mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
d863d05439
In preparation for dm conversion convert to OF_CONTROL by adding FIT image support and multi dtb. Add a board_fit_config_name_match to match the dtb based off of EEPROM model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
787 lines
23 KiB
C
787 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014 Gateworks Corporation
|
|
* Author: Tim Harvey <tharvey@gateworks.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <hang.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/mx6-ddr.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <env.h>
|
|
#include <i2c.h>
|
|
#include <spl.h>
|
|
|
|
#include "gsc.h"
|
|
#include "common.h"
|
|
|
|
#define RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */
|
|
#define GSC_EEPROM_DDR_SIZE 0x2B /* enum (512,1024,2048) MB */
|
|
#define GSC_EEPROM_DDR_WIDTH 0x2D /* enum (32,64) bit */
|
|
|
|
/* configure MX6Q/DUAL mmdc DDR io registers */
|
|
struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
|
|
/* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
|
|
.dram_sdclk_0 = 0x00020030,
|
|
.dram_sdclk_1 = 0x00020030,
|
|
.dram_cas = 0x00020030,
|
|
.dram_ras = 0x00020030,
|
|
.dram_reset = 0x00020030,
|
|
/* SDCKE[0:1]: 100k pull-up */
|
|
.dram_sdcke0 = 0x00003000,
|
|
.dram_sdcke1 = 0x00003000,
|
|
/* SDBA2: pull-up disabled */
|
|
.dram_sdba2 = 0x00000000,
|
|
/* SDODT[0:1]: 100k pull-up, 40 ohm */
|
|
.dram_sdodt0 = 0x00003030,
|
|
.dram_sdodt1 = 0x00003030,
|
|
/* SDQS[0:7]: Differential input, 40 ohm */
|
|
.dram_sdqs0 = 0x00000030,
|
|
.dram_sdqs1 = 0x00000030,
|
|
.dram_sdqs2 = 0x00000030,
|
|
.dram_sdqs3 = 0x00000030,
|
|
.dram_sdqs4 = 0x00000030,
|
|
.dram_sdqs5 = 0x00000030,
|
|
.dram_sdqs6 = 0x00000030,
|
|
.dram_sdqs7 = 0x00000030,
|
|
|
|
/* DQM[0:7]: Differential input, 40 ohm */
|
|
.dram_dqm0 = 0x00020030,
|
|
.dram_dqm1 = 0x00020030,
|
|
.dram_dqm2 = 0x00020030,
|
|
.dram_dqm3 = 0x00020030,
|
|
.dram_dqm4 = 0x00020030,
|
|
.dram_dqm5 = 0x00020030,
|
|
.dram_dqm6 = 0x00020030,
|
|
.dram_dqm7 = 0x00020030,
|
|
};
|
|
|
|
/* configure MX6Q/DUAL mmdc GRP io registers */
|
|
struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
|
|
/* DDR3 */
|
|
.grp_ddr_type = 0x000c0000,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
/* disable DDR pullups */
|
|
.grp_ddrpke = 0x00000000,
|
|
/* ADDR[00:16], SDBA[0:1]: 40 ohm */
|
|
.grp_addds = 0x00000030,
|
|
/* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
|
|
.grp_ctlds = 0x00000030,
|
|
/* DATA[00:63]: Differential input, 40 ohm */
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = 0x00000030,
|
|
.grp_b1ds = 0x00000030,
|
|
.grp_b2ds = 0x00000030,
|
|
.grp_b3ds = 0x00000030,
|
|
.grp_b4ds = 0x00000030,
|
|
.grp_b5ds = 0x00000030,
|
|
.grp_b6ds = 0x00000030,
|
|
.grp_b7ds = 0x00000030,
|
|
};
|
|
|
|
/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
|
|
struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
|
|
/* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
|
|
.dram_sdclk_0 = 0x00020030,
|
|
.dram_sdclk_1 = 0x00020030,
|
|
.dram_cas = 0x00020030,
|
|
.dram_ras = 0x00020030,
|
|
.dram_reset = 0x00020030,
|
|
/* SDCKE[0:1]: 100k pull-up */
|
|
.dram_sdcke0 = 0x00003000,
|
|
.dram_sdcke1 = 0x00003000,
|
|
/* SDBA2: pull-up disabled */
|
|
.dram_sdba2 = 0x00000000,
|
|
/* SDODT[0:1]: 100k pull-up, 40 ohm */
|
|
.dram_sdodt0 = 0x00003030,
|
|
.dram_sdodt1 = 0x00003030,
|
|
/* SDQS[0:7]: Differential input, 40 ohm */
|
|
.dram_sdqs0 = 0x00000030,
|
|
.dram_sdqs1 = 0x00000030,
|
|
.dram_sdqs2 = 0x00000030,
|
|
.dram_sdqs3 = 0x00000030,
|
|
.dram_sdqs4 = 0x00000030,
|
|
.dram_sdqs5 = 0x00000030,
|
|
.dram_sdqs6 = 0x00000030,
|
|
.dram_sdqs7 = 0x00000030,
|
|
|
|
/* DQM[0:7]: Differential input, 40 ohm */
|
|
.dram_dqm0 = 0x00020030,
|
|
.dram_dqm1 = 0x00020030,
|
|
.dram_dqm2 = 0x00020030,
|
|
.dram_dqm3 = 0x00020030,
|
|
.dram_dqm4 = 0x00020030,
|
|
.dram_dqm5 = 0x00020030,
|
|
.dram_dqm6 = 0x00020030,
|
|
.dram_dqm7 = 0x00020030,
|
|
};
|
|
|
|
/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
|
|
struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
|
|
/* DDR3 */
|
|
.grp_ddr_type = 0x000c0000,
|
|
/* SDQS[0:7]: Differential input, 40 ohm */
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
/* disable DDR pullups */
|
|
.grp_ddrpke = 0x00000000,
|
|
/* ADDR[00:16], SDBA[0:1]: 40 ohm */
|
|
.grp_addds = 0x00000030,
|
|
/* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
|
|
.grp_ctlds = 0x00000030,
|
|
/* DATA[00:63]: Differential input, 40 ohm */
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = 0x00000030,
|
|
.grp_b1ds = 0x00000030,
|
|
.grp_b2ds = 0x00000030,
|
|
.grp_b3ds = 0x00000030,
|
|
.grp_b4ds = 0x00000030,
|
|
.grp_b5ds = 0x00000030,
|
|
.grp_b6ds = 0x00000030,
|
|
.grp_b7ds = 0x00000030,
|
|
};
|
|
|
|
/* MT41K64M16JT-125 (1Gb density) */
|
|
static struct mx6_ddr3_cfg mt41k64m16jt_125 = {
|
|
.mem_speed = 1600,
|
|
.density = 1,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 13,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
};
|
|
|
|
/* MT41K128M16JT-125 (2Gb density) */
|
|
static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
|
|
.mem_speed = 1600,
|
|
.density = 2,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 14,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
};
|
|
|
|
/* MT41K256M16HA-125 (4Gb density) */
|
|
static struct mx6_ddr3_cfg mt41k256m16ha_125 = {
|
|
.mem_speed = 1600,
|
|
.density = 4,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 15,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
};
|
|
|
|
/* MT41K512M16HA-125 (8Gb density) */
|
|
static struct mx6_ddr3_cfg mt41k512m16ha_125 = {
|
|
.mem_speed = 1600,
|
|
.density = 8,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 16,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
};
|
|
|
|
/*
|
|
* calibration - these are the various CPU/DDR3 combinations we support
|
|
*/
|
|
static struct mx6_mmdc_calibration mx6sdl_64x16_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x004C004E,
|
|
.p0_mpwldectrl1 = 0x00440044,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x42440247,
|
|
.p0_mpdgctrl1 = 0x02310232,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x45424746,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x33382C31,
|
|
};
|
|
|
|
/* TODO: update with calibrated values */
|
|
static struct mx6_mmdc_calibration mx6dq_64x64_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x00190017,
|
|
.p0_mpwldectrl1 = 0x00140026,
|
|
.p1_mpwldectrl0 = 0x0021001C,
|
|
.p1_mpwldectrl1 = 0x0011001D,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x43380347,
|
|
.p0_mpdgctrl1 = 0x433C034D,
|
|
.p1_mpdgctrl0 = 0x032C0324,
|
|
.p1_mpdgctrl1 = 0x03310232,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x3C313539,
|
|
.p1_mprddlctl = 0x37343141,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x36393C39,
|
|
.p1_mpwrdlctl = 0x42344438,
|
|
};
|
|
|
|
/* TODO: update with calibrated values */
|
|
static struct mx6_mmdc_calibration mx6sdl_64x64_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x003C003C,
|
|
.p0_mpwldectrl1 = 0x001F002A,
|
|
.p1_mpwldectrl0 = 0x00330038,
|
|
.p1_mpwldectrl1 = 0x0022003F,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x42410244,
|
|
.p0_mpdgctrl1 = 0x4234023A,
|
|
.p1_mpdgctrl0 = 0x022D022D,
|
|
.p1_mpdgctrl1 = 0x021C0228,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x484A4C4B,
|
|
.p1_mprddlctl = 0x4B4D4E4B,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x33342B32,
|
|
.p1_mpwrdlctl = 0x3933332B,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dq_256x16_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x001B0016,
|
|
.p0_mpwldectrl1 = 0x000C000E,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x4324033A,
|
|
.p0_mpdgctrl1 = 0x00000000,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x40403438,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x40403D36,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6sdl_256x16_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x00420043,
|
|
.p0_mpwldectrl1 = 0x0016001A,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x4238023B,
|
|
.p0_mpdgctrl1 = 0x00000000,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x40404849,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x40402E2F,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dq_128x32_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x00190017,
|
|
.p0_mpwldectrl1 = 0x00140026,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x43380347,
|
|
.p0_mpdgctrl1 = 0x433C034D,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x3C313539,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x36393C39,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6sdl_128x32_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x003C003C,
|
|
.p0_mpwldectrl1 = 0x001F002A,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x42410244,
|
|
.p0_mpdgctrl1 = 0x4234023A,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x484A4C4B,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x33342B32,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dq_128x64_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x00190017,
|
|
.p0_mpwldectrl1 = 0x00140026,
|
|
.p1_mpwldectrl0 = 0x0021001C,
|
|
.p1_mpwldectrl1 = 0x0011001D,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x43380347,
|
|
.p0_mpdgctrl1 = 0x433C034D,
|
|
.p1_mpdgctrl0 = 0x032C0324,
|
|
.p1_mpdgctrl1 = 0x03310232,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x3C313539,
|
|
.p1_mprddlctl = 0x37343141,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x36393C39,
|
|
.p1_mpwrdlctl = 0x42344438,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6sdl_128x64_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x003C003C,
|
|
.p0_mpwldectrl1 = 0x001F002A,
|
|
.p1_mpwldectrl0 = 0x00330038,
|
|
.p1_mpwldectrl1 = 0x0022003F,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x42410244,
|
|
.p0_mpdgctrl1 = 0x4234023A,
|
|
.p1_mpdgctrl0 = 0x022D022D,
|
|
.p1_mpdgctrl1 = 0x021C0228,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x484A4C4B,
|
|
.p1_mprddlctl = 0x4B4D4E4B,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x33342B32,
|
|
.p1_mpwrdlctl = 0x3933332B,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dq_256x32_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x001E001A,
|
|
.p0_mpwldectrl1 = 0x0026001F,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x43370349,
|
|
.p0_mpdgctrl1 = 0x032D0327,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x3D303639,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x32363934,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6sdl_256x32_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0X00480047,
|
|
.p0_mpwldectrl1 = 0X003D003F,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0X423E0241,
|
|
.p0_mpdgctrl1 = 0X022B022C,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0X49454A4A,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0X2E372C32,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dq_256x64_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0X00220021,
|
|
.p0_mpwldectrl1 = 0X00200030,
|
|
.p1_mpwldectrl0 = 0X002D0027,
|
|
.p1_mpwldectrl1 = 0X00150026,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x43330342,
|
|
.p0_mpdgctrl1 = 0x0339034A,
|
|
.p1_mpdgctrl0 = 0x032F0325,
|
|
.p1_mpdgctrl1 = 0x032F022E,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0X3A2E3437,
|
|
.p1_mprddlctl = 0X35312F3F,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0X33363B37,
|
|
.p1_mpwrdlctl = 0X40304239,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6sdl_256x64_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x0048004A,
|
|
.p0_mpwldectrl1 = 0x003F004A,
|
|
.p1_mpwldectrl0 = 0x001E0028,
|
|
.p1_mpwldectrl1 = 0x002C0043,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x02250219,
|
|
.p0_mpdgctrl1 = 0x01790202,
|
|
.p1_mpdgctrl0 = 0x02080208,
|
|
.p1_mpdgctrl1 = 0x016C0175,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x4A4C4D4C,
|
|
.p1_mprddlctl = 0x494C4A48,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x403F3437,
|
|
.p1_mpwrdlctl = 0x383A3930,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6sdl_256x64x2_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x001F003F,
|
|
.p0_mpwldectrl1 = 0x001F001F,
|
|
.p1_mpwldectrl0 = 0x001F004E,
|
|
.p1_mpwldectrl1 = 0x0059001F,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x42220225,
|
|
.p0_mpdgctrl1 = 0x0213021F,
|
|
.p1_mpdgctrl0 = 0x022C0242,
|
|
.p1_mpdgctrl1 = 0x022C0244,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x474A4C4A,
|
|
.p1_mprddlctl = 0x48494C45,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x3F3F3F36,
|
|
.p1_mpwrdlctl = 0x3F36363F,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6sdl_128x64x2_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x001F003F,
|
|
.p0_mpwldectrl1 = 0x001F001F,
|
|
.p1_mpwldectrl0 = 0x001F004E,
|
|
.p1_mpwldectrl1 = 0x0059001F,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x42220225,
|
|
.p0_mpdgctrl1 = 0x0213021F,
|
|
.p1_mpdgctrl0 = 0x022C0242,
|
|
.p1_mpdgctrl1 = 0x022C0244,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x474A4C4A,
|
|
.p1_mprddlctl = 0x48494C45,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x3F3F3F36,
|
|
.p1_mpwrdlctl = 0x3F36363F,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dq_512x32_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x002A0025,
|
|
.p0_mpwldectrl1 = 0x003A002A,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x43430356,
|
|
.p0_mpdgctrl1 = 0x033C0335,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x4B373F42,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x303E3C36,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dq_512x64_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x00230020,
|
|
.p0_mpwldectrl1 = 0x002F002A,
|
|
.p1_mpwldectrl0 = 0x001D0027,
|
|
.p1_mpwldectrl1 = 0x00100023,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x03250339,
|
|
.p0_mpdgctrl1 = 0x031C0316,
|
|
.p1_mpdgctrl0 = 0x03210331,
|
|
.p1_mpdgctrl1 = 0x031C025A,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x40373C40,
|
|
.p1_mprddlctl = 0x3A373646,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x2E353933,
|
|
.p1_mpwrdlctl = 0x3C2F3F35,
|
|
};
|
|
|
|
static void spl_dram_init(int width, int size_mb, int board_model)
|
|
{
|
|
struct mx6_ddr3_cfg *mem = NULL;
|
|
struct mx6_mmdc_calibration *calib = NULL;
|
|
struct mx6_ddr_sysinfo sysinfo = {
|
|
/* width of data bus:0=16,1=32,2=64 */
|
|
.dsize = width/32,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32, /* 32Gb per CS */
|
|
/* single chip select */
|
|
.ncs = 1,
|
|
.cs1_mirror = 0,
|
|
.rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */
|
|
#ifdef RTT_NOM_120OHM
|
|
.rtt_nom = 2 /*DDR3_RTT_120_OHM*/, /* RTT_Nom = RZQ/2 */
|
|
#else
|
|
.rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */
|
|
#endif
|
|
.walat = 1, /* Write additional latency */
|
|
.ralat = 5, /* Read additional latency */
|
|
.mif3_mode = 3, /* Command prediction working mode */
|
|
.bi_on = 1, /* Bank interleaving enabled */
|
|
.sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
|
|
.rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
|
|
.pd_fast_exit = 1, /* enable precharge power-down fast exit */
|
|
.ddr_type = DDR_TYPE_DDR3,
|
|
.refsel = 1, /* Refresh cycles at 32KHz */
|
|
.refr = 7, /* 8 refresh commands per refresh cycle */
|
|
};
|
|
|
|
/*
|
|
* MMDC Calibration requires the following data:
|
|
* mx6_mmdc_calibration - board-specific calibration (routing delays)
|
|
* these calibration values depend on board routing, SoC, and DDR
|
|
* mx6_ddr_sysinfo - board-specific memory architecture (width/cs/etc)
|
|
* mx6_ddr_cfg - chip specific timing/layout details
|
|
*/
|
|
if (width == 16 && size_mb == 128) {
|
|
mem = &mt41k64m16jt_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
;
|
|
else
|
|
calib = &mx6sdl_64x16_mmdc_calib;
|
|
debug("1gB density\n");
|
|
} else if (width == 16 && size_mb == 256) {
|
|
/* 1x 2Gb density chip - same calib as 2x 2Gb */
|
|
mem = &mt41k128m16jt_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_128x32_mmdc_calib;
|
|
else
|
|
calib = &mx6sdl_128x32_mmdc_calib;
|
|
debug("2gB density\n");
|
|
} else if (width == 16 && size_mb == 512) {
|
|
mem = &mt41k256m16ha_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_256x16_mmdc_calib;
|
|
else
|
|
calib = &mx6sdl_256x16_mmdc_calib;
|
|
debug("4gB density\n");
|
|
} else if (width == 16 && size_mb == 1024) {
|
|
mem = &mt41k512m16ha_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_512x32_mmdc_calib;
|
|
debug("8gB density\n");
|
|
} else if (width == 32 && size_mb == 256) {
|
|
/* Same calib as width==16, size==128 */
|
|
mem = &mt41k64m16jt_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
;
|
|
else
|
|
calib = &mx6sdl_64x16_mmdc_calib;
|
|
debug("1gB density\n");
|
|
} else if (width == 32 && size_mb == 512) {
|
|
mem = &mt41k128m16jt_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_128x32_mmdc_calib;
|
|
else
|
|
calib = &mx6sdl_128x32_mmdc_calib;
|
|
debug("2gB density\n");
|
|
} else if (width == 32 && size_mb == 1024) {
|
|
mem = &mt41k256m16ha_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_256x32_mmdc_calib;
|
|
else
|
|
calib = &mx6sdl_256x32_mmdc_calib;
|
|
debug("4gB density\n");
|
|
} else if (width == 32 && size_mb == 2048) {
|
|
mem = &mt41k512m16ha_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_512x32_mmdc_calib;
|
|
debug("8gB density\n");
|
|
} else if (width == 64 && size_mb == 512) {
|
|
mem = &mt41k64m16jt_125;
|
|
debug("1gB density\n");
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_64x64_mmdc_calib;
|
|
else
|
|
calib = &mx6sdl_64x64_mmdc_calib;
|
|
} else if (width == 64 && size_mb == 1024) {
|
|
mem = &mt41k128m16jt_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_128x64_mmdc_calib;
|
|
else
|
|
calib = &mx6sdl_128x64_mmdc_calib;
|
|
debug("2gB density\n");
|
|
} else if (width == 64 && size_mb == 2048) {
|
|
switch(board_model) {
|
|
case GW5905:
|
|
/* 8xMT41K128M16 (2GiB) fly-by mirrored 2-chipsels */
|
|
mem = &mt41k128m16jt_125;
|
|
debug("2gB density - 2 chipsel\n");
|
|
if (!is_cpu_type(MXC_CPU_MX6Q)) {
|
|
calib = &mx6sdl_128x64x2_mmdc_calib;
|
|
sysinfo.ncs = 2;
|
|
sysinfo.cs_density = 10; /* CS0_END=39 */
|
|
sysinfo.cs1_mirror = 1; /* mirror enabled */
|
|
}
|
|
break;
|
|
default:
|
|
mem = &mt41k256m16ha_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_256x64_mmdc_calib;
|
|
else
|
|
calib = &mx6sdl_256x64_mmdc_calib;
|
|
debug("4gB density\n");
|
|
break;
|
|
}
|
|
} else if (width == 64 && size_mb == 4096) {
|
|
switch(board_model) {
|
|
case GW5903:
|
|
/* 8xMT41K256M16 (4GiB) fly-by mirrored 2-chipsels */
|
|
mem = &mt41k256m16ha_125;
|
|
debug("4gB density - 2 chipsel\n");
|
|
if (!is_cpu_type(MXC_CPU_MX6Q)) {
|
|
calib = &mx6sdl_256x64x2_mmdc_calib;
|
|
sysinfo.ncs = 2;
|
|
sysinfo.cs_density = 18; /* CS0_END=71 */
|
|
sysinfo.cs1_mirror = 1; /* mirror enabled */
|
|
}
|
|
break;
|
|
default:
|
|
mem = &mt41k512m16ha_125;
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &mx6dq_512x64_mmdc_calib;
|
|
debug("8gB density\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!(mem && calib)) {
|
|
puts("Error: Invalid Calibration/Board Configuration\n");
|
|
printf("MEM : %s\n", mem ? "OKAY" : "NULL");
|
|
printf("CALIB : %s\n", calib ? "OKAY" : "NULL");
|
|
printf("CPUTYPE: %s\n",
|
|
is_cpu_type(MXC_CPU_MX6Q) ? "IMX6Q" : "IMX6DL");
|
|
printf("SIZE_MB: %d\n", size_mb);
|
|
printf("WIDTH : %d\n", width);
|
|
hang();
|
|
}
|
|
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
mx6dq_dram_iocfg(width, &mx6dq_ddr_ioregs,
|
|
&mx6dq_grp_ioregs);
|
|
else
|
|
mx6sdl_dram_iocfg(width, &mx6sdl_ddr_ioregs,
|
|
&mx6sdl_grp_ioregs);
|
|
mx6_dram_cfg(&sysinfo, calib, mem);
|
|
}
|
|
|
|
static void ccgr_init(void)
|
|
{
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
writel(0x00C03F3F, &ccm->CCGR0);
|
|
writel(0x0030FC03, &ccm->CCGR1);
|
|
writel(0x0FFFC000, &ccm->CCGR2);
|
|
writel(0x3FF00000, &ccm->CCGR3);
|
|
writel(0xFFFFF300, &ccm->CCGR4); /* enable NAND/GPMI/BCH clks */
|
|
writel(0x0F0000C3, &ccm->CCGR5);
|
|
writel(0x000003FF, &ccm->CCGR6);
|
|
}
|
|
|
|
/*
|
|
* called from C runtime startup code (arch/arm/lib/crt0.S:_main)
|
|
* - we have a stack and a place to store GD, both in SRAM
|
|
* - no variable global data is available
|
|
*/
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
struct ventana_board_info ventana_info;
|
|
int board_model;
|
|
|
|
/* setup clock gating */
|
|
ccgr_init();
|
|
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
/* setup AXI */
|
|
gpr_init();
|
|
|
|
/* iomux and setup of uart/i2c */
|
|
setup_iomux_uart();
|
|
setup_ventana_i2c(0);
|
|
setup_ventana_i2c(1);
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* read/validate EEPROM info to determine board model and SDRAM cfg */
|
|
board_model = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
|
|
|
|
/* configure model-specific gpio */
|
|
setup_iomux_gpio(board_model, &ventana_info);
|
|
|
|
/* provide some some default: 32bit 128MB */
|
|
if (GW_UNKNOWN == board_model)
|
|
hang();
|
|
|
|
/* configure MMDC for SDRAM width/size and per-model calibration */
|
|
spl_dram_init(8 << ventana_info.sdram_width,
|
|
16 << ventana_info.sdram_size,
|
|
board_model);
|
|
}
|
|
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
spl_boot_list[0] = spl_boot_device();
|
|
switch (spl_boot_list[0]) {
|
|
case BOOT_DEVICE_NAND:
|
|
spl_boot_list[1] = BOOT_DEVICE_MMC1;
|
|
spl_boot_list[2] = BOOT_DEVICE_UART;
|
|
break;
|
|
case BOOT_DEVICE_MMC1:
|
|
spl_boot_list[1] = BOOT_DEVICE_UART;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* called from board_init_r after gd setup if CONFIG_SPL_BOARD_INIT defined */
|
|
/* its our chance to print info about boot device */
|
|
void spl_board_init(void)
|
|
{
|
|
u32 boot_device;
|
|
int board_type;
|
|
|
|
/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 */
|
|
boot_device = spl_boot_device();
|
|
|
|
/* read eeprom again now that we have gd */
|
|
board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
|
|
if (board_type == GW_UNKNOWN)
|
|
hang();
|
|
|
|
switch (boot_device) {
|
|
case BOOT_DEVICE_MMC1:
|
|
puts("Booting from MMC\n");
|
|
break;
|
|
case BOOT_DEVICE_NAND:
|
|
puts("Booting from NAND\n");
|
|
break;
|
|
case BOOT_DEVICE_SATA:
|
|
puts("Booting from SATA\n");
|
|
break;
|
|
default:
|
|
puts("Unknown boot device\n");
|
|
}
|
|
|
|
/* PMIC init */
|
|
setup_pmic();
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
/* return 1 if we wish to boot to uboot vs os (falcon mode) */
|
|
int spl_start_uboot(void)
|
|
{
|
|
unsigned char ret = 1;
|
|
|
|
debug("%s\n", __func__);
|
|
#ifdef CONFIG_SPL_ENV_SUPPORT
|
|
env_init();
|
|
env_load();
|
|
debug("boot_os=%s\n", env_get("boot_os"));
|
|
if (env_get_yesno("boot_os") == 1)
|
|
ret = 0;
|
|
#else
|
|
/* use i2c-0:0x50:0x00 for falcon boot mode (0=linux, else uboot) */
|
|
i2c_set_bus_num(0);
|
|
gsc_i2c_read(0x50, 0x0, 1, &ret, 1);
|
|
#endif
|
|
if (!ret)
|
|
gsc_boot_wd_disable();
|
|
|
|
debug("%s booting %s\n", __func__, ret ? "uboot" : "linux");
|
|
return ret;
|
|
}
|
|
#endif
|