mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
118 lines
3.2 KiB
ArmAsm
118 lines
3.2 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Board-specific early ddr/sdram init.
|
|
*
|
|
* (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
|
|
*/
|
|
|
|
.equ PPMCR0, 0xfc04002d
|
|
.equ MSCR_SDRAMC, 0xec094060
|
|
.equ MISCCR2, 0xec09001a
|
|
.equ DDR_RCR, 0xfc0b8180
|
|
.equ DDR_PADCR, 0xfc0b81ac
|
|
.equ DDR_CR00, 0xfc0b8000
|
|
.equ DDR_CR06, 0xfc0b8018
|
|
.equ DDR_CR09, 0xfc0b8024
|
|
.equ DDR_CR40, 0xfc0b80a0
|
|
.equ DDR_CR45, 0xfc0b80b4
|
|
.equ DDR_CR56, 0xfc0b80e0
|
|
|
|
.global sbf_dram_init
|
|
.text
|
|
|
|
sbf_dram_init:
|
|
/* CD46 = DDR on */
|
|
move.l #PPMCR0, %a1
|
|
move.b #46, (%a1)
|
|
|
|
/* stmark 2, max drive strength */
|
|
move.l #MSCR_SDRAMC, %a1
|
|
move.b #1, (%a1)
|
|
|
|
/*
|
|
* use cpu clock, seems more realiable
|
|
*
|
|
* DDR2 clock is serviced from DDR controller as input clock / 2
|
|
* so, if clock comes from
|
|
* vco, i.e. 480(vco) / 2, so ddr clock is 240 Mhz (measured)
|
|
* cpu, i.e. 250(cpu) / 2, so ddr clock is 125 Mhz (measured)
|
|
*
|
|
* .
|
|
* / \ DDR2 can't be clocked lower than 125Mhz
|
|
* / ! \ DDR2 init must pass further i/dcache enable test
|
|
* /_____\
|
|
* WARNING
|
|
*/
|
|
|
|
/* cpu / 2 = 125 Mhz for 480 Mhz pll */
|
|
move.l #MISCCR2, %a1
|
|
move.w #0xa01d, (%a1)
|
|
|
|
/* DDR force sw reset settings */
|
|
move.l #DDR_RCR, %a1
|
|
move.l #0x00000000, (%a1)
|
|
move.l #0x40000000, (%a1)
|
|
|
|
/*
|
|
* PAD_ODT_CS: for us seems both 1(75 ohm) and 2(150ohm) are good,
|
|
* 500/700 mV are ok
|
|
*/
|
|
move.l #DDR_PADCR, %a1
|
|
move.l #0x01030203, (%a1) /* as freescale tower */
|
|
|
|
move.l #DDR_CR00, %a1
|
|
move.l #0x01010101, (%a1)+ /* 0x00 */
|
|
move.l #0x00000101, (%a1)+ /* 0x04 */
|
|
move.l #0x01010100, (%a1)+ /* 0x08 */
|
|
move.l #0x01010000, (%a1)+ /* 0x0C */
|
|
move.l #0x00010101, (%a1)+ /* 0x10 */
|
|
move.l #DDR_CR06, %a1
|
|
move.l #0x00010100, (%a1)+ /* 0x18 */
|
|
move.l #0x00000001, (%a1)+ /* 0x1C */
|
|
move.l #0x01000001, (%a1)+ /* 0x20 */
|
|
move.l #0x00000100, (%a1)+ /* 0x24 */
|
|
move.l #0x00010001, (%a1)+ /* 0x28 */
|
|
move.l #0x00000200, (%a1)+ /* 0x2C */
|
|
move.l #0x01000002, (%a1)+ /* 0x30 */
|
|
move.l #0x00000000, (%a1)+ /* 0x34 */
|
|
move.l #0x00000100, (%a1)+ /* 0x38 */
|
|
move.l #0x02000100, (%a1)+ /* 0x3C */
|
|
move.l #0x02000407, (%a1)+ /* 0x40 */
|
|
move.l #0x02030007, (%a1)+ /* 0x44 */
|
|
move.l #0x02000100, (%a1)+ /* 0x48 */
|
|
move.l #0x0A030203, (%a1)+ /* 0x4C */
|
|
move.l #0x00020708, (%a1)+ /* 0x50 */
|
|
move.l #0x00050008, (%a1)+ /* 0x54 */
|
|
move.l #0x04030002, (%a1)+ /* 0x58 */
|
|
move.l #0x00000004, (%a1)+ /* 0x5C */
|
|
move.l #0x020A0000, (%a1)+ /* 0x60 */
|
|
move.l #0x0C00000E, (%a1)+ /* 0x64 */
|
|
move.l #0x00002004, (%a1)+ /* 0x68 */
|
|
move.l #0x00000000, (%a1)+ /* 0x6C */
|
|
move.l #0x00100010, (%a1)+ /* 0x70 */
|
|
move.l #0x00100010, (%a1)+ /* 0x74 */
|
|
move.l #0x00000000, (%a1)+ /* 0x78 */
|
|
move.l #0x07990000, (%a1)+ /* 0x7C */
|
|
move.l #DDR_CR40, %a1
|
|
move.l #0x00000000, (%a1)+ /* 0xA0 */
|
|
move.l #0x00C80064, (%a1)+ /* 0xA4 */
|
|
move.l #0x44520002, (%a1)+ /* 0xA8 */
|
|
move.l #0x00C80023, (%a1)+ /* 0xAC */
|
|
move.l #DDR_CR45, %a1
|
|
move.l #0x0000C350, (%a1) /* 0xB4 */
|
|
move.l #DDR_CR56, %a1
|
|
move.l #0x04000000, (%a1)+ /* 0xE0 */
|
|
move.l #0x03000304, (%a1)+ /* 0xE4 */
|
|
move.l #0x40040000, (%a1)+ /* 0xE8 */
|
|
move.l #0xC0004004, (%a1)+ /* 0xEC */
|
|
move.l #0x0642C000, (%a1)+ /* 0xF0 */
|
|
move.l #0x00000642, (%a1)+ /* 0xF4 */
|
|
move.l #DDR_CR09, %a1
|
|
tpf
|
|
move.l #0x01000100, (%a1) /* 0x24 */
|
|
|
|
move.l #0x2000, %d1
|
|
bsr asm_delay
|
|
|
|
|
|
rts
|