mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
105 lines
2.9 KiB
C
105 lines
2.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Board configuration file for Dragonboard 410C
|
|
*
|
|
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
|
|
*/
|
|
|
|
#ifndef __CONFIGS_DRAGONBOARD410C_H
|
|
#define __CONFIGS_DRAGONBOARD410C_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <asm/arch/sysmap-apq8016.h>
|
|
|
|
#define CONFIG_MISC_INIT_R /* To stop autoboot */
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 0x80000000
|
|
/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
|
|
#define PHYS_SDRAM_1_SIZE 0x3da00000
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_64M
|
|
|
|
/* UART */
|
|
|
|
/* Generic Timer Definitions */
|
|
#define COUNTER_FREQUENCY 19000000
|
|
|
|
#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
|
|
|
|
/* Fixup - in init code we switch from device to host mode,
|
|
* it has to be done after each HCD reset */
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
|
|
/* Support all possible USB ethernet dongles */
|
|
|
|
/* Extra Commands */
|
|
/* Enable that for switching of boot partitions */
|
|
/* Disabled by default as some sub-commands can brick eMMC */
|
|
/*#define CONFIG_SUPPORT_EMMC_BOOT */
|
|
|
|
/* BOOTP options */
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(USB, usb, 0) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 0) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/* Does what recovery does */
|
|
#define REFLASH(file, part) \
|
|
"part start mmc 0 "#part" start && "\
|
|
"part size mmc 0 "#part" size && "\
|
|
"tftp $loadaddr "#file" && " \
|
|
"mmc write $loadaddr $start $size && "
|
|
|
|
#define CONFIG_ENV_REFLASH \
|
|
"mmc dev 0 && "\
|
|
"usb start && "\
|
|
"dhcp && "\
|
|
"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
|
|
"mmc write $loadaddr 0 43 && " \
|
|
"mmc rescan && "\
|
|
REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
|
|
REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
|
|
REFLASH(dragonboard/rescue/rpm.mbn, 3)\
|
|
REFLASH(dragonboard/rescue/tz.mbn, 4)\
|
|
REFLASH(dragonboard/rescue/hyp.mbn, 5)\
|
|
REFLASH(dragonboard/rescue/sec.dat, 6)\
|
|
REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
|
|
REFLASH(dragonboard/u-boot.img, 8)\
|
|
"usb stop &&"\
|
|
"echo Reflash completed"
|
|
|
|
/* Environment */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"reflash="CONFIG_ENV_REFLASH"\0"\
|
|
"loadaddr=0x81000000\0" \
|
|
"fdt_high=0xffffffffffffffff\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"linux_image=Image\0" \
|
|
"kernel_addr_r=0x81000000\0"\
|
|
"fdtfile=qcom/apq8016-sbc.dtb\0" \
|
|
"fdt_addr_r=0x83000000\0"\
|
|
"ramdisk_addr_r=0x84000000\0"\
|
|
"scriptaddr=0x90000000\0"\
|
|
"pxefile_addr_r=0x90100000\0"\
|
|
BOOTENV
|
|
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* mmc0 = emmc, mmc1 = sd */
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 64 /* max command args */
|
|
|
|
#endif
|