if defined(CONFIG_EFI_RNG_PROTOCOL)
#include <efi_loader.h>
#include <efi_rng.h>
#include <dm/device-internal.h>
efi_status_t platform_get_rng_device(struct udevice **dev)
{
int ret;
efi_status_t status = EFI_DEVICE_ERROR;
struct udevice *bus, *devp;
for (uclass_first_device(UCLASS_VIRTIO, &bus); bus;
uclass_next_device(&bus)) {
for (device_find_first_child(bus, &devp); devp;
device_find_next_child(&devp)) {
if (device_get_uclass_id(devp) == UCLASS_RNG) {
*dev = devp;
status = EFI_SUCCESS;
break;
}
}
}
if (status != EFI_SUCCESS) {
debug("No rng device found\n");
return EFI_DEVICE_ERROR;
}
if (*dev) {
ret = device_probe(*dev);
if (ret)
return EFI_DEVICE_ERROR;
} else {
debug("Couldn't get child device\n");
return EFI_DEVICE_ERROR;
}
return EFI_SUCCESS;
}
#endif /* CONFIG_EFI_RNG_PROTOCOL */
#ifdef CONFIG_ARM64
#define __W "w"
#else
#define __W
#endif
u8 flash_read8(void *addr)
{
u8 ret;
asm("ldrb %" __W "0, %1" : "=r"(ret) : "m"(*(u8 *)addr));
return ret;
}
u16 flash_read16(void *addr)
{
u16 ret;
asm("ldrh %" __W "0, %1" : "=r"(ret) : "m"(*(u16 *)addr));
return ret;
}
u32 flash_read32(void *addr)
{
u32 ret;
asm("ldr %" __W "0, %1" : "=r"(ret) : "m"(*(u32 *)addr));
return ret;
}
void flash_write8(u8 value, void *addr)
{
asm("strb %" __W "1, %0" : "=m"(*(u8 *)addr) : "r"(value));
}
void flash_write16(u16 value, void *addr)
{
asm("strh %" __W "1, %0" : "=m"(*(u16 *)addr) : "r"(value));
}
void flash_write32(u32 value, void *addr)
{
asm("str %" __W "1, %0" : "=m"(*(u32 *)addr) : "r"(value));
}