u-boot/board/toradex/dts/tegra20-colibri_t20_iris.dts
Tom Warren 126685ad44 Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files
Linux dts files were used for those boards that didn't already
have sdhci info populated. Tamonten has their own dtsi file with
common sdhci nodes (sourced from Linux).

Signed-off-by: Tom Warren <twarren@nvidia.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-03-14 11:06:42 -07:00

45 lines
797 B
Text

/dts-v1/;
#include "tegra20.dtsi"
/ {
model = "Toradex Colibri T20";
compatible = "toradex,t20", "nvidia,tegra20";
aliases {
usb0 = "/usb@c5008000";
usb1 = "/usb@c5000000";
usb2 = "/usb@c5004000";
sdhci0 = "/sdhci@c8000600";
};
usb@c5000000 {
dr_mode = "otg";
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */
nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */
};
usb@c5008000 {
nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */
};
nand-controller@70008000 {
nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */
nvidia,width = <8>;
nvidia,timing = <15 100 25 80 25 10 15 10 100>;
nand@0 {
reg = <0>;
compatible = "nand-flash";
};
};
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio 23 1>; /* gpio PC7 */
bus-width = <4>;
};
};