u-boot/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
Masahiro Yamada f6b42c1403 ARM: at91: remove non-generic boards
Remove board support for afeb9260, tny_a9260, and sbc35_a9g20.

They have not been converted into Generic Board yet.
See doc/README.generic-board for details.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2015-05-13 13:01:25 +02:00

245 lines
7.1 KiB
C

/*
* (C) Copyright 2007-2008
* Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91sam9_sdramc.h>
#include <asm/arch/gpio.h>
/*
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
* peripheral pins. Good to have if hardware is soldered optionally
* or in case of SPI no slave is selected. Avoid lines to float
* needlessly. Use a short local PUP define.
*
* Due to errata "TXD floats when CTS is inactive" pullups are always
* on for TXD pins.
*/
#ifdef CONFIG_AT91_GPIO_PULLUP
# define PUP CONFIG_AT91_GPIO_PULLUP
#else
# define PUP 0
#endif
void at91_serial0_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */
writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */
writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */
writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
void at91_seriald_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
/* Enable clock */
writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
}
if (cs_mask & (1 << 1)) {
at91_set_b_periph(AT91_PIO_PORTC, 11, 1);
}
if (cs_mask & (1 << 2)) {
at91_set_b_periph(AT91_PIO_PORTC, 16, 1);
}
if (cs_mask & (1 << 3)) {
at91_set_b_periph(AT91_PIO_PORTC, 17, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
}
if (cs_mask & (1 << 5)) {
at91_set_pio_output(AT91_PIO_PORTC, 11, 1);
}
if (cs_mask & (1 << 6)) {
at91_set_pio_output(AT91_PIO_PORTC, 16, 1);
}
if (cs_mask & (1 << 7)) {
at91_set_pio_output(AT91_PIO_PORTC, 17, 1);
}
}
void at91_spi1_hw_init(unsigned long cs_mask)
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */
at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */
at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */
/* Enable clock */
writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
}
if (cs_mask & (1 << 1)) {
at91_set_b_periph(AT91_PIO_PORTC, 5, 1);
}
if (cs_mask & (1 << 2)) {
at91_set_b_periph(AT91_PIO_PORTC, 4, 1);
}
if (cs_mask & (1 << 3)) {
at91_set_b_periph(AT91_PIO_PORTC, 3, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
}
if (cs_mask & (1 << 5)) {
at91_set_pio_output(AT91_PIO_PORTC, 5, 1);
}
if (cs_mask & (1 << 6)) {
at91_set_pio_output(AT91_PIO_PORTC, 4, 1);
}
if (cs_mask & (1 << 7)) {
at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
}
}
#endif
#ifdef CONFIG_MACB
void at91_macb_hw_init(void)
{
/* Enable EMAC clock */
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */
at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */
at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */
at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERX1 */
at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* ERXER */
at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ETXEN */
at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ETX0 */
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ETX1 */
at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* EMDIO */
at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* EMDC */
#ifndef CONFIG_RMII
at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ECRS */
at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECOL */
at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */
at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */
at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */
#if defined(CONFIG_AT91SAM9260EK)
/*
* use PA10, PA11 for ETX2, ETX3.
* PA23 and PA24 are for TWI EEPROM
*/
at91_set_b_periph(AT91_PIO_PORTA, 10, 0); /* ETX2 */
at91_set_b_periph(AT91_PIO_PORTA, 11, 0); /* ETX3 */
#else
at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */
at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */
#if defined(CONFIG_AT91SAM9G20)
/* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
#endif
#endif
at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */
#endif
}
#endif
#if defined(CONFIG_GENERIC_ATMEL_MCI)
void at91_mci_hw_init(void)
{
/* Enable mci clock */
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
writel(1 << ATMEL_ID_MCI, &pmc->pcer);
at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */
#if defined(CONFIG_ATMEL_MCI_PORTB)
at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */
at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */
at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */
at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */
at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */
#else
at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */
at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */
at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */
at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */
at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */
#endif
}
#endif
void at91_sdram_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTC, 16, 0);
at91_set_a_periph(AT91_PIO_PORTC, 17, 0);
at91_set_a_periph(AT91_PIO_PORTC, 18, 0);
at91_set_a_periph(AT91_PIO_PORTC, 19, 0);
at91_set_a_periph(AT91_PIO_PORTC, 20, 0);
at91_set_a_periph(AT91_PIO_PORTC, 21, 0);
at91_set_a_periph(AT91_PIO_PORTC, 22, 0);
at91_set_a_periph(AT91_PIO_PORTC, 23, 0);
at91_set_a_periph(AT91_PIO_PORTC, 24, 0);
at91_set_a_periph(AT91_PIO_PORTC, 25, 0);
at91_set_a_periph(AT91_PIO_PORTC, 26, 0);
at91_set_a_periph(AT91_PIO_PORTC, 27, 0);
at91_set_a_periph(AT91_PIO_PORTC, 28, 0);
at91_set_a_periph(AT91_PIO_PORTC, 29, 0);
at91_set_a_periph(AT91_PIO_PORTC, 30, 0);
at91_set_a_periph(AT91_PIO_PORTC, 31, 0);
}
/* Platform data for the GPIOs */
static const struct at91_port_platdata at91sam9260_plat[] = {
{ ATMEL_BASE_PIOA, "PA" },
{ ATMEL_BASE_PIOB, "PB" },
{ ATMEL_BASE_PIOC, "PC" },
};
U_BOOT_DEVICES(at91sam9260_gpios) = {
{ "gpio_at91", &at91sam9260_plat[0] },
{ "gpio_at91", &at91sam9260_plat[1] },
{ "gpio_at91", &at91sam9260_plat[2] },
};