u-boot/include/configs/sunxi-common.h
Tom Rini 0613c36a7a global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00

334 lines
10 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
*
* (C) Copyright 2007-2011
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*
* Configuration settings for the Allwinner sunxi series of boards.
*/
#ifndef _SUNXI_COMMON_CONFIG_H
#define _SUNXI_COMMON_CONFIG_H
#include <asm/arch/cpu.h>
#include <linux/stringify.h>
/* Serial & console */
/* ns16550 reg in the low bits of cpu reg */
#ifdef CONFIG_MACH_SUNIV
/* suniv doesn't have apb2 and uart is connected to apb1 */
#define CFG_SYS_NS16550_CLK 100000000
#else
#define CFG_SYS_NS16550_CLK 24000000
#endif
#ifndef CONFIG_DM_SERIAL
# define CFG_SYS_NS16550_COM1 SUNXI_UART0_BASE
# define CFG_SYS_NS16550_COM2 SUNXI_UART1_BASE
# define CFG_SYS_NS16550_COM3 SUNXI_UART2_BASE
# define CFG_SYS_NS16550_COM4 SUNXI_UART3_BASE
# define CFG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
#endif
/* CPU */
/*
* The DRAM Base differs between some models. We cannot use macros for the
* CONFIG_FOO defines which contain the DRAM base address since they end
* up unexpanded in include/autoconf.mk .
*
* So we have to have this #ifdef #else #endif block for these.
*/
#ifdef CONFIG_MACH_SUN9I
#define SDRAM_OFFSET(x) 0x2##x
#define CFG_SYS_SDRAM_BASE 0x20000000
#elif defined(CONFIG_MACH_SUNIV)
#define SDRAM_OFFSET(x) 0x8##x
#define CFG_SYS_SDRAM_BASE 0x80000000
#else
#define SDRAM_OFFSET(x) 0x4##x
#define CFG_SYS_SDRAM_BASE 0x40000000
/* V3s do not have enough memory to place code at 0x4a000000 */
#endif
/*
* The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
* slightly bigger. Note that it is possible to map the first 32 KiB of the
* A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
* undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
* the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
* A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register
* is known yet.
* H6 has SRAM A1 at 0x00020000.
*/
#define CFG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS
/* FIXME: this may be larger on some SoCs */
#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
#define PHYS_SDRAM_0 CFG_SYS_SDRAM_BASE
#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
/*
* Miscellaneous configurable options
*/
/* FLASH and environment organization */
/*
* We cannot use expressions here, because expressions won't be evaluated in
* autoconf.mk.
*/
#if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000
#ifdef CONFIG_ARM64
/* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
#define LOW_LEVEL_SRAM_STACK 0x00054000
#else
#define LOW_LEVEL_SRAM_STACK 0x00018000
#endif /* !CONFIG_ARM64 */
#elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
#ifdef CONFIG_MACH_SUN50I_H616
#define LOW_LEVEL_SRAM_STACK 0x58000
#else
/* end of SRAM A2 on H6 for now */
#define LOW_LEVEL_SRAM_STACK 0x00118000
#endif
#else
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#endif
/* Ethernet support */
#ifdef CONFIG_ARM64
/*
* Boards seem to come with at least 512MB of DRAM.
* The kernel should go at 512K, which is the default text offset (that will
* be adjusted at runtime if needed).
* There is no compression for arm64 kernels (yet), so leave some space
* for really big kernels, say 256MB for now.
* Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
*/
#define BOOTM_SIZE __stringify(0xa000000)
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000))
#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000))
#define KERNEL_COMP_SIZE __stringify(0xb000000)
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FF00000))
#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256)
/*
* 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
* 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
*/
#define BOOTM_SIZE __stringify(0xa000000)
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000))
#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64)
/*
* 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
* 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
* 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
*/
#define BOOTM_SIZE __stringify(0x2e00000)
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000))
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000))
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000))
#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32)
/*
* 32M RAM minus 2.5MB for u-boot, heap, stack, etc.
* 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script,
* 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB)
*/
#define BOOTM_SIZE __stringify(0x1700000)
#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1d50000))
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1d40000))
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1d00000))
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1d20000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1800000))
#else
#error Need at least 32MB of DRAM. Please adjust load addresses.
#endif
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=" BOOTM_SIZE "\0" \
"kernel_addr_r=" KERNEL_ADDR_R "\0" \
"fdt_addr_r=" FDT_ADDR_R "\0" \
"scriptaddr=" SCRIPT_ADDR_R "\0" \
"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
"fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \
"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
#ifdef CONFIG_ARM64
#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \
"kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \
"kernel_comp_size=" KERNEL_COMP_SIZE "\0"
#else
#define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""
#endif
#define DFU_ALT_INFO_RAM \
"dfu_alt_info_ram=" \
"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
"fdt ram " FDT_ADDR_R " 0x100000;" \
"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
#ifdef CONFIG_MMC
#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
#define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \
BOOTENV_DEV_MMC(MMC, mmc, 0) \
BOOTENV_DEV_MMC(MMC, mmc, 1) \
"bootcmd_mmc_auto=" \
"if test ${mmc_bootdev} -eq 1; then " \
"run bootcmd_mmc1; " \
"run bootcmd_mmc0; " \
"elif test ${mmc_bootdev} -eq 0; then " \
"run bootcmd_mmc0; " \
"run bootcmd_mmc1; " \
"fi\0"
#define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
"mmc_auto "
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
#else
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
#endif
#else
#define BOOT_TARGET_DEVICES_MMC(func)
#endif
#ifdef CONFIG_AHCI
#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
#else
#define BOOT_TARGET_DEVICES_SCSI(func)
#endif
#ifdef CONFIG_USB_STORAGE
#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
#else
#define BOOT_TARGET_DEVICES_USB(func)
#endif
#ifdef CONFIG_CMD_PXE
#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
#else
#define BOOT_TARGET_DEVICES_PXE(func)
#endif
#ifdef CONFIG_CMD_DHCP
#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
#else
#define BOOT_TARGET_DEVICES_DHCP(func)
#endif
/* FEL boot support, auto-execute boot.scr if a script address was provided */
#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
"bootcmd_fel=" \
"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
"echo '(FEL boot)'; " \
"source ${fel_scriptaddr}; " \
"fi\0"
#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
"fel "
#define BOOT_TARGET_DEVICES(func) \
func(FEL, fel, na) \
BOOT_TARGET_DEVICES_MMC(func) \
BOOT_TARGET_DEVICES_SCSI(func) \
BOOT_TARGET_DEVICES_USB(func) \
BOOT_TARGET_DEVICES_PXE(func) \
BOOT_TARGET_DEVICES_DHCP(func)
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
#define BOOTCMD_SUNXI_COMPAT \
"bootcmd_sunxi_compat=" \
"setenv root /dev/mmcblk0p3 rootwait; " \
"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
"echo Loaded environment from uEnv.txt; " \
"env import -t 0x44000000 ${filesize}; " \
"fi; " \
"setenv bootargs console=${console} root=${root} ${extraargs}; " \
"ext2load mmc 0 0x43000000 script.bin && " \
"ext2load mmc 0 0x48000000 uImage && " \
"bootm 0x48000000\0"
#else
#define BOOTCMD_SUNXI_COMPAT
#endif
#include <config_distro_bootcmd.h>
#ifdef CONFIG_USB_KEYBOARD
#define CONSOLE_STDIN_SETTINGS \
"stdin=serial,usbkbd\0"
#else
#define CONSOLE_STDIN_SETTINGS \
"stdin=serial\0"
#endif
#ifdef CONFIG_VIDEO
#define CONSOLE_STDOUT_SETTINGS \
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
#else
#define CONSOLE_STDOUT_SETTINGS \
"stdout=serial\0" \
"stderr=serial\0"
#endif
#define PARTS_DEFAULT \
"name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
"name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
"name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
"name=system,size=-,uuid=${uuid_gpt_system};"
#define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
#ifdef CONFIG_ARM64
#define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
#else
#define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
#endif
#define CONSOLE_ENV_SETTINGS \
CONSOLE_STDIN_SETTINGS \
CONSOLE_STDOUT_SETTINGS
#ifdef CONFIG_ARM64
#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
#else
#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
#endif
#define CFG_EXTRA_ENV_SETTINGS \
CONSOLE_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
MEM_LAYOUT_ENV_EXTRA_SETTINGS \
DFU_ALT_INFO_RAM \
"fdtfile=" FDTFILE "\0" \
"console=ttyS0,115200\0" \
"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
"partitions=" PARTS_DEFAULT "\0" \
BOOTCMD_SUNXI_COMPAT \
BOOTENV
#endif /* _SUNXI_COMMON_CONFIG_H */