u-boot/include/configs/poleg.h
Philip Oberfichtner 111688839a Convert CONFIG_SYS_L2_PL310 to Kconfig
This converts CONFIG_SYS_L2_PL310 to Kconfig.

For omap2 and mvebu the 'select SYS_L2_PL310' locations were
determined using ./tools/moveconfig -i CONFIG_SYS_L2_PL310.

For mx6 I manually chose ARCH_MX6 as 'select' location. The
correctness has been verified using

	$ ./tools/moveconfig.py -f ARCH_MX6 ~SYS_L2_PL310 ~SYS_L2CACHE_OFF
	0 matches

That means whenever an ARCH_MX6 board had SYS_L2_PL310 disabled, this
was correctly reflected in SYS_L2CACHE_OFF. Thus it's safe to insert
the 'select' statement under ARCH_MX6.

Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-09-01 17:18:42 -04:00

39 lines
1.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2021 Nuvoton Technology Corp.
*/
#ifndef __CONFIG_POLEG_H
#define __CONFIG_POLEG_H
#ifndef CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_PL310_BASE 0xF03FC000 /* L2 - Cache Regs Base (4k Space)*/
#endif
#define CONFIG_SYS_BOOTMAPSZ (0x30 << 20)
#define CONFIG_SYS_SDRAM_BASE 0x0
/* Default environemnt variables */
#define CONFIG_SERVERIP 192.168.0.1
#define CONFIG_IPADDR 192.168.0.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"ethact=eth${eth_num}\0" \
"romboot=echo Booting from flash; echo +++ uimage at 0x${uimage_flash_addr}; " \
"echo Using bootargs: ${bootargs};bootm ${uimage_flash_addr}\0" \
"autostart=yes\0" \
"eth_num=0\0" \
"ethaddr=00:00:F7:A0:00:FC\0" \
"eth1addr=00:00:F7:A0:00:FD\0" \
"eth2addr=00:00:F7:A0:00:FE\0" \
"eth3addr=00:00:F7:A0:00:FF\0" \
"common_bootargs=setenv bootargs earlycon=${earlycon} root=/dev/ram " \
"console=${console} mem=${mem} ramdisk_size=48000 basemac=${ethaddr}\0" \
"sd_prog=fatload mmc 0 10000000 image-bmc; cp.b 10000000 80000000 ${filesize}\0" \
"sd_run=fatload mmc 0 10000000 image-bmc; bootm 10200000\0" \
"\0"
#endif