u-boot/configs/am335x_pdu001_defconfig
Felix Brack bfaaacd3b2 arm: am335x-pdu001: Move from embedded to separate DTB
There is no need for an embedded device tree for this board so let the
build process generate a separate u-boot.dtb file instead.

Signed-off-by: Felix Brack <fb@ltec.ch>
2018-12-12 12:14:23 -05:00

59 lines
1.5 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_AM33XX=y
CONFIG_TARGET_PDU001=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_FAT_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_LOCALVERSION="-EETS-1.0.0"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=1
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SEPARATE=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-pdu001"
# CONFIG_NET is not set
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_BLK=y
CONFIG_SPL_BLK=y
CONFIG_DM_MMC=y
CONFIG_SPL_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_SDHCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_TPS65910=y
CONFIG_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_TPS65910=y
CONFIG_CONS_INDEX=4
CONFIG_SPI=y
# CONFIG_USE_TINY_PRINTF is not set
# CONFIG_EFI_LOADER is not set