Timur Tabi f2717b47ea powerpc/85xx: clean up and document the QE/FMAN microcode macros ... Several macros are used to identify and locate the microcode binary image that U-boot needs to upload to the QE or Fman. Both the QE and the Fman use the QE Firmware binary format to package their respective microcode data, which is why the same macros are used for both. A given SOC will only have a QE or an Fman, so this is safe. Unfortunately, the current macro definition and usage has inconsistencies. For example, CONFIG_SYS_FMAN_FW_ADDR was used to define the address of Fman firmware in NOR flash, but CONFIG_SYS_QE_FW_IN_NAND contains the address of NAND. There's no way to know by looking at a variable how it's supposed to be used. In the future, the code which uploads QE firmware and Fman firmware will be merged. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>		2011-11-29 08:48:06 -06:00
..
dtsec.c	powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY	2011-10-09 17:57:53 -05:00
eth.c	powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY	2011-10-09 17:57:53 -05:00
fm.c	powerpc/85xx: clean up and document the QE/FMAN microcode macros	2011-11-29 08:48:06 -06:00
fm.h	fm-eth: Add ability for board code to disable a port	2011-10-03 08:52:15 -05:00
init.c	fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree	2011-10-18 00:36:15 -05:00
Makefile	powerpc/p3060: Add SoC related support for P3060 platform	2011-10-03 09:36:28 -05:00
p1023.c	fm: Don't allow disabling of FM1-DTSEC1	2011-10-18 00:36:15 -05:00
p3060.c	fm: Don't allow disabling of FM1-DTSEC1	2011-10-18 00:36:15 -05:00
p4080.c	fm: Don't allow disabling of FM1-DTSEC1	2011-10-18 00:36:15 -05:00
p5020.c	fm: Don't allow disabling of FM1-DTSEC1	2011-10-18 00:36:15 -05:00
tgec.c	powerpc/85xx: Add support for FMan ethernet in Independent mode	2011-09-29 19:01:05 -05:00
tgec_phy.c	powerpc/85xx: Add support for FMan ethernet in Independent mode	2011-09-29 19:01:05 -05:00