mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
a430fa06a4
NAND flavors, like serial and parallel, have a lot in common and would benefit to share code. Let's move raw (parallel) NAND specific code in a raw/ subdirectory, to ease the addition of a core file in nand/ and the introduction of a spi/ subdirectory specific to SPI NANDs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
91 lines
1.9 KiB
C
91 lines
1.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <asm/arch/mpp.h>
|
|
#include <nand.h>
|
|
|
|
/* NAND Flash Soc registers */
|
|
struct kwnandf_registers {
|
|
u32 rd_params; /* 0x10418 */
|
|
u32 wr_param; /* 0x1041c */
|
|
u8 pad[0x10470 - 0x1041c - 4];
|
|
u32 ctrl; /* 0x10470 */
|
|
};
|
|
|
|
static struct kwnandf_registers *nf_reg =
|
|
(struct kwnandf_registers *)KW_NANDF_BASE;
|
|
|
|
static u32 nand_mpp_backup[9] = { 0 };
|
|
|
|
/*
|
|
* hardware specific access to control-lines/bits
|
|
*/
|
|
#define NAND_ACTCEBOOT_BIT 0x02
|
|
|
|
static void kw_nand_hwcontrol(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
struct nand_chip *nc = mtd_to_nand(mtd);
|
|
u32 offs;
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
if (ctrl & NAND_CLE)
|
|
offs = (1 << 0); /* Commands with A[1:0] == 01 */
|
|
else if (ctrl & NAND_ALE)
|
|
offs = (1 << 1); /* Addresses with A[1:0] == 10 */
|
|
else
|
|
return;
|
|
|
|
writeb(cmd, nc->IO_ADDR_W + offs);
|
|
}
|
|
|
|
void kw_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
u32 data;
|
|
static const u32 nand_config[] = {
|
|
MPP0_NF_IO2,
|
|
MPP1_NF_IO3,
|
|
MPP2_NF_IO4,
|
|
MPP3_NF_IO5,
|
|
MPP4_NF_IO6,
|
|
MPP5_NF_IO7,
|
|
MPP18_NF_IO0,
|
|
MPP19_NF_IO1,
|
|
0
|
|
};
|
|
|
|
if (chip >= 0)
|
|
kirkwood_mpp_conf(nand_config, nand_mpp_backup);
|
|
else
|
|
kirkwood_mpp_conf(nand_mpp_backup, NULL);
|
|
|
|
data = readl(&nf_reg->ctrl);
|
|
data |= NAND_ACTCEBOOT_BIT;
|
|
writel(data, &nf_reg->ctrl);
|
|
}
|
|
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
|
|
#if defined(CONFIG_SYS_NAND_NO_SUBPAGE_WRITE)
|
|
nand->options |= NAND_NO_SUBPAGE_WRITE;
|
|
#endif
|
|
#if defined(CONFIG_NAND_ECC_BCH)
|
|
nand->ecc.mode = NAND_ECC_SOFT_BCH;
|
|
#else
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
#endif
|
|
nand->cmd_ctrl = kw_nand_hwcontrol;
|
|
nand->chip_delay = 40;
|
|
nand->select_chip = kw_nand_select_chip;
|
|
return 0;
|
|
}
|