Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 15:41:40 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
Heiko Schocher 3cf02f5ffa imx6: remove not longer supported aristainetos boards 
Removed aristainetos2, 2b, 2b-csl. This boards have been
recalled and destroyed.

Adapt board code to remove stuff not needed anymore.

Fix checkpatch warning, remove fdt_high and initrd_high
from default environment.

Signed-off-by: Heiko Schocher <hs@denx.de>
zu remove
2020-12-06 15:06:16 +01:00

513 lines
10 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0)
/*
* support for the imx6 based aristainetos2 boards
* parts common to all versions
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
*
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
/ {
aliases {
eeprom0 = &i2c_eeprom0;
eeprom1 = &i2c_eeprom1;
eeprom2 = &i2c_eeprom2;
pmic0 = &i2c_pmic0;
};
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x40000000>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
};
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usbotg_vbus: regulator-usbotg-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&ecspi2 {
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
i2c_pmic0: pmic@58 {
compatible = "dlg,da9063";
/* the pmic uses addr 0x58 and 0x59 */
reg = <0x58>;
interrupt-parent = <&gpio1>;
interrupts = <04 0x8>;
regulators {
bcore1 {
regulator-name = "bcore1";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bcore2 {
regulator-name = "bcore2";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bpro {
regulator-name = "bpro";
regulator-always-on = <1>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
bprob {
regulator-name = "bprob";
regulator-always-on = <1>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
bperi {
regulator-name = "bperi";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bmem {
regulator-name = "bmem";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo2 {
regulator-name = "ldo2";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1800000>;
};
ldo3 {
regulator-name = "ldo3";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo4 {
regulator-name = "ldo4";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo5 {
regulator-name = "ldo5";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo6 {
regulator-name = "ldo6";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo7 {
regulator-name = "ldo7";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo8 {
regulator-name = "ldo8";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo9 {
regulator-name = "ldo9";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo10 {
regulator-name = "ldo10";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo11 {
regulator-name = "ldo11";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bio {
regulator-name = "bio";
regulator-always-on = <1>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
tmp103: tmp103@71 {
compatible = "ti,tmp103";
reg = <0x71>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
expander: tca6416@20 {
compatible = "ti,tca6416";
reg = <0x20>;
#gpio-cells = <2>;
gpio-controller;
env_reset {
gpio-hog;
input;
gpios = <6 GPIO_ACTIVE_LOW>;
};
boot_rescue {
gpio-hog;
input;
gpios = <7 GPIO_ACTIVE_LOW>;
};
};
i2c_eeprom2: eeprom@57{
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
rtc@68 {
compatible = "st,m41t11";
reg = <0x68>;
};
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
i2c_eeprom0: eeprom@50{
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
i2c_eeprom1: eeprom@57{
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
};
&gpio2 {
tpm_pp {
gpio-hog;
output-low;
gpios = <17 GPIO_ACTIVE_HIGH>;
};
tpm_reset {
gpio-hog;
output-high;
gpios = <18 GPIO_ACTIVE_HIGH>;
};
};
&gpio6 {
spi_bus_ena {
gpio-hog;
output-high;
gpios = <6 GPIO_ACTIVE_HIGH>;
};
};
&gpio7 {
bootsel0 {
gpio-hog;
input;
gpios = <6 GPIO_ACTIVE_HIGH>;
};
bootsel1 {
gpio-hog;
input;
gpios = <7 GPIO_ACTIVE_HIGH>;
};
bootsel2 {
gpio-hog;
input;
gpios = <1 GPIO_ACTIVE_HIGH>;
};
soft_reset {
gpio-hog;
output-high;
gpios = <13 GPIO_ACTIVE_HIGH>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
txd0-skew-ps = <0>;
txd1-skew-ps = <0>;
txd2-skew-ps = <0>;
txd3-skew-ps = <0>;
status = "okay";
};
&pcie {
reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
uart-has-rtscts;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usbh1_vbus>;
dr_mode = "host";
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usbotg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
dr_mode = "host"; /* fixed configuration, ID pin not checked */
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio>;
pinctrl_audmux: audmux {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */
MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x400100b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
/* make sure pin is GPIO and not ENET_REF_CLK */
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1a0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
/* backlight enable */
MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x400130b0>;
};
pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x400130b0>;
};
};
Reference in a new issue View git blame Copy permalink