mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
4687919684
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
135 lines
3.1 KiB
C
135 lines
3.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Actions Semi OWL SoCs UART driver
|
|
*
|
|
* Copyright (C) 2015 Actions Semi Co., Ltd.
|
|
* Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <serial.h>
|
|
#include <asm/io.h>
|
|
#include <asm/types.h>
|
|
|
|
/* UART Registers */
|
|
#define OWL_UART_CTL (0x0000)
|
|
#define OWL_UART_RXDAT (0x0004)
|
|
#define OWL_UART_TXDAT (0x0008)
|
|
#define OWL_UART_STAT (0x000C)
|
|
|
|
/* UART_CTL Register Definitions */
|
|
#define OWL_UART_CTL_PRS_NONE GENMASK(6, 4)
|
|
#define OWL_UART_CTL_STPS BIT(2)
|
|
#define OWL_UART_CTL_DWLS 3
|
|
|
|
/* UART_STAT Register Definitions */
|
|
#define OWL_UART_STAT_TFES BIT(10) /* TX FIFO Empty Status */
|
|
#define OWL_UART_STAT_RFFS BIT(9) /* RX FIFO full Status */
|
|
#define OWL_UART_STAT_TFFU BIT(6) /* TX FIFO full Status */
|
|
#define OWL_UART_STAT_RFEM BIT(5) /* RX FIFO Empty Status */
|
|
|
|
struct owl_serial_priv {
|
|
phys_addr_t base;
|
|
};
|
|
|
|
int owl_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
/* Driver supports only fixed baudrate */
|
|
return 0;
|
|
}
|
|
|
|
static int owl_serial_getc(struct udevice *dev)
|
|
{
|
|
struct owl_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
if (readl(priv->base + OWL_UART_STAT) & OWL_UART_STAT_RFEM)
|
|
return -EAGAIN;
|
|
|
|
return (int)(readl(priv->base + OWL_UART_RXDAT));
|
|
}
|
|
|
|
static int owl_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct owl_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
if (readl(priv->base + OWL_UART_STAT) & OWL_UART_STAT_TFFU)
|
|
return -EAGAIN;
|
|
|
|
writel(ch, priv->base + OWL_UART_TXDAT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int owl_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct owl_serial_priv *priv = dev_get_priv(dev);
|
|
unsigned int stat = readl(priv->base + OWL_UART_STAT);
|
|
|
|
if (input)
|
|
return !(stat & OWL_UART_STAT_RFEM);
|
|
else
|
|
return !(stat & OWL_UART_STAT_TFES);
|
|
}
|
|
|
|
static int owl_serial_probe(struct udevice *dev)
|
|
{
|
|
struct owl_serial_priv *priv = dev_get_priv(dev);
|
|
struct clk clk;
|
|
u32 uart_ctl;
|
|
int ret;
|
|
|
|
/* Set data, parity and stop bits */
|
|
uart_ctl = readl(priv->base + OWL_UART_CTL);
|
|
uart_ctl &= ~(OWL_UART_CTL_PRS_NONE);
|
|
uart_ctl &= ~(OWL_UART_CTL_STPS);
|
|
uart_ctl |= OWL_UART_CTL_DWLS;
|
|
writel(uart_ctl, priv->base + OWL_UART_CTL);
|
|
|
|
/* Enable UART clock */
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int owl_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct owl_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->base = dev_read_addr(dev);
|
|
if (priv->base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops owl_serial_ops = {
|
|
.putc = owl_serial_putc,
|
|
.pending = owl_serial_pending,
|
|
.getc = owl_serial_getc,
|
|
.setbrg = owl_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id owl_serial_ids[] = {
|
|
{ .compatible = "actions,s900-serial" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_owl) = {
|
|
.name = "serial_owl",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = owl_serial_ids,
|
|
.ofdata_to_platdata = owl_serial_ofdata_to_platdata,
|
|
.priv_auto_alloc_size = sizeof(struct owl_serial_priv),
|
|
.probe = owl_serial_probe,
|
|
.ops = &owl_serial_ops,
|
|
};
|