u-boot/board/ti/ti814x/mux.c
Matt Porter ea7b96b6aa ti814x_evm: add ti814x evm board support
Add TI814X EVM board directory, config file, and MAINTAINERS
entry. Enable build.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
[trini: Adapt to recent omap_hsmmc requirements, Matt re-tested]
Signed-off-by: Tom Rini <trini@ti.com>
2013-03-24 12:49:12 -04:00

51 lines
1.6 KiB
C

/*
* mux.c
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
#include <asm/io.h>
#include <i2c.h>
#include "evm.h"
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(pincntl70), PULLUP_EN | MODE(0x01)}, /* UART0_RXD */
{OFFSET(pincntl71), PULLUP_EN | MODE(0x01)}, /* UART0_TXD */
{-1},
};
static struct module_pin_mux mmc1_pin_mux[] = {
{OFFSET(pincntl1), PULLUP_EN | MODE(0x01)}, /* SD1_CLK */
{OFFSET(pincntl2), PULLUP_EN | MODE(0x01)}, /* SD1_CMD */
{OFFSET(pincntl3), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[0] */
{OFFSET(pincntl4), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[1] */
{OFFSET(pincntl5), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[2] */
{OFFSET(pincntl6), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[3] */
{OFFSET(pincntl74), PULLUP_EN | MODE(0x40)}, /* SD1_POW */
{OFFSET(pincntl75), MODE(0x40)}, /* SD1_SDWP */
{OFFSET(pincntl80), PULLUP_EN | MODE(0x02)}, /* SD1_SDCD */
{-1},
};
void enable_uart0_pin_mux(void)
{
configure_module_pin_mux(uart0_pin_mux);
}
void enable_mmc1_pin_mux(void)
{
configure_module_pin_mux(mmc1_pin_mux);
}