mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
b75d8dc564
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
417 lines
9.4 KiB
C
417 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <fdt_support.h>
|
|
#include <hang.h>
|
|
#include <i2c.h>
|
|
#include <asm/cache.h>
|
|
#include <init.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#ifdef CONFIG_FSL_LS_PPA
|
|
#include <asm/arch/ppa.h>
|
|
#endif
|
|
#include <asm/arch/mmu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <hwconfig.h>
|
|
#include <ahci.h>
|
|
#include <mmc.h>
|
|
#include <scsi.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <env_internal.h>
|
|
#include <fsl_mmdc.h>
|
|
#include <netdev.h>
|
|
#include <fsl_sec.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define BOOT_FROM_UPPER_BANK 0x2
|
|
#define BOOT_FROM_LOWER_BANK 0x1
|
|
|
|
int checkboard(void)
|
|
{
|
|
#ifdef CONFIG_TARGET_LS1012ARDB
|
|
u8 in1;
|
|
int ret, bus_num = 0;
|
|
|
|
puts("Board: LS1012ARDB ");
|
|
|
|
/* Initialize i2c early for Serial flash bank information */
|
|
#if defined(CONFIG_DM_I2C)
|
|
struct udevice *dev;
|
|
|
|
ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_IO_ADDR,
|
|
1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find udev for a bus %d\n", __func__,
|
|
bus_num);
|
|
return -ENXIO;
|
|
}
|
|
ret = dm_i2c_read(dev, I2C_MUX_IO_1, &in1, 1);
|
|
#else /* Non DM I2C support - will be removed */
|
|
i2c_set_bus_num(bus_num);
|
|
ret = i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_1, 1, &in1, 1);
|
|
#endif
|
|
if (ret < 0) {
|
|
printf("Error reading i2c boot information!\n");
|
|
return 0; /* Don't want to hang() on this error */
|
|
}
|
|
|
|
puts("Version");
|
|
switch (in1 & SW_REV_MASK) {
|
|
case SW_REV_A:
|
|
puts(": RevA");
|
|
break;
|
|
case SW_REV_B:
|
|
puts(": RevB");
|
|
break;
|
|
case SW_REV_C:
|
|
puts(": RevC");
|
|
break;
|
|
case SW_REV_C1:
|
|
puts(": RevC1");
|
|
break;
|
|
case SW_REV_C2:
|
|
puts(": RevC2");
|
|
break;
|
|
case SW_REV_D:
|
|
puts(": RevD");
|
|
break;
|
|
case SW_REV_E:
|
|
puts(": RevE");
|
|
break;
|
|
default:
|
|
puts(": unknown");
|
|
break;
|
|
}
|
|
|
|
printf(", boot from QSPI");
|
|
if ((in1 & SW_BOOT_MASK) == SW_BOOT_EMU)
|
|
puts(": emu\n");
|
|
else if ((in1 & SW_BOOT_MASK) == SW_BOOT_BANK1)
|
|
puts(": bank1\n");
|
|
else if ((in1 & SW_BOOT_MASK) == SW_BOOT_BANK2)
|
|
puts(": bank2\n");
|
|
else
|
|
puts("unknown\n");
|
|
#else
|
|
|
|
puts("Board: LS1012A2G5RDB ");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_TFABOOT
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = tfa_get_dram_size();
|
|
if (!gd->ram_size)
|
|
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
int dram_init(void)
|
|
{
|
|
#ifndef CONFIG_TFABOOT
|
|
static const struct fsl_mmdc_info mparam = {
|
|
0x05180000, /* mdctl */
|
|
0x00030035, /* mdpdc */
|
|
0x12554000, /* mdotc */
|
|
0xbabf7954, /* mdcfg0 */
|
|
0xdb328f64, /* mdcfg1 */
|
|
0x01ff00db, /* mdcfg2 */
|
|
0x00001680, /* mdmisc */
|
|
0x0f3c8000, /* mdref */
|
|
0x00002000, /* mdrwd */
|
|
0x00bf1023, /* mdor */
|
|
0x0000003f, /* mdasp */
|
|
0x0000022a, /* mpodtctrl */
|
|
0xa1390003, /* mpzqhwctrl */
|
|
};
|
|
|
|
mmdc_init(&mparam);
|
|
#endif
|
|
|
|
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
|
|
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
|
|
/* This will break-before-make MMU for DDR */
|
|
update_early_mmu_table();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
fsl_lsch2_early_init_f();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
|
|
CONFIG_SYS_CCI400_OFFSET);
|
|
/*
|
|
* Set CCI-400 control override register to enable barrier
|
|
* transaction
|
|
*/
|
|
if (current_el() == 3)
|
|
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
|
|
erratum_a010315();
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_NOWHERE
|
|
gd->env_addr = (ulong)&default_environment[0];
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_CAAM
|
|
sec_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_LS_PPA
|
|
ppa_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_TARGET_LS1012ARDB
|
|
int esdhc_status_fixup(void *blob, const char *compat)
|
|
{
|
|
char esdhc1_path[] = "/soc/esdhc@1580000";
|
|
bool sdhc2_en = false;
|
|
u8 mux_sdhc2;
|
|
u8 io = 0;
|
|
int ret, bus_num = 0;
|
|
|
|
#if defined(CONFIG_DM_I2C)
|
|
struct udevice *dev;
|
|
|
|
ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_IO_ADDR,
|
|
1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find udev for a bus %d\n", __func__,
|
|
bus_num);
|
|
return -ENXIO;
|
|
}
|
|
ret = dm_i2c_read(dev, I2C_MUX_IO_1, &io, 1);
|
|
#else
|
|
i2c_set_bus_num(bus_num);
|
|
/* IO1[7:3] is the field of board revision info. */
|
|
ret = i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_1, 1, &io, 1);
|
|
#endif
|
|
if (ret < 0) {
|
|
printf("Error reading i2c boot information!\n");
|
|
return 0;
|
|
}
|
|
|
|
/* hwconfig method is used for RevD and later versions. */
|
|
if ((io & SW_REV_MASK) <= SW_REV_D) {
|
|
#ifdef CONFIG_HWCONFIG
|
|
if (hwconfig("esdhc1"))
|
|
sdhc2_en = true;
|
|
#endif
|
|
} else {
|
|
/*
|
|
* The I2C IO-expander for mux select is used to control
|
|
* the muxing of various onboard interfaces.
|
|
*
|
|
* IO0[3:2] indicates SDHC2 interface demultiplexer
|
|
* select lines.
|
|
* 00 - SDIO wifi
|
|
* 01 - GPIO (to Arduino)
|
|
* 10 - eMMC Memory
|
|
* 11 - SPI
|
|
*/
|
|
#if defined(CONFIG_DM_I2C)
|
|
ret = dm_i2c_read(dev, I2C_MUX_IO_0, &io, 1);
|
|
#else
|
|
ret = i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_0, 1, &io, 1);
|
|
#endif
|
|
if (ret < 0) {
|
|
printf("Error reading i2c boot information!\n");
|
|
return 0;
|
|
}
|
|
|
|
mux_sdhc2 = (io & 0x0c) >> 2;
|
|
/* Enable SDHC2 only when use SDIO wifi and eMMC */
|
|
if (mux_sdhc2 == 2 || mux_sdhc2 == 0)
|
|
sdhc2_en = true;
|
|
}
|
|
if (sdhc2_en)
|
|
do_fixup_by_path(blob, esdhc1_path, "status", "okay",
|
|
sizeof("okay"), 1);
|
|
else
|
|
do_fixup_by_path(blob, esdhc1_path, "status", "disabled",
|
|
sizeof("disabled"), 1);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
|
{
|
|
arch_fixup_fdt(blob);
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int switch_to_bank1(void)
|
|
{
|
|
u8 data = 0xf4, chip_addr = 0x24, offset_addr = 0x03;
|
|
int ret, bus_num = 0;
|
|
|
|
#if defined(CONFIG_DM_I2C)
|
|
struct udevice *dev;
|
|
|
|
ret = i2c_get_chip_for_busnum(bus_num, chip_addr,
|
|
1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find udev for a bus %d\n", __func__,
|
|
bus_num);
|
|
return -ENXIO;
|
|
}
|
|
/*
|
|
* --------------------------------------------------------------------
|
|
* |bus |I2C address| Device | Notes |
|
|
* --------------------------------------------------------------------
|
|
* |I2C1|0x24, 0x25,| IO expander (CFG,| Provides 16bits of General |
|
|
* | |0x26 | RESET, and INT/ | Purpose parallel Input/Output|
|
|
* | | | KW41GPIO) - NXP | (GPIO) expansion for the |
|
|
* | | | PCAL9555AHF | I2C bus |
|
|
* ----- --------------------------------------------------------------
|
|
* - mount three IO expander(PCAL9555AHF) on I2C1
|
|
*
|
|
* PCAL9555A device address
|
|
* slave address
|
|
* --------------------------------------
|
|
* | 0 | 1 | 0 | 0 | A2 | A1 | A0 | R/W |
|
|
* --------------------------------------
|
|
* | fixed | hardware selectable|
|
|
*
|
|
* Output port 1(Pinter register bits = 0x03)
|
|
*
|
|
* P1_[7~0] = 0xf4
|
|
* P1_0 <---> CFG_MUX_QSPI_S0
|
|
* P1_1 <---> CFG_MUX_QSPI_S1
|
|
* CFG_MUX_QSPI_S[1:0] = 0b00
|
|
*
|
|
* QSPI chip-select demultiplexer select
|
|
* ---------------------------------------------------------------------
|
|
* CFG_MUX_QSPI_S1|CFG_MUX_QSPI_S0| Values
|
|
* ---------------------------------------------------------------------
|
|
* 0 | 0 |CS routed to SPI memory bank1(default)
|
|
* ---------------------------------------------------------------------
|
|
* 0 | 1 |CS routed to SPI memory bank2
|
|
* ---------------------------------------------------------------------
|
|
*
|
|
*/
|
|
ret = dm_i2c_write(dev, offset_addr, &data, 1);
|
|
#else /* Non DM I2C support - will be removed */
|
|
i2c_set_bus_num(bus_num);
|
|
ret = i2c_write(chip_addr, offset_addr, 1, &data, 1);
|
|
#endif
|
|
|
|
if (ret) {
|
|
printf("i2c write error to chip : %u, addr : %u, data : %u\n",
|
|
chip_addr, offset_addr, data);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int switch_to_bank2(void)
|
|
{
|
|
u8 data[2] = {0xfc, 0xf5}, offset_addr[2] = {0x7, 0x3};
|
|
u8 chip_addr = 0x24;
|
|
int ret, i, bus_num = 0;
|
|
|
|
#if defined(CONFIG_DM_I2C)
|
|
struct udevice *dev;
|
|
|
|
ret = i2c_get_chip_for_busnum(bus_num, chip_addr,
|
|
1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find udev for a bus %d\n", __func__,
|
|
bus_num);
|
|
return -ENXIO;
|
|
}
|
|
#else /* Non DM I2C support - will be removed */
|
|
i2c_set_bus_num(bus_num);
|
|
#endif
|
|
|
|
/*
|
|
* 1th step: config port 1
|
|
* - the port 1 pin is enabled as an output
|
|
* 2th step: output port 1
|
|
* - P1_[7:0] output 0xf5,
|
|
* then CFG_MUX_QSPI_S[1:0] equal to 0b01,
|
|
* CS routed to SPI memory bank2
|
|
*/
|
|
for (i = 0; i < sizeof(data); i++) {
|
|
#if defined(CONFIG_DM_I2C)
|
|
ret = dm_i2c_write(dev, offset_addr[i], &data[i], 1);
|
|
#else /* Non DM I2C support - will be removed */
|
|
ret = i2c_write(chip_addr, offset_addr[i], 1, &data[i], 1);
|
|
#endif
|
|
if (ret) {
|
|
printf("i2c write error to chip : %u, addr : %u, data : %u\n",
|
|
chip_addr, offset_addr[i], data[i]);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int convert_flash_bank(int bank)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (bank) {
|
|
case BOOT_FROM_UPPER_BANK:
|
|
ret = switch_to_bank2();
|
|
break;
|
|
case BOOT_FROM_LOWER_BANK:
|
|
ret = switch_to_bank1();
|
|
break;
|
|
default:
|
|
ret = CMD_RET_USAGE;
|
|
break;
|
|
};
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int flash_bank_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
char *const argv[])
|
|
{
|
|
if (argc != 2)
|
|
return CMD_RET_USAGE;
|
|
if (strcmp(argv[1], "1") == 0)
|
|
convert_flash_bank(BOOT_FROM_LOWER_BANK);
|
|
else if (strcmp(argv[1], "2") == 0)
|
|
convert_flash_bank(BOOT_FROM_UPPER_BANK);
|
|
else
|
|
return CMD_RET_USAGE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
boot_bank, 2, 0, flash_bank_cmd,
|
|
"Flash bank Selection Control",
|
|
"bank[1-lower bank/2-upper bank] (e.g. boot_bank 1)"
|
|
);
|