mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
08310cf96e
Add Phytec Mira device tree files, for use with pcm058. >From Linux 5.6, commit 7111951b8d49 upstream Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
287 lines
6.5 KiB
Text
287 lines
6.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2018 PHYTEC Messtechnik GmbH
|
|
* Author: Christian Hemp <c.hemp@phytec.de>
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/regulator/dlg,da9063-regulator.h>
|
|
|
|
/ {
|
|
aliases {
|
|
rtc1 = &da9062_rtc;
|
|
rtc2 = &snvs_rtc;
|
|
};
|
|
|
|
/*
|
|
* Set the minimum memory size here and
|
|
* let the bootloader set the real size.
|
|
*/
|
|
memory@10000000 {
|
|
device_type = "memory";
|
|
reg = <0x10000000 0x8000000>;
|
|
};
|
|
|
|
gpio_leds_som: somleds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpioleds_som>;
|
|
|
|
som-led-green {
|
|
label = "phycore:green";
|
|
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
};
|
|
|
|
&ecspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
m25p80: flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-handle = <ðphy>;
|
|
phy-mode = "rgmii";
|
|
phy-supply = <&vdd_eth_io>;
|
|
phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
|
status = "disabled";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy: ethernet-phy@3 {
|
|
reg = <3>;
|
|
txc-skew-ps = <1680>;
|
|
rxc-skew-ps = <1860>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
|
nand-on-flash-bbt;
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c32";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
pmic@58 {
|
|
compatible = "dlg,da9062";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
reg = <0x58>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
|
|
da9062_rtc: rtc {
|
|
compatible = "dlg,da9062-rtc";
|
|
};
|
|
|
|
da9062_onkey: onkey {
|
|
compatible = "dlg,da9062-onkey";
|
|
};
|
|
|
|
watchdog {
|
|
compatible = "dlg,da9062-watchdog";
|
|
};
|
|
|
|
regulators {
|
|
vdd_arm: buck1 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <925000>;
|
|
regulator-max-microvolt = <1380000>;
|
|
regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_soc: buck2 {
|
|
regulator-name = "vdd_soc";
|
|
regulator-min-microvolt = <1150000>;
|
|
regulator-max-microvolt = <1380000>;
|
|
regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_ddr3_1p5: buck3 {
|
|
regulator-name = "vdd_ddr3";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_eth_1p2: buck4 {
|
|
regulator-name = "vdd_eth";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_snvs: ldo1 {
|
|
regulator-name = "vdd_snvs";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_high: ldo2 {
|
|
regulator-name = "vdd_high";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_eth_io: ldo3 {
|
|
regulator-name = "vdd_eth_io";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
};
|
|
|
|
vdd_emmc_1p8: ldo4 {
|
|
regulator-name = "vdd_emmc";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
®_arm {
|
|
vin-supply = <&vdd_arm>;
|
|
};
|
|
|
|
®_pu {
|
|
vin-supply = <&vdd_soc>;
|
|
};
|
|
|
|
®_soc {
|
|
vin-supply = <&vdd_soc>;
|
|
};
|
|
|
|
&snvs_poweroff {
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc4>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "disabled";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
|
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
|
|
MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpioleds_som: gpioledssomgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpmi_nand: gpminandgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
|
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
|
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
|
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
|
|
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
|
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
|
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
|
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
|
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
|
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
|
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
|
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
|
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
|
MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: pmicgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc4: usdhc4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
|
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
|
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
|
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
|
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
|
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
|
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
|
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
|
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
|
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
|
>;
|
|
};
|
|
};
|